Chevrolet Cavalier Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(391)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(391)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a Chevrolet Cavalier Intake Manifold Gaskets Replacement is $254 with $72 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Chevrolet CavalierL4-2.2LService typeIntake Manifold Gaskets ReplacementEstimate$681.80Shop/Dealer Price$746.80 - $917.50
2000 Chevrolet CavalierL4-2.4LService typeIntake Manifold Gaskets ReplacementEstimate$478.75Shop/Dealer Price$549.90 - $757.60
1992 Chevrolet CavalierL4-2.2LService typeIntake Manifold Gaskets ReplacementEstimate$669.37Shop/Dealer Price$729.33 - $896.26
1999 Chevrolet CavalierL4-2.4LService typeIntake Manifold Gaskets ReplacementEstimate$478.75Shop/Dealer Price$549.94 - $757.66
2001 Chevrolet CavalierL4-2.4LService typeIntake Manifold Gaskets ReplacementEstimate$478.75Shop/Dealer Price$552.00 - $761.27
1996 Chevrolet CavalierL4-2.4LService typeIntake Manifold Gaskets ReplacementEstimate$478.75Shop/Dealer Price$550.13 - $758.00
1998 Chevrolet CavalierL4-2.2LService typeIntake Manifold Gaskets ReplacementEstimate$638.73Shop/Dealer Price$694.54 - $849.33
1990 Chevrolet CavalierV6-3.1LService typeIntake Manifold Gaskets ReplacementEstimate$1046.52Shop/Dealer Price$1103.78 - $1250.88
Show example Chevrolet Cavalier Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(391)

Rating Summary
368
8
6
2
7
368
8
6
2
7

Terry

27 years of experience
326 reviews
Terry
27 years of experience
Chevrolet Cavalier L4-2.2L - Fuel Pump - Chandler, Arizona
Terry was on time, professional, and he got the job done in a timely manner. I'm glad to have had him as my mechanic.

Brian

24 years of experience
818 reviews
Brian
24 years of experience
Chevrolet Cavalier L4-2.2L - Cooling/Radiator Fan Motor - Orange Park, Florida
Brian is the best!! Couldn't be happier with his work on my car!

Luis

18 years of experience
62 reviews
Luis
18 years of experience
Chevrolet Cavalier L4-2.2L - Check Engine Light is on - Kissimmee, Florida
Very knowledgeable and friendly,he did a great job.

MARK

30 years of experience
18 reviews
MARK
30 years of experience
Chevrolet Cavalier L4-2.2L - Fuel Pump - Sacramento, California
I have to say, Mark was awesome. The company needs to make sure that the right parts are ordered, so the mechanics don’t have to drive all over town to get the right part. Mark was very patient but I could see he was just as frustrated as I was, when it comes to ordering car parts. I feel sorry for the mechanics when this happens. It is some times hard for certain customers to understand that things like this do occur from time to time. I enjoy watching him install new parts on my car, and I even got to help a little. I love that, anything new I can learn about my car really helps in knowing when there is a problem. Mark will definitely be the mechanic to work on my car in the future. Happy customer Erin

Excellent Rating

(391)

Rating Summary
368
8
6
2
7
368
8
6
2
7
Number of Chevrolet Cavalier services completed
4301+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

How Much Does a Mechanic Make in West Virginia?
Automotive technician jobs in West Virginia have an average mechanic salary of $32k, with some mechanics earning a salary of more than $50k.
How to Become a Race Car Driver
It It goes without saying that race cars are a lot of fun. Anyone who enjoys cars and driving is bound to love race cars; they accelerate and brake faster than normal cars, handle far better, and are driven on...
How Long Does a Track Bar Last?
The The track bar is part of your car's suspension system and is located underneath your vehicle. The bar is attached to a suspension link that provides a lateral location for the axle. The suspension allows the wheels to move...

Clutch issues

I have seen some flywheels that after the resurface is done and the clutch and pressure plate is installed the bolts will bottom out and not fully seat the pressure plate. This will cause the clutch to not disengage all...

Temperature goes higher when driving and I pressure test the vehicle but I couldn’t see any leaks. The pressure Tester gauge doesn’t go down

I was just driving home and my Nissan Murano just cut off as I was driving it started back up after about 5 minutes I made it home safely then I saw smoke coming from under the hood as I was driving home

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com