Chevrolet G10 Hazard / Turn Signal Flasher Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Hazard / Turn Signal Flasher Replacement Service

How much does a Hazard / Turn Signal Flasher Replacement cost?

On average, the cost for a Chevrolet G10 Hazard / Turn Signal Flasher Replacement is $107 with $12 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1989 Chevrolet G10V8-5.0LService typeHazard / Turn Signal Flasher ReplacementEstimate$139.11Shop/Dealer Price$155.14 - $180.73
1977 Chevrolet G10L6-4.1LService typeHazard / Turn Signal Flasher ReplacementEstimate$363.71Shop/Dealer Price$440.91 - $649.96
1980 Chevrolet G10L6-4.1LService typeHazard / Turn Signal Flasher ReplacementEstimate$363.71Shop/Dealer Price$440.91 - $649.96
1976 Chevrolet G10V8-6.6LService typeHazard / Turn Signal Flasher ReplacementEstimate$301.63Shop/Dealer Price$363.29 - $525.76
1989 Chevrolet G10V6-4.3LService typeHazard / Turn Signal Flasher ReplacementEstimate$119.11Shop/Dealer Price$135.17 - $160.79
1991 Chevrolet G10V6-4.3LService typeHazard / Turn Signal Flasher ReplacementEstimate$152.13Shop/Dealer Price$176.43 - $226.80
1987 Chevrolet G10V8-5.7LService typeHazard / Turn Signal Flasher ReplacementEstimate$157.13Shop/Dealer Price$181.30 - $231.56
1980 Chevrolet G10V8-5.0LService typeHazard / Turn Signal Flasher ReplacementEstimate$368.71Shop/Dealer Price$446.14 - $655.38
Show example Chevrolet G10 Hazard / Turn Signal Flasher Replacement prices

What is the Hazard / Turn Signal Flasher all about?

The hazard / turn signal flasher is a small, electrical device that causes the lights on your vehicle to flash in a rhythmic, steady fashion. It is usually located under the driver’s side of the dash, and is wired in-line with the turn signal lever and hazard switch buttons. When the turn signals or hazard lights are turned on, the circuit’s power is routed through the flasher, which only emits short bursts of power that cause the lights to flash. If the flasher is not working, your hazard or turn signal lights may stay on solid when turned on, not turn on at all, or flash at an undesirable rate.

Keep in mind:

  • Flasher units hardly ever develop problems. Although in older vehicles, the wiring can become compromised.
  • Don’t assume that the problem is with the flasher – it could be something as simple as a blown fuse.
  • Check your bulbs, and replace them if necessary.

How it's done:

  • The vehicle's hood is opened and supported manually
  • The new relays are installed onto a mounting bracket
  • The wiring is connected to the relays and into the vehicle harness
  • The hood manual support is removed
  • The install is verified and the hazard lights are tested for proper operation

Our recommendation:

If your turn signals aren’t working, you will fail a motor vehicle inspection or a roadside check. Examine your fuses to make sure none are discolored – this indicates a blown fuse that could be causing the problem. Check your light bulbs as well. If all are in good working order, then the problem could be the hazard / turn signal flasher, which is part of your car's electrical system. Have one of our expert mechanics inspect and replace the hazard turn signal flasher if required.

What common symptoms indicate you may need to replace the Hazard / Turn Signal Flasher?

  • No turn signals on either side
  • Turn signal on only one side
  • Turn signals light up but don’t flash
  • Turn signal flashes too slow
  • Turn signal flashes too fast
  • Hazard lights don’t work

How important is this service?

Malfunctioning turn signals and hazard lights are critical safety issues. If your turn signals aren’t working, you have no way of communicating your driving intentions to other drivers aside from hand signals. Have one of our expert mechanics check them immediately so that the problem can be diagnosed, and appropriate measures taken, such as replacing your hazard / turn signal flasher.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0

Harish

27 years of experience
588 reviews
Harish
27 years of experience
Chevrolet G10 V8-5.0L - Alternator - Charlotte, North Carolina
Install went well.

Luis

18 years of experience
329 reviews
Luis
18 years of experience
Chevrolet G10 L6-4.1L - Starter - Elizabeth, New Jersey
Prompt, honest and friendly. Couldnt ask for more in a mechanic

Ivan

12 years of experience
28 reviews
Ivan
12 years of experience
Chevrolet Monte Carlo V6-3.4L - Hazard / Turn Signal Flasher - Las Vegas, Nevada
Ivan came on time did the job to fix my repair , checked my car to make sure it was ok , this was the first time using this service its nice and convenient , Thank you ~

Johnathon

9 years of experience
164 reviews
Johnathon
9 years of experience
Chevrolet Malibu V6-3.1L - Hazard / Turn Signal Flasher - Fresno, California
Excellent, thank you!

Excellent Rating

(6)

Rating Summary
6
0
0
0
0
6
0
0
0
0
Number of Chevrolet Hazard / Turn Signal Flasher Replacement services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

P0057 OBD-II Trouble Code: HO2S Heater Control Circuit Low (Bank 2 Sensor 2)
P0057 P0057 trouble code definition P0057 is a code that sets when the powertrain control module senses that the voltage is low on the bank 2 sensor 2 oxygen sensor. What the P0057 code means When a P0057 trouble code...
P0271 OBD-II Trouble Code: Cylinder 4 Injector Circuit High
P0271 P0271 code definition Cylinder 4 Injector Circuit High What the P0271 code means This diagnostic trouble code (DTC) (https://www.yourmechanic.com/article/what-is-the-on-board-diagnostics-obd-system) indicates that a reference voltage from the fuel injector associated with cylinder number 4 has gone higher than the range...
P3412 OBD-II Trouble Code: Cylinder 2 Deactivation/Intake Valve Control Circuit High
P3412 means the cylinder valve control circulation is reading high due to electrical problems, bad sensor or solenoid, or low oil pressure.

Clicking sound when turning off heater

Hi there. The problem you describe is your temperature blend door motor. The motor is not able to reach the requested position, this may be due to the temperature blend door being in a bind or the motor itself being...

Hello- My 1989 automatic, full-size K5 Blazer, was towed about 6 blocks, when the mechanic tried to drive it into a service bay, i

Hello. We will be happy to help you out. There are only a few things which can cause your transmission to not select gear. They can be bad shifter bushings, shift linkage broken or disconnected, or an internal transmission issue....

can the oil in my coolent reservoir be caused by a bad coil

"Gunk" can simply mean that the coolant is old and in need of a cooling system flush (https://www.yourmechanic.com/services/cooling-system-flush).If it actually oil in the coolant reservoir, then odds are the head gasket may have failed. The head gasket keeps oil and...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com