Chevrolet Malibu Cruise control is not working Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(1,469)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(1,469)

Cruise control is not working Inspection Service

How much does a Cruise control is not working Inspection cost?

On average, the cost for a Chevrolet Malibu Cruise control is not working Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Chevrolet MalibuL4-2.4L HybridService typeCruise control is not working InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2017 Chevrolet MalibuL4-2.0L TurboService typeCruise control is not working InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2004 Chevrolet MalibuV6-3.5LService typeCruise control is not working InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1975 Chevrolet MalibuV8-5.7LService typeCruise control is not working InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2022 Chevrolet MalibuL4-1.5L TurboService typeCruise control is not working InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2013 Chevrolet MalibuL4-2.4L HybridService typeCruise control is not working InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1965 Chevrolet MalibuV8-4.6LService typeCruise control is not working InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1967 Chevrolet MalibuL6-3.8LService typeCruise control is not working InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Chevrolet Malibu Cruise control is not working Inspection prices

Cruise control can be very convenient when on a long drive or when on the highway. By setting a speed, you can relax your foot and let the vehicle maintain speed. More modern cruise control systems even allow you to maintain speed and a certain distance behind the vehicle in front of you. When cruise control fails, it can be annoying, but when it fails suddenly it may be dangerous. A sudden failure by the cruise control may mean your vehicle is rapidly decelerating. Even when cruise control is on, it is important to remain a vigilant driver.

How this system works:

Cruise control systems have changed as cars have become more modern. Newer cars use a fully electronic setup to maintain speed and may be able to maintain speed and distance behind the car in front of you. These systems are controlled through the vehicle’s computer or ECU (electronic control unit). Older cars may use what is called electromechanical cruise control. In this setup, a vacuum actuator is physically connected to the throttle by a cable or chain. The cable adjusts to increase or decrease throttle position based upon the actions of the actuator. A mechanic will let you know what kind of setup you have on your vehicle.

Common reasons for this to happen:

  • Bad Fuse: Like many electronically controlled systems in your car, the cruise control has a corresponding fuse which will blow to protect the system if it senses a short circuit. When the fuse of for the cruise control blows, the cruise control will stop working altogether.

  • Failing Brake Pedal Switch: The brake pedal switch turns on the vehicles brake lights when it senses that the brake pedal has been pressed. Because cruise control systems have been designed to disengage when the brake pedal is pressed, the cruise control is wired to the brake pedal switch. If the brake pedal switch fails, the car may think the brakes are engaged and not allow the cruise control system to turn on.

  • Failing Speed Sensor: A speed sensor has many purposes including indicating the speed of the vehicle, regulating flow of fuel and ignition timing, and operating the cruise control. If the speed sensor fails the cruise control may stop working. You may also notice that the speedometer has stopped working and the engine has more difficulty when idling.

  • Damaged Vacuum Actuator/Hoses/Cable: On older vehicles, cruise control speed is maintained using a vacuum actuator and a cable connected to the throttle. A vehicle’s cruise control may stop working if the vacuum actuator has stopped working or if there is damage to the vacuum hoses. The system may also fail if the cable linking the actuator to the throttle is broken.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s cruise control system has stopped working. The mechanic will then provide a detailed inspection report outlining the nature of the system failure and the cost of any repairs that need to be made.

How it's done:

The mechanic will first want to connect to the vehicle’s ECU through a code reader/scanner. This will allow the mechanic to read and trouble codes and better diagnose what component may have failed.

If the mechanic determines that there is a bad fuse, he or she will find the corresponding fuse for the cruise control system to see if it has failed. If the fuse has blown, the mechanic will remove it and replace it with a fuse rated for the correct amperage.

If the mechanic believes that the brake pedal switch has failed, he or she will examine the switch to check for any superficial damage. The mechanic should then check the wiring connected to the switch and change it if necessary. When the switch has been replaced, the mechanic should make sure that both the brake lights and the cruise control system are working properly.

To check the speed sensor, the mechanic will have to get underneath the vehicle. While underneath, the mechanic will find the sensor and examine it and the surrounding wires for damage. The mechanic will then replace the sensor and then check the wires going from the sensor up to the speedometer and cruise control switches to endure that they are not frayed.

If the mechanic believes that the vacuum actuator or the corresponding hoses and cable have failed, he or she will open the hood and locate the actuator. The mechanic will first check the hoses and cable to make sure that they are in good working order. He or she will then replace the actuator as necessary.

In all of these repair scenarios the mechanic will ask to test drive the vehicle to make sure that the cruise control is working properly. He or she should also use their code reader/scanner to clear any trouble codes that may have been produced when the cruise control system was not working.

How important is this service?

A failed cruise control system can be a signal that other repairs may need to be made soon. By examining the cruise control, the mechanic is likely to also inspect other systems on the car including the brake lights and speedometer. While driving without cruise control may be an inconvenience, a sudden failure of the cruise control system could be potentially dangerous for a driver who is not vigilant. If you notice that your vehicle’s cruise control has stopped working you should have a mechanic check it to determine the nature of the problem.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(1,469)

Rating Summary
1,373
50
13
10
23
1,373
50
13
10
23

Andrew

11 years of experience
841 reviews
Andrew
11 years of experience
Chevrolet Malibu L4-2.5L - Thermostat Housing - Lees Summit, Missouri
Once again..... Andrew is the man!!!

Jonathan

13 years of experience
171 reviews
Jonathan
13 years of experience
Chevrolet Malibu L4-2.4L - Oil Pressure Light is on - Providence, Rhode Island
Couldn't ask for more. Super helpful, quick and a good guy.

Brian

23 years of experience
658 reviews
Brian
23 years of experience
Chevrolet Malibu L4-2.5L - AC is not working - Jacksonville, Florida
Very professional and knowledgeable.

Victor

11 years of experience
211 reviews
Victor
11 years of experience
Chevrolet Malibu L4-2.4L - Headlight Bulb Replacement (Driver Side Low Beam, Passenger Side Low Beam) - Norfolk, Virginia
He did a good job

Excellent Rating

(1,469)

Rating Summary
1,373
50
13
10
23
1,373
50
13
10
23
Number of Chevrolet Malibu services completed
16159+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

Colorado Parking Laws
Colorado Colorado parking laws: understanding the basics Many drivers in Colorado are well aware of the regulations and laws when they are out driving on the roads. However, they may not be quite as familiar with the laws regarding parking....
How to Install a Car Volt Amp Gauge
When When you think about the number of sensors (https://www.yourmechanic.com/article/what-sensors-do-all-cars-have-and-what-optional-ones-are-there) that your engine has, it seems like there is an endless amount of gauges that can be installed to monitor their readings. Some of these readings are important, but many...
P0872 OBD-II Trouble Code: Transmission Fluid Pressure Sensor/Switch C Circuit Low
P0872 means the transmission fluid pressure is at a problematic level, likely due to a leak, defective pressure pump, or faulty transmission or PCM.

Fluid leaking from transmission to engine gasket

I assume the leak you are seeing is coming from the transmission bell housing where the engine meets the transmission. If fluid is leaking from here it is most likely the front transmission pump seal where the torque convertor goes...

How to start the car again?

When you try to start the vehicle, a small amount of fuel is injected into the cylinders to promote fast starting. Sometimes what happens is that with multiple attempts at starting, the vehicle essentially floods itself to the point that...

I turn the key and don't hear a sound, no click , lights/radio comes on though. New alternator, new battery. 2005 Pontiac vibe.

You may have a theft system malfunction. You may also have a shift cable problem also. Try to put car in neutral to see if it cranks? Move shifter back and forth to see if it moves through the gears...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com