Chevrolet Silverado 2500 HD Classic Exhaust Gas Recirculation/EGR Valve Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Exhaust Gas Recirculation/EGR Valve Replacement Service

How much does a Exhaust Gas Recirculation/EGR Valve Replacement cost?

On average, the cost for a Chevrolet Silverado 2500 HD Classic Exhaust Gas Recirculation/EGR Valve Replacement is $423 with $283 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Chevrolet Silverado 2500 HD ClassicV8-6.6L Turbo DieselService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$1112.58Shop/Dealer Price$1355.58 - $2076.46
2007 Chevrolet Silverado 2500 HD ClassicV8-6.0LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$750.85Shop/Dealer Price$903.90 - $1358.92
2007 Chevrolet Silverado 2500 HD ClassicV8-8.1LService typeExhaust Gas Recirculation/EGR Valve ReplacementEstimate$711.37Shop/Dealer Price$854.57 - $1280.00
Show example Chevrolet Silverado 2500 HD Classic Exhaust Gas Recirculation/EGR Valve Replacement prices

What is the Exhaust Gas Recirculation/EGR Valve all about?

The EGR (Exhaust Gas Recirculation) valve helps lower the car’s exhaust emissions (gases from the tailpipe). It recirculates the portion of the gasses coming out of the engine by putting in back into the intake manifold, where the engine can burn it again, thereby reducing the emissions.

The EGR valve is located in the engine compartment (underneath the hood). Most engines require exhaust gas recirculation to meet emissions standards. If the EGR valve has gone bad, the car will not pass emissions.

Exhaust Gas Recirculation Valve

Keep in mind:

During the EGR valve replacement, your mechanic should also inspect the vacuum hoses connected to the EGR valve. If the vacuum hoses are cracked (leaking), the EGR valve will not function properly.

How it's done:

  • Scan the computer system in the car.
  • Check all vacuum related hoses to EGR valve.
  • Test EGR transducer.
  • Verify the EGR port is not plugged.
  • Remove and replace the EGR valve.
  • Clean the carbon deposit on EGR pintle.
  • Clear the trouble codes and test for proper operation of EGR valve.

Our recommendation:

It is a good idea to get an air induction (carbon cleaning) service performed every 50,000 miles. This will clean out any sludge or carbon build up in the air intake system. Always keep up with regular oil changes; it will help prevent sludge build up in the engine.

What common symptoms indicate you may need to replace the Exhaust Gas Recirculation/EGR Valve?

  • Check Engine light is on.
  • Possible loss of power.
  • Car will not run smoothly (shake, stumble, may stall).

How important is this service?

The EGR valve helps your vehicle recycle gas. The EGR valve is responsible for taking the gas that comes out of the engine, and sending it through the intake manifold, where the engine can utilize it again. Without the EGR valve your vehicle will not recycle and reuse any of its gas, which increases the emissions. Without the EGR, your car will not pass an emission inspection.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(10)

Rating Summary
9
0
0
1
0
9
0
0
1
0

Jermal

34 years of experience
30 reviews
Jermal
34 years of experience
Chevrolet Silverado 2500 HD Classic V8-6.0L - Car does not shift from park to drive - Downey, California
We had called so many mechanics but no one would come out to us we were stuck in parking lot for hours then I gave a call to your mechanic and they sent jermal over Blessing in disguise Amazing service lets us see the problem and fixed it Quick amicable

Edmar

23 years of experience
246 reviews
Edmar
23 years of experience
Chevrolet Silverado 2500 HD Classic V8-6.6L Turbo Diesel - Check Engine Light is on - Flower Mound, Texas
Great guy that knows what he is doing.

Chris

19 years of experience
600 reviews
Chris
19 years of experience
Chevrolet Silverado 2500 HD Classic V8-6.6L Turbo Diesel - Oil Change - Sugar Land, Texas
He arrived on time and completed the service order timely.

Aurelio

37 years of experience
82 reviews
Aurelio
37 years of experience
Chevrolet Silverado 2500 HD Classic V8-6.6L Turbo Diesel - Check Engine Light is on - San Antonio, Texas
Fully explained what he was doing. Produced an estimate of repairs

Excellent Rating

(10)

Rating Summary
9
0
0
1
0
9
0
0
1
0
Number of Chevrolet Silverado 2500 HD Classic services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Transfer a Car Title in North Carolina
In In the state of North Carolina, vehicle ownership is shown by the name on the car’s title. When ownership changes, the title needs to be transferred from the previous owner to the new owner. This happens when a vehicle...
How Bad Driving Prematurely Wears Out Your Car
Bad drivers and bad driving habits can cause strain on car parts, especially the tires, brakes, body, and electrical and steering systems.
A Buyer’s Guide to the 2012 Lexus ES
The The 2012 Lexus ES is a luxury sedan that successfully competes with the Audi A6 and Acura TL. This front-wheel drive sedan has driving comfort while providing a spacious interior whether you are carrying kids or cargo. It offers...

Power steering leaking fluid

The first step is to identify the leaks. (https://www.yourmechanic.com/services/power-steering-fluid-is-leaking-inspection) Most of the time it's a faulty line, other times it's the pump that is leaking, and if the pump has been run low on fluid, the pump may need replacing...

brake rubbing noise

The problem is that you had the brake rotors resurfaced and the pads were not replaced. The old pads surface was not flat when the rotor surface was resurfaced. The raised parts of the pads wore into the rotors first...

Car won't start

If you have a key fob with a good battery, you should be able to toggle the alarm on and off. If your car is Passlock equipped you could try the 30 minute re-learn procedure. You will go through three...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com