Chevrolet Express 3500 Clunking or knocking noise from wheels Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(123)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(123)

Clunking or knocking noise from wheels Inspection Service

How much does a Clunking or knocking noise from wheels Inspection cost?

On average, the cost for a Chevrolet Express 3500 Clunking or knocking noise from wheels Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Chevrolet Express 3500V8-4.8LService typeClunking or knocking noise from wheels InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1997 Chevrolet Express 3500V8-7.4LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2018 Chevrolet Express 3500V8-6.0LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2000 Chevrolet Express 3500V8-7.4LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2001 Chevrolet Express 3500V8-8.1LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2004 Chevrolet Express 3500V8-4.8LService typeClunking or knocking noise from wheels InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2015 Chevrolet Express 3500V8-6.6L Turbo DieselService typeClunking or knocking noise from wheels InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2010 Chevrolet Express 3500V8-6.0LService typeClunking or knocking noise from wheels InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Chevrolet Express 3500 Clunking or knocking noise from wheels Inspection prices

Clunking or knocking noises can be very disconcerting for any driver to hear while they are going down the road. While these noises may be a symptom of some different issues, all are usually related to a suspension component that has failed. When a suspension component has failed, the ride or the vehicle may be altered. If the failed component is not dealt with, it can lead to increasingly difficult and dangerous problems.

How this system works:

Your vehicle’s suspension system is designed to minimize friction between the tires and the road, ensuring a comfortable ride for you and your passengers. Many of the components that may cause a clunking or knocking noise are not only a part of the suspension, but help control the steering of the vehicle. Any issues regarding the steering or suspension of the vehicle should be looked at by a mechanic as they will only become worse over time.

Common reasons for this to happen:

  • Bad Ball Joints: Ball joints connect the vehicle’s wheel hubs to the rest of the suspension components. Depending on the vehicle, one or two ball joints per wheel and may or may not be load bearing. If a ball joint is beginning to fail, you may notice a clunking noise coming from the front wheels. This clunking noise will become louder and more frequent over time. You may also notice that your steering has been affected by the bad ball joint, potentially causing vibration in the steering wheel.

  • Bad Sway Bar Link: A vehicle’s sway bar or anti-roll bar, helps reduce body roll while cornering. Sway bars can help keep a vehicle from rolling over when going around a sharp corner. If the sway bar breaks or is damaged it may produce a clunking or knocking sound, especially when going over bumps. Your vehicle may also had more difficulty handling when the sway bar is damaged.

  • Bad Tie Rods: Tie rods connect a vehicle’s steering rack to the steering arm. This helps translate the turning of the steering wheel to the direction of the tires. When a tie rod end is worn or loose, they may produce a clunking noise. Worn tie rod ends may also cause more play in the steering wheel, making turning more vague.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason for the clunking or knocking noise from the wheels. The mechanic will then provide a detailed inspection report outlining the reason for the noise and the cost of any repairs that need to be made.

How it's done:

Telling a mechanic about any unusual sensations, in addition to the clunking or knocking noise, you may have observed, will help him or her understand what went wrong with the vehicle.

The mechanic will begin by lifting the front of the vehicle off the ground and shaking the front tires to check for play. If there is play in the front tires, the mechanic will suspect bad ball joints. The mechanic will then remove the wheel and the control arm(s) in order to access the faulty ball joint. He or she will then remove the old ball joint and replace it with a new one. The mechanic should also ensure that the new ball joint is properly lubricated in order to ensure longer life.

If the mechanic suspects that the sway bar has gone bad, the mechanic will begin by examining the sway bar bushings. If the entire sway bar appears to be in tact the bushing may cause the clunking noise. The mechanic will then replace the bushings and the sway bar if necessary.

If the mechanic suspects the tie rods, he or she will examine the tie rods for damage. If the tie rod end had become worn or loose, the mechanic will remove it and replace it with a new one. The mechanic will also ensure after installation, that the new tie rod end is properly lubricated.

In all repairs, the mechanic will make sure after completing the necessary repairs that the car handles properly. He or she should ask to test drive the vehicle to ensure this.

How important is this service?

Suspension and steering components that have gone bad will only get worse over time. If you notice that your car is not handling well or that it has started producing a clunking or knocking noise, you should have it inspected by a mechanic. Issues with suspension and steering components could also lead to other issues, like prematurely worn tires. Being vigilant about repairs to these components can help ensure long-life for your vehicle.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(123)

Rating Summary
113
4
1
3
2
113
4
1
3
2

Chris

20 years of experience
448 reviews
Chris
20 years of experience
Chevrolet Express 3500 V8-5.7L - Power steering fluid is leaking - Portland, Oregon
Chris is Great

Robert

27 years of experience
43 reviews
Robert
27 years of experience
Chevrolet Express 3500 V8-6.0L - Car is not starting - Acworth, Georgia
Robert, a Rare, True, professional expert.

Todd

13 years of experience
47 reviews
Todd
13 years of experience
Chevrolet Express 3500 V8-5.7L - Car is not starting - Portland, Oregon
Knowledgeable and task oriented. Hard to find these days.

Casey

16 years of experience
44 reviews
Casey
16 years of experience
Chevrolet Express 3500 V8-6.0L - Radiator Hose Repair - Spring, Texas
Casey B. was very careful and took his time replacing both upper /lower radiator hoses.He made sure no air pockets remained in anti-freeze.He made sure to leave work site clean and vehicle in tidy shape.I will definitely recommend Casey B. and use Your Mechanic in the near future.Prices were lower than three other estimates.Steve S.

Excellent Rating

(123)

Rating Summary
113
4
1
3
2
113
4
1
3
2
Number of Chevrolet Express 3500 services completed
1353+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

P3415 OBD-II Trouble Code: Cylinder 2 Exhaust Valve Control Malfunction
P3415 P3415 code definition P3415 is the fault code for Cyl2 Exhaust Valve Ctrl Circ Low. Cyl2 specifies that the issue is likely taking place in engine cylinder number 2. What the P3415 code means This code indicates there is...
How to Transfer a Car Title in All States
Transferring a car title is necessary when a car is changing owners. Find out how to do so according to your state.
The Difference Between Shocks and Struts
Shocks and struts are often referred to interchangeably as they perform the same function, however, they differ in suspension system design.

Car not going into park.

Hi there. The shift linkage would need to be inspected for bad end bushings that might have falling apart. The bushings hold the transmission linkage and the shifter linkage together. When the bushings go bad, it will make selecting park...

Steering wheel vibration over 60 mph

Hello. This vehicle should not shake like this when driving at high speeds. If it only occurs at higher rates of speed then it either has a warped front hub assembly or it may have a problem with the alignment....

My engine is knocking

When your car begins to knock due to a lack of oil, this could mean many different things, such as broken or bent valves, a bad camshaft, rod or main bearings (https://www.yourmechanic.com/services/center-support-bearing-replacement), and many other different things. As you may...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com