Chevrolet Beretta Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(298)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(298)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Chevrolet Beretta Car Thermostat Replacement is $208 with $68 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Chevrolet BerettaL4-2.2LService typeCar Thermostat ReplacementEstimate$333.74Shop/Dealer Price$382.03 - $518.78
1994 Chevrolet BerettaV6-3.1LService typeCar Thermostat ReplacementEstimate$319.85Shop/Dealer Price$365.15 - $496.92
1996 Chevrolet BerettaL4-2.2LService typeCar Thermostat ReplacementEstimate$313.51Shop/Dealer Price$357.25 - $484.28
1996 Chevrolet BerettaV6-3.1LService typeCar Thermostat ReplacementEstimate$320.75Shop/Dealer Price$366.30 - $498.76
1993 Chevrolet BerettaL4-2.3LService typeCar Thermostat ReplacementEstimate$311.77Shop/Dealer Price$356.55 - $483.38
1991 Chevrolet BerettaL4-2.3LService typeCar Thermostat ReplacementEstimate$311.77Shop/Dealer Price$355.21 - $481.05
1992 Chevrolet BerettaL4-2.3LService typeCar Thermostat ReplacementEstimate$311.77Shop/Dealer Price$355.09 - $480.83
1990 Chevrolet BerettaL4-2.3LService typeCar Thermostat ReplacementEstimate$311.77Shop/Dealer Price$355.07 - $480.80
Show example Chevrolet Beretta Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(298)

Rating Summary
284
5
2
1
6
284
5
2
1
6

Ben

42 years of experience
1589 reviews
Ben
42 years of experience
Chevrolet Blazer V6-4.3L - Thermostat - Cypress, Texas
Ben was very knowledgeable and friendly.

Thomas

14 years of experience
80 reviews
Thomas
14 years of experience
Chevrolet Camaro V6-3.6L - Thermostat - Orlando, Florida
Great, knowledgeable and fast. Excellent service.

Michael

28 years of experience
672 reviews
Michael
28 years of experience
Chevrolet Sonic L4-1.8L - Thermostat - San Tan Valley, Arizona
I wouldn't want anyone else to work on my car. Michael is very knowledgeable and trustworthy. Thank you, Michael!

Deward

18 years of experience
156 reviews
Deward
18 years of experience
Chevrolet Silverado 1500 V8-4.8L - Thermostat - Pleasant Garden, North Carolina
he is a very good mechanic

Excellent Rating

(298)

Rating Summary
284
5
2
1
6
284
5
2
1
6
Number of Chevrolet Car Thermostat Replacement services completed
3278+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

How to Buy a Personalized License Plate in Ohio
Personalized Personalized license plates (https://www.yourmechanic.com/article/how-to-find-out-which-license-plates-are-available-in-your-state-by-brady-klopfer) are a very popular way to add customization to a vehicle. With a personalized plate, you can share a sentiment or message with the world. For many people, personalized plates are like larger, better looking...
P0261 OBD-II Trouble Code: Cylinder 1 Injector Circuit Low
P0261 P0261 code definition Cylinder 1 Injector Circuit Low What the P0261 code means This trouble code indicates that the powertrain control module (https://www.yourmechanic.com/article/what-is-a-vehicle-s-electrical-control-unit) has detected a lower reference voltage coming from the number 1 cylinder’s fuel injector than what...
The Top Seasonal Car Repairs
Cars Cars are complex machines. The performance of your car can be affected by many factors, from the age of the car and its various parts, to how it is driven. Because of all the factors affecting your car and...

Difficulty shifting into third gear

Hello. There could be a problem with the shifter cable or the shifter linkage from the transmission to the shifter. There also could be a problem with the slave cylinder (https://www.yourmechanic.com/services/clutch-slave-cylinder-replacement), causing it to be hard to shift at times....

i smell gas under the gas tank in my car

Hi, and thanks for contacting YourMechanic. You may want to inspect the lines around your gas tank. They may be leaking or corroded causing the gas smell in your car. We do not recommend that you drive your vehicle if...

Charging system warning light.

You may have a failing voltage regulator that could be allowing the alternator to supply too much or too little amperage to the battery resulting in the battery never maintaining a consistent charge as it is designed to. The voltage...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com