Chevrolet Captiva Sport Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(98)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(98)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Chevrolet Captiva Sport Power Steering Pressure Hose Replacement is $233 with $93 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2012 Chevrolet Captiva SportL4-2.4LService typePower Steering Pressure Hose ReplacementEstimate$378.90Shop/Dealer Price$438.48 - $609.10
2013 Chevrolet Captiva SportL4-2.4LService typePower Steering Pressure Hose ReplacementEstimate$369.89Shop/Dealer Price$427.70 - $597.00
2012 Chevrolet Captiva SportV6-3.0LService typePower Steering Pressure Hose ReplacementEstimate$331.21Shop/Dealer Price$379.37 - $519.68
2015 Chevrolet Captiva SportL4-2.4LService typePower Steering Pressure Hose ReplacementEstimate$331.21Shop/Dealer Price$379.37 - $519.68
2014 Chevrolet Captiva SportL4-2.4LService typePower Steering Pressure Hose ReplacementEstimate$369.89Shop/Dealer Price$429.20 - $599.62
Show example Chevrolet Captiva Sport Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(98)

Rating Summary
95
1
1
0
1
95
1
1
0
1

Jose

9 years of experience
22 reviews
Jose
9 years of experience
Chevrolet Captiva Sport L4-2.4L - Drive Belt Tensioner - Humble, Texas
Very professional

Rigoberto

12 years of experience
739 reviews
Rigoberto
12 years of experience
Chevrolet Captiva Sport L4-2.4L - Check Engine Light is on - Bellwood, Illinois
Another awesome experience as well as informative. The advice given in regards to the continued upkeep of my vehicle is phenomenal. He throughly checks everything and tells why this is happening and what needs to had happened. Thank you.

Miguel

18 years of experience
44 reviews
Miguel
18 years of experience
Chevrolet Captiva Sport L4-2.4L - Steering Rack/Gearbox - Oakland, California
Very professional

William

35 years of experience
731 reviews
William
35 years of experience
Chevrolet Captiva Sport L4-2.4L - Alternator Repair - Phoenix, Arizona
He arrived on time. Was very polite explain what he was going to do.

Excellent Rating

(98)

Rating Summary
95
1
1
0
1
95
1
1
0
1
Number of Chevrolet Captiva Sport services completed
1078+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Drain Your Fuel Tank
The The majority of cars on the road today use internal combustion engines that use gasoline or diesel as fuel, and they store this fuel in a gas tank. Most gas tanks are located on the undersides of the vehicle...
Symptoms of a Bad or Failing Power Steering Pump Pulley
Common signs include a burning smell from the engine or choppy steering that may completely fail.
P004A OBD-II Trouble Code: Turbocharger/Supercharger Boost Control “A” Circuit/Open
P004A means there is an issue with the turbocharger or supercharger boost control in the “A” circuit due to malfunctioning boost sensor or intercooler

Car using a lot of oil - 2013 Volkswagen Touareg

Some manufacturers absolutely design their vehicles to consume oil (https://www.yourmechanic.com/article/What-Does-It-Mean-When-My-Car-Is-Burning-Oil_3) as a normal engine function. Volkswagen has a tendency to do this. If not by design, there are several things to take a look at. Bad gaskets will allow the...

Jessica Howe

Hi...yes, that is absolutely possible. If you would please review the slate of services (including all the various diagnostic services) available at this link (https://www.yourmechanic.com/services), simply choose the service that best matches the difficulty you are having. Don't worry if...

Traction control keeps popping up, Then [Engine](/topics-engine-chevy/) power reduced

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com