Chevrolet Silverado 2500 HD Classic Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Chevrolet Silverado 2500 HD Classic Power Steering Pump Replacement is $343 with $119 for parts and $224 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Chevrolet Silverado 2500 HD ClassicV8-8.1LService typePower Steering Pump ReplacementEstimate$486.64Shop/Dealer Price$552.06 - $735.36
2007 Chevrolet Silverado 2500 HD ClassicV8-6.6L Turbo DieselService typePower Steering Pump ReplacementEstimate$472.22Shop/Dealer Price$534.82 - $716.00
2007 Chevrolet Silverado 2500 HD ClassicV8-6.0LService typePower Steering Pump ReplacementEstimate$472.22Shop/Dealer Price$534.86 - $716.07
Show example Chevrolet Silverado 2500 HD Classic Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(10)

Rating Summary
9
0
0
1
0
9
0
0
1
0

Brian

19 years of experience
138 reviews
Brian
19 years of experience
Chevrolet Silverado 2500 HD Classic V8-6.0L - Shift Selector Cable - Covington, Georgia
Professional and curious and very informative

Edmar

23 years of experience
246 reviews
Edmar
23 years of experience
Chevrolet Silverado 2500 HD Classic V8-6.6L Turbo Diesel - Check Engine Light is on - Flower Mound, Texas
Great guy that knows what he is doing.

Chris

19 years of experience
600 reviews
Chris
19 years of experience
Chevrolet Silverado 2500 HD Classic V8-6.6L Turbo Diesel - Oil Change - Sugar Land, Texas
He arrived on time and completed the service order timely.

Jermal

34 years of experience
30 reviews
Jermal
34 years of experience
Chevrolet Silverado 2500 HD Classic V8-6.0L - Car does not shift from park to drive - Downey, California
We had called so many mechanics but no one would come out to us we were stuck in parking lot for hours then I gave a call to your mechanic and they sent jermal over Blessing in disguise Amazing service lets us see the problem and fixed it Quick amicable

Excellent Rating

(10)

Rating Summary
9
0
0
1
0
9
0
0
1
0
Number of Chevrolet Silverado 2500 HD Classic services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Wheel Seal
Common signs include grease leaking from the bearings, visible damage to the wheel seal, and noises coming from the tires and wheels.
How to Prepare for the South Carolina Driver’s Written Test
When When you are getting ready to learn how to drive so you can finally get out on the road, it is important to make sure you are well aware of what you need to do to prep for the...
How Air Bags Work
Designed Designed to protect the occupants of a vehicle in the case of an accident, air bags inflate when the vehicle collides with another object, or otherwise suffers a sudden deceleration. Absorbing the energy of the impact, vehicle owners need...

How I change the engine switch position with the key?

The engine switch has four positions: Off, ACC, On, and Start. When you insert the key, the switch will automatically be in the Off position. Rotate the key clockwise one position to reach the ACC position, where some electrical components...

What does the chime mean?

Some of your vehicle’s warning are audible. When this is the case, a chime will sound. There are four things that will cause a charm, and no other audible noise, to sound: 1. One of the front occupants does not...

what is optimal operating temperature supposed to be? is 215 too high?

Hey there. 180 is normal for your car. Although 215 shouldn't hurt anything if it only stays there for a minute or so and cools back down, it really should not be getting this hot. There are different thermostats available...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com