Chevrolet Cavalier Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(391)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(391)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Chevrolet Cavalier Power Steering Pressure Hose Replacement is $219 with $79 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Chevrolet CavalierL4-2.4LService typePower Steering Pressure Hose ReplacementEstimate$395.70Shop/Dealer Price$448.93 - $598.09
1992 Chevrolet CavalierV6-3.1LService typePower Steering Pressure Hose ReplacementEstimate$389.03Shop/Dealer Price$434.29 - $563.88
2004 Chevrolet CavalierL4-2.2LService typePower Steering Pressure Hose ReplacementEstimate$427.78Shop/Dealer Price$479.31 - $627.19
1998 Chevrolet CavalierL4-2.2LService typePower Steering Pressure Hose ReplacementEstimate$330.11Shop/Dealer Price$378.00 - $517.48
1998 Chevrolet CavalierL4-2.4LService typePower Steering Pressure Hose ReplacementEstimate$376.17Shop/Dealer Price$427.09 - $570.13
1999 Chevrolet CavalierL4-2.4LService typePower Steering Pressure Hose ReplacementEstimate$347.69Shop/Dealer Price$389.76 - $510.13
1999 Chevrolet CavalierL4-2.2LService typePower Steering Pressure Hose ReplacementEstimate$310.49Shop/Dealer Price$353.49 - $478.27
1997 Chevrolet CavalierL4-2.2LService typePower Steering Pressure Hose ReplacementEstimate$330.11Shop/Dealer Price$378.00 - $517.48
Show example Chevrolet Cavalier Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(391)

Rating Summary
368
8
6
2
7
368
8
6
2
7

Raymond

21 years of experience
5 reviews
Raymond
21 years of experience
Chevrolet Cavalier L4-2.2L - Car is overheating - Addison, Texas
Extremely knowledgable and friendly. Great mechanic. I will definitely recommend him.

Joe

44 years of experience
838 reviews
Joe
44 years of experience
Chevrolet Cavalier L4-2.2L - AC is not working - Clearwater, Florida
Extremely polite and conversational, appointment only took 30 minutes.

Jonathan

14 years of experience
171 reviews
Jonathan
14 years of experience
Chevrolet Cavalier L4-2.2L - Shift Selector Cable - Barrington, Rhode Island
NA

Steve

16 years of experience
187 reviews
Steve
16 years of experience
Chevrolet Cavalier L4-2.2L - Check Engine Light is on - Bronx, New York
Really professional & knowledgeable!

Excellent Rating

(391)

Rating Summary
368
8
6
2
7
368
8
6
2
7
Number of Chevrolet Cavalier services completed
4301+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

B2107 OBD-II Trouble Code: Front Wiper Motor Relay Circuit Short to Vbatt
B2107 trouble code means there's a circuit error in the front wiper motor relay, caused by a damaged relay, or damaged electrical components.
How to Replace a Door Mirror
The side view mirror needs a replacement if it is hanging off its housing or if the electronics are malfunctioning within the mirror.
How to Buy a Good Quality Gasket
There There are a wide variety of gasket types on a typical vehicle, from head gaskets which are installed between the cylinder head and the engine block to engine gaskets which seal out harmful elements and keep the engine safe...

Doorlock and door opener broken

It sounds like the door latch needs to be removed and replaced. The door latch and locking mechanism are built into the same part and can easily be replaced. I would recommend having a technician from YourMechanic come out and...

I tried to recharge my AC and whenever I put the gage in it says 0 I start to recharge it and gage fluctuates and car makes noise

Hi there. It is more than likely that you have either an AC refrigerant leak or that the compressor is damaged. The leak can be caused by damaged low or high pressure hoses, connections or other components that might be...

2006 Dodge Ram 1500 starter relay not getting power

In the starter circuit on your model, in addition to the "relay", there is a starter relay control in the PCM, and a totally integrated power module that has the neutral safety switch and the starter motor controller and of...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com