Chevrolet City Express Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(1,010)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(1,010)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Chevrolet City Express Brake Pad Replacement is $216 with $76 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Chevrolet City ExpressL4-2.0LService typeBrake Pads - Rear ReplacementEstimate$453.00Shop/Dealer Price$502.98 - $638.34
2015 Chevrolet City ExpressL4-2.0LService typeBrake Pads - Rear ReplacementEstimate$436.78Shop/Dealer Price$483.58 - $616.56
2015 Chevrolet City ExpressL4-2.0LService typeBrake Pads - Front ReplacementEstimate$307.11Shop/Dealer Price$349.25 - $471.48
2018 Chevrolet City ExpressL4-2.0LService typeBrake Pads - Rear ReplacementEstimate$500.00Shop/Dealer Price$562.65 - $743.07
2017 Chevrolet City ExpressL4-2.0LService typeBrake Pads - Front ReplacementEstimate$527.63Shop/Dealer Price$626.37 - $915.10
2017 Chevrolet City ExpressL4-2.0LService typeBrake Pads - Rear ReplacementEstimate$500.00Shop/Dealer Price$562.90 - $743.52
2018 Chevrolet City ExpressL4-2.0LService typeBrake Pads - Front ReplacementEstimate$298.85Shop/Dealer Price$338.94 - $454.99
2016 Chevrolet City ExpressL4-2.0LService typeBrake Pads - Front ReplacementEstimate$307.11Shop/Dealer Price$349.25 - $471.48
Show example Chevrolet City Express Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(1,010)

Rating Summary
956
34
5
4
11
956
34
5
4
11

Nicholas

12 years of experience
691 reviews
Nicholas
12 years of experience
Chevrolet City Express L4-2.0L - Car is not starting - Durham, North Carolina
Very honest and upfront.

Rashad

19 years of experience
56 reviews
Rashad
19 years of experience
Chevrolet City Express L4-2.0L - Car is not starting - Fairburn, Georgia
Great mechanic

Brian

24 years of experience
818 reviews
Brian
24 years of experience
Chevrolet Silverado 1500 V8-5.3L - Brake Pads Replacement (Front, Rear) - Jacksonville, Florida
This is the second time I have had Brian work on my 2014 Silverado. Brian was extremely professional, honest, courteous and helpful. I'd recommend him to anyone.

Daniel

12 years of experience
90 reviews
Daniel
12 years of experience
Chevrolet Tahoe V8-5.3L - Brake Pads Replacement (Front, Rear) - Las Vegas, Nevada
Great guy, awesome and professional. I would definitely recommend.

Excellent Rating

(1,010)

Rating Summary
956
34
5
4
11
956
34
5
4
11
Number of Chevrolet Brake Pad Replacement services completed
11110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Replace a Radiator Drain Cock
The radiator drain plug goes bad when the oil pressure is lower than normal, there is leaking coolant, or the Check Engine Light is on.
The Guide To Colored Curb Zones in Georgia
Georgia Georgia parking laws: understanding the basics Drivers in the state of Georgia need to be aware of the various parking laws and regulations to ensure they do not inadvertently park in the wrong location. If you park where you...
When is the Best Time of Year to Buy a Vehicle?
Timing your purchase can help you save money when buying a new car. The best time of year to buy a car is usually towards the end of the year.

The car I want to buy has a blown head gasket and doesn't want to start.

I would be hesitant on buying a car with a blown head gasket. There may be more damage internally in the engine because it has allowed water to get in the oil system and can wear out bearings and may...

1999 Jeep Wrangler overheating at highway speeds

Hello. If this only occurs at highway speeds, then you may have pressure build up in the cooling system. This is typically caused by a leaking head gasket. If there is a slight leak, then combustion pressure will build up...

Can you tell me how to remove the charcoal canister in a 02 hyundai sonata 2.4l it needs the foam replaced

To remove the canister, perform the following: Remove the two bolts that hold the canister onto the car and drop it down. Then remove the bolts that secure the canister to the shield cover. Disconnect the wiring harness to the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com