Chevrolet K2500 Suburban Water Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(15)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(15)

Water Pump Replacement Service

How much does a Water Pump Replacement cost?

On average, the cost for a Chevrolet K2500 Suburban Water Pump Replacement is $292 with $138 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Chevrolet K2500 SuburbanV8-6.5L Turbo DieselService typeWater Pump ReplacementEstimate$684.60Shop/Dealer Price$778.42 - $1042.06
1993 Chevrolet K2500 SuburbanV8-7.4LService typeWater Pump ReplacementEstimate$479.67Shop/Dealer Price$561.46 - $802.28
1997 Chevrolet K2500 SuburbanV8-5.7LService typeWater Pump ReplacementEstimate$517.33Shop/Dealer Price$598.16 - $834.82
1996 Chevrolet K2500 SuburbanV8-7.4LService typeWater Pump ReplacementEstimate$567.26Shop/Dealer Price$650.19 - $891.87
1996 Chevrolet K2500 SuburbanV8-5.7LService typeWater Pump ReplacementEstimate$517.33Shop/Dealer Price$600.22 - $838.43
1994 Chevrolet K2500 SuburbanV8-6.5L Turbo DieselService typeWater Pump ReplacementEstimate$664.78Shop/Dealer Price$755.07 - $1016.07
1999 Chevrolet K2500 SuburbanV8-5.7LService typeWater Pump ReplacementEstimate$517.33Shop/Dealer Price$598.18 - $834.86
1999 Chevrolet K2500 SuburbanV8-7.4LService typeWater Pump ReplacementEstimate$567.26Shop/Dealer Price$650.19 - $891.87
Show example Chevrolet K2500 Suburban Water Pump Replacement prices

What is a water pump and how does it work?

The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. . The lower temperature coolant then flows back to the water inlet on the engine and the water pump continues the cycle.

When to consider replacing the water pump:

  • Coolant leaks or overheating. The water pump impeller shaft is supported by a bearing. Eventually, the bearing or seal can wear and leak or damage the impeller. Many water pumps have weep holes near the pump bearing. If you see significant leakage from that weep hole, it is time to replace the pump.
  • Bearing roughness or noise. If the water pump shaft does not turn smoothly or the pump is noisy, the bearing is excessively worn. Pump replacement will be necessary.
  • Timing belt replacement. In engines where the water pump is driven by the timing belt, it is a good idea to replace the water pump at the same time the timing belt is replaced. The extensive work explains why it is always recommended to replace the water pump whenever the mechanic already has these components removed for regularly scheduled timing belt replacement.

How do mechanics replace the water pump?

  • The water pump is usually bolted to the front of the engine. The replacement procedure will vary depending on whether the pump is driven by the timing belt, the serpentine belt, or chain.
  • On a cold engine, the engine coolant is drained to a level below the water pump.
  • Components that require removing to access the water pump are removed, including the belt or chain that directly drive the pump.
  • The bolts holding the pump to the engine are removed and the pump is pulled out.
  • The gasket surface must be cleaned and the pump mounting surface inspected. A new gasket, rubber seal, or RTV sealant, as required, is installed and then the new pump. The bolts are torqued in sequence using a calibrated inch pound torque wrench.
  • For applications where the water pump is driven by the timing belt, the timing belt must be removed. Typically, this requires removal of the crankshaft pulley, timing belt covers, and timing belt tensioner. Once the new pump is installed, new coolant is added back while bleeding the cooling system of any air. The engine is then run and brought to normal operating temperature to check for leaks and ensure normal operating temperature.

Is it safe to drive with a water pump problem?

No. Should the water pump only leak a little bit, you can drive the car. However, a small leak could suddenly enlarge or the pump bearing might unexpectedly seize. Either circumstance would likely cause engine overheating. If a defective water pump causes the overheating, it is not safe to drive because of the damage to the engine.

When replacing the water pump keep in mind:

  • It is best to install a new cooling system thermostat when you install a new water pump, especially if the thermostat is old or original.
  • Completely flushing the cooling system is a good idea when you replace the water pump. Flushing can be done before or after pump replacement.
  • The rest of the cooling system should be inspected too — particularly rubber hoses, which have a limited lifetime.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(15)

Rating Summary
14
1
0
0
0
14
1
0
0
0

Greg

23 years of experience
624 reviews
Greg
23 years of experience
Chevrolet K2500 Suburban V8-5.7L - Oil Change - Mesa, Arizona
Greg was extremely professional and informative. He worked swiftly and precisely. He went over future issues and the probable time frames. I will request Greg for future jobs.

Aaron

11 years of experience
72 reviews
Aaron
11 years of experience
Chevrolet K2500 Suburban V8-6.5L Turbo Diesel - Car is not starting - Austin, Texas
Good experience. I was able to learn from him.

Duane

26 years of experience
589 reviews
Duane
26 years of experience
Chevrolet K2500 Suburban V8-6.5L Turbo Diesel - Power Window Switch Replacement (Driver Side Rear) - Vista, California
Our second appointment with Duane; oh how I wish I had known about him and YourMechanic sooner. The hassle of taking my car somewhere was such a pain and, frankly, he's proven to be an extremely experienced and skilled mechanic. Now we're getting ready to have him come out again! Thank you!

Nazareth

28 years of experience
345 reviews
Nazareth
28 years of experience
Chevrolet K2500 Suburban V8-7.4L - Car is not starting - Rosemead, California
Nazareth was on time didnt waste no time went straight to work.I told him what was wrong with my truck and he knew what was wrong with it of course he did his inspection very professional I would recommend him to anyone very nice guy Thank you Nazareth.

Excellent Rating

(15)

Rating Summary
14
1
0
0
0
14
1
0
0
0
Number of Chevrolet K2500 Suburban services completed
165+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

Is it Safe to Drive With a Tire That Has a Slow Leak?
Driving with a slow leak in your tire is potentially dangerous because it can cause a flat tire. Once the...
How to Buy Good Quality Brake Pads
Brake Brake pads sound cushy - however they’re anything but soft and snuggly. These components attach to the brake calipers in order to stop the discs (also known as rotors). The calipers squeeze the pads against the discs, which are...
P2202 OBD-II Trouble Code: Nitrogen Oxide Sensor (NOx) Sensor Circuit Low Input Bank 1
P2202 P2202 code definition Nitrogen Oxide Sensor (NOx) Sensor Circuit Low Input Bank 1 What the P2202 code means P2202 is an OBD-II generic code for the engine control module (ECM) on a diesel engine vehicle with a NOx sensor...

Do i have to buy new engine if water rusty in plugs and car won't start..

It is very common for the cylinder head gasket on these engines to leak oil and coolant. You may have to replace the cylinder head if it is damaged. If you have water mixed in the engine oil, then you...

Mechanic said I need a new throttle body because my car won't go into to drive or reverse

If you car does not go into drive or reverse, your mechanic is most likely talking about replacing the valve body inside the transmission. This is part of the transmission that directs transmission fluid to build hydraulic pressure, which is...

Hello, I recently replaced my map sensor, and everything was fine for a while, but my check engine light just turned back on and I’m reading a code that says my map sensor is still messed up. Could this be a problem with the wiring?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com