Chevrolet Avalanche 2500 Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Chevrolet Avalanche 2500 Control Arm Assembly Replacement is $260 with $120 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Chevrolet Avalanche 2500V8-8.1LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$565.16Shop/Dealer Price$671.30 - $981.62
2002 Chevrolet Avalanche 2500V8-8.1LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$559.61Shop/Dealer Price$664.85 - $976.44
2004 Chevrolet Avalanche 2500V8-8.1LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$575.06Shop/Dealer Price$639.15 - $821.82
2004 Chevrolet Avalanche 2500V8-8.1LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$559.61Shop/Dealer Price$664.87 - $976.48
2002 Chevrolet Avalanche 2500V8-8.1LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$1016.41Shop/Dealer Price$1237.35 - $1892.66
2004 Chevrolet Avalanche 2500V8-8.1LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$556.15Shop/Dealer Price$660.69 - $969.81
2003 Chevrolet Avalanche 2500V8-8.1LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$1016.41Shop/Dealer Price$1235.89 - $1890.11
2003 Chevrolet Avalanche 2500V8-8.1LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$575.06Shop/Dealer Price$639.15 - $821.81
Show example Chevrolet Avalanche 2500 Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(5)

Rating Summary
4
1
0
0
0
4
1
0
0
0

Faraz

23 years of experience
142 reviews
Faraz
23 years of experience
Chevrolet Avalanche 2500 V8-8.1L - Transfer case fluid is low - Pleasanton, California
Great experience!

Peter

44 years of experience
1397 reviews
Peter
44 years of experience
Chevrolet Avalanche 2500 V8-8.1L - Battery - Tempe, Arizona
Peter was on time and promtply dealt with the battery replacemnet and did a fair assesment of the vehicle. The vehicle started prompltly and he found it to be in fine working order.

Vladimir

11 years of experience
214 reviews
Vladimir
11 years of experience
Chevrolet Avalanche 2500 V8-8.1L - camshaft position sensor pigtail - Elk Grove, California
Vladimir is very knowledgeable with electrical systems and has been a great mechanic for my vehicle. He often goes above and beyond to help diagnose or fix any issues. Such a pleasure working with someone that knows what he's talking about and can help explain the issues or give advice on how to resolve your issues. His availability is top notch and he even makes the trek to where you are to help. Can't say enough about his workmanship and professionalism.

Dameron

18 years of experience
273 reviews
Dameron
18 years of experience
Chevrolet Avalanche 2500 V8-8.1L - Power Steering Pump - Indianapolis, Indiana
Excellent Customer Service

Excellent Rating

(5)

Rating Summary
4
1
0
0
0
4
1
0
0
0
Number of Chevrolet Avalanche 2500 services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1700+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Dodge Grand Caravan
When When you were a kid, almost every family you knew had a Dodge Grand Caravan. However, thanks to the rise of SUVs, CUVs (crossover utility vehicles), and sport wagons, this model has lost a lot of ground over the...
P0902 OBD-II Trouble Code: Clutch Actuator Circuit Low
What What the P0902 code means The P0902 is a generic OBD-II powertrain code, which means it applies to all makes and models of vehicles from 1996 to the present. What causes the P0902 code? There may be one or...
How to Replace Car Carpeting
Your Your car’s carpet is underneath the seats, the console, and trim; it is a permanent fixture in your car. There are circumstances that can occur when you want to remove it and replace it, such as when the carpeting...

Why is the oil in my car disappearing?

Hello, your car is using the oil internally. This can be done by engine wear with the piston rings in the cylinders. The rings seal air and fuel in the cylinder, when they wear the sealing ability is reduced....

spark plug arcing at boot

Spark wires and boots do age, get damaged and otherwise fail. An accompanying symptom can be the arcing your describe, or voltage leakages, which simply means that the energy that was supposed to go toward firing the plug gets diverted....

replacement of catalytic converter

I wouldn't assume that the rear converter is bad unless the mechanic actually performed a diagnostic on the converter AND then explained to you what was done, what was found and WHY the solution is to replace the converter. If...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com