Chevrolet Lumina APV Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(115)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(115)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a Chevrolet Lumina APV Intake Manifold Gaskets Replacement is $572 with $124 for parts and $448 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 Chevrolet Lumina APVV6-3.8LService typeIntake Manifold Gaskets ReplacementEstimate$757.66Shop/Dealer Price$834.60 - $1039.48
1996 Chevrolet Lumina APVV6-3.4LService typeIntake Manifold Gaskets ReplacementEstimate$1040.31Shop/Dealer Price$1127.07 - $1366.71
1992 Chevrolet Lumina APVV6-3.1LService typeIntake Manifold Gaskets ReplacementEstimate$1211.63Shop/Dealer Price$1285.93 - $1481.21
1995 Chevrolet Lumina APVV6-3.8LService typeIntake Manifold Gaskets ReplacementEstimate$728.83Shop/Dealer Price$800.19 - $1000.89
1991 Chevrolet Lumina APVV6-3.1LService typeIntake Manifold Gaskets ReplacementEstimate$1211.63Shop/Dealer Price$1295.64 - $1498.21
1992 Chevrolet Lumina APVV6-3.8LService typeIntake Manifold Gaskets ReplacementEstimate$1225.19Shop/Dealer Price$1303.80 - $1509.94
1994 Chevrolet Lumina APVV6-3.1LService typeIntake Manifold Gaskets ReplacementEstimate$1313.83Shop/Dealer Price$1389.53 - $1585.86
1993 Chevrolet Lumina APVV6-3.8LService typeIntake Manifold Gaskets ReplacementEstimate$728.83Shop/Dealer Price$800.19 - $1000.89
Show example Chevrolet Lumina APV Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(115)

Rating Summary
109
3
0
2
1
109
3
0
2
1

Andrew

12 years of experience
962 reviews
Andrew
12 years of experience
Chevrolet Lumina APV V6-3.1L - Starter - Shawnee Mission, Kansas
Called when he running behind. Very professional and stuck with a difficult problem until finished. Would I use him again? A definite yes!

Kevin

7 years of experience
111 reviews
Kevin
7 years of experience
Chevrolet Silverado 1500 V8-5.3L - Intake Manifold Gaskets - Orlando, Florida
Kevin came on time, and was very professional. Very friendly and explains everything he did. We will definitely be using him for our company vehicles in the future.

Ruben

18 years of experience
169 reviews
Ruben
18 years of experience
Chevrolet Camaro V6-3.8L - Intake Manifold Gaskets Replacement - Charlotte, North Carolina

Richard

20 years of experience
97 reviews
Richard
20 years of experience
Chevrolet Cruze L4-1.4L Turbo - Intake Manifold Gaskets - Fayetteville, North Carolina
Richard was professional and took the time to answer questions. I will be calling on him in the future for sure!

Excellent Rating

(115)

Rating Summary
109
3
0
2
1
109
3
0
2
1
Number of Chevrolet Intake Manifold Gaskets Replacement services completed
1265+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Troubleshoot a Power Moon Roof That Won't Open
Car moon roofs won't open if the tracks are clogged or the cables, electric motor, or moon roof switch is broken.
Windshield Laws in Minnesota
As As a driver, you already know you have to follow a variety of traffic laws on the roadways. In addition to those laws, however, you are also required to make sure that the components on your vehicle are in...
P3461 OBD-II Trouble Code: Cylinder 8 Exhaust Valve Control Circuit Malfunction
P3461 P3461 code definition P3461 is the generic OBD-II code for Cyl8 Exhaust Valve Ctrl Circ/Open. Cyl8 specifies that the issue is likely taking place in engine cylinder number 8. Other exhaust valve codes may accompany P3461. What the P3461...

Car stalling and smelling like gas

The air intake houses the mass air flow sensor. This sensor plays a major role in the fuel delivery system. If this component was damaged during the installation in the new air intake hose, this could be the issue. Also...

My car started idleing rough, vibrations soon as start car, vibrations soon as I accelerate, vibrations, rough idle bad

This sound like you may be having an engine misfire. Have the system checked and scanned to see if codes are present for an engine misfire. If it is, then a mechanic can check to see if a coil (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-ignition-coil)...

It will not start I've tried jumping it and that doesn't work. The pat is blinking really fast and I get steering assist fault service required message and also tcs off message. All of the lights on the control panel are on but the [mileage](/topics-mileage-ford/) will display and then go away and leave dashes, I'm going crazy trying to figure this out

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com