Chevrolet Avalanche 1500 Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(3)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(3)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Chevrolet Avalanche 1500 Car Thermostat Replacement is $170 with $75 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Chevrolet Avalanche 1500V8-5.3LService typeCar Thermostat ReplacementEstimate$264.91Shop/Dealer Price$312.39 - $432.33
2006 Chevrolet Avalanche 1500V8-5.3LService typeCar Thermostat ReplacementEstimate$248.93Shop/Dealer Price$297.43 - $420.40
2005 Chevrolet Avalanche 1500V8-5.3LService typeCar Thermostat ReplacementEstimate$248.93Shop/Dealer Price$297.43 - $420.40
2002 Chevrolet Avalanche 1500V8-5.3LService typeCar Thermostat ReplacementEstimate$244.91Shop/Dealer Price$292.39 - $412.32
2004 Chevrolet Avalanche 1500V8-5.3LService typeCar Thermostat ReplacementEstimate$248.93Shop/Dealer Price$297.45 - $420.43
Show example Chevrolet Avalanche 1500 Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Chevrolet mechanics

Real customer reviews from Chevrolet owners like you.

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0
Number of Chevrolet Avalanche 1500 Car Thermostat Replacement services completed
33+
services done by our mechanics
TOTAL NUMBER OF EXPERT Chevrolet MECHANICS
1600+
experts on our platform

Recent articles & questions

The Best Used Cars to Buy to Maximize Resale Value
A A car is not an investment. An investment, by definition, increases in value. A car is a necessary purchase, and it will never appreciate in value, with the possible exception of classics and antiques. So, as a used car...
How to Buy a Good Quality Fuel Injector
Getting Getting fuel directly to an engine is accomplished through an electronic fuel injector; with each cylinder getting its own dose of fuel which is much more efficient than the ways carburetors would send fuel directly to the engine in...
P0415 OBD-II Trouble Code: Secondary Air Injection System Switching Valve B Circuit Malfunction
P0415 code means a voltage signal from the secondary air injection system which falls outside of the expected parameters.

Windshield wipers getting stuck in random positions

Hi there. Even though you have replaced the wiper motor, there is an issue that most overlook. There is wiring that goes into the motor. If this wiring is corroded, this will cause your window motor to stop in random...

When it's hot out my car won't start, any ideas?

A couple of things come to mind. I would first ask these questions: Is this a no crank or a no start? I will address both scenarios below. A no crank is when the motor doesn't turn when you turn...

My car want accelerate and my engine light is constantly blinking on and off

Hello. A misfire under load is typically caused by a problem in the secondary ignition system (i.e. plugs (https://www.yourmechanic.com/services/spark-plugs-replacement), wires (https://www.yourmechanic.com/services/ignition-cable-spark-plug-wires-replacement), coil pack (https://www.yourmechanic.com/services/ignition-coil-replacement)). This will also cause your Check Engine Light to flash. The powertrain control module (PCM) directly...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com