Cadillac Brougham Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(23)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(23)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Cadillac Brougham Car Thermostat Replacement is $207 with $67 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Cadillac BroughamV8-5.7LService typeCar Thermostat ReplacementEstimate$323.98Shop/Dealer Price$372.53 - $503.99
1990 Cadillac BroughamV8-5.0LService typeCar Thermostat ReplacementEstimate$314.21Shop/Dealer Price$359.47 - $488.05
1992 Cadillac BroughamV8-5.7LService typeCar Thermostat ReplacementEstimate$314.97Shop/Dealer Price$360.47 - $489.64
1992 Cadillac BroughamV8-5.0LService typeCar Thermostat ReplacementEstimate$314.97Shop/Dealer Price$360.47 - $489.64
1991 Cadillac BroughamV8-5.7LService typeCar Thermostat ReplacementEstimate$314.97Shop/Dealer Price$363.04 - $494.15
1991 Cadillac BroughamV8-5.0LService typeCar Thermostat ReplacementEstimate$314.97Shop/Dealer Price$360.71 - $490.07
Show example Cadillac Brougham Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Cadillac mechanics

Real customer reviews from Cadillac owners like you.

Excellent Rating

(23)

Rating Summary
23
0
0
0
0
23
0
0
0
0

Paul

26 years of experience
280 reviews
Paul
26 years of experience
Cadillac Brougham V8-5.7L - Fuel Pump - Las Vegas, Nevada
very knowledgeable and it showed.

Mike

27 years of experience
265 reviews
Mike
27 years of experience
Cadillac Brougham V8-5.0L - Windshield Wiper Motor Replacement (Front) - Detroit, Michigan
Very friendly and professional.

Christian

11 years of experience
36 reviews
Christian
11 years of experience
Cadillac Brougham V8-5.0L - Spark Plugs - Fort Lauderdale, Florida
Outstanding young man with extreme talent to work on my 30 plus year Cadillac. Friendly and knowledgeable about cars, polite and professional. Thank you Christian, hope you will be able to continue to repair my 1991 Cadillac Brougham

Brandon

19 years of experience
10 reviews
Brandon
19 years of experience
Cadillac Brougham V8-5.7L - Water Pump - Fresno, California
Brandon helped me with two cars. He was quick and professional and saved me a lot of time and hassle.

Excellent Rating

(23)

Rating Summary
23
0
0
0
0
23
0
0
0
0
Number of Cadillac Brougham services completed
253+
services done by our mechanics
TOTAL NUMBER OF EXPERT Cadillac MECHANICS
1000+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Brake Pedal Pad
Think Think about how often you use the brakes in your vehicle, probably very often. With that said, over time your brake pedal pad can become worn down and even lose its ridges and traction. The last thing you want...
5 Essential Things to Know About Front-Wheel Drive (FWD)
Many Many new (and old) vehicles have front-wheel drive (FWD). However, it helps to have a good understanding of exactly what that means before you make the decision on which car is the right one for you. Here, you’ll find...
Symptoms of a Bad or Failing Pitman Arm Shaft Seal
If the power steering fluid is leaking, at a low level, or making a noise, you may need to replace the pitman arm shaft seal.

Transmission doesn't work when it's cold

Sounds like its almost time for a transmission rebuild. An automatic transmission has rubber seals inside similar to o-rings. These seals get hard over time and no longer do their job. Letting the car heat up also heats up the...

Burning wire smell coming from the alternator

The howling sound you are hearing is most likely your alternator failing. When it starts to make this kind of sound, this is a sign of the bearings inside beginning to fail (hence the whining noise) or the diodes inside...

Engine gets hot, heater blows cold air

Hi Ray. Thanks for contacting us today. When the engine gets hot and the heater blows cold air, it's usually caused by either an obstruction of debris inside the heater core. When a water pump or thermostat does not work,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com