Buick Encore Banging noises when driving over the bumps Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(91)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(91)

Banging noises when driving over the bumps Inspection Service

How much does a Banging noises when driving over the bumps Inspection cost?

On average, the cost for a Buick Encore Banging noises when driving over the bumps Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2021 Buick EncoreL4-1.4L TurboService typeBanging noises when driving over the bumps InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2013 Buick EncoreL4-1.4L TurboService typeBanging noises when driving over the bumps InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2016 Buick EncoreL4-1.4L TurboService typeBanging noises when driving over the bumps InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2017 Buick EncoreL4-1.4L TurboService typeBanging noises when driving over the bumps InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2018 Buick EncoreL4-1.4L TurboService typeBanging noises when driving over the bumps InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2020 Buick EncoreL4-1.4L TurboService typeBanging noises when driving over the bumps InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2022 Buick EncoreL4-1.4L TurboService typeBanging noises when driving over the bumps InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2014 Buick EncoreL4-1.4L TurboService typeBanging noises when driving over the bumps InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Buick Encore Banging noises when driving over the bumps Inspection prices

Unfortunately we don’t always find ourselves driving over perfectly smooth, freshly paved roads. And while rough roads may cause some issues with your vehicle, they can also help diagnose potential issues. A banging noise while driving over bumps can be startling for a driver, especially if the same noise did not manifest itself on flat roads. If you notice a banging noise while driving over a bump, you should have a mechanic inspect your vehicle.

How this system works:

Your vehicle’s suspension system is made up of many components designed to adjust when driving over rough terrain, to ensure a comfortable ride. When these components begin to fail, they may produce clunking or banging noises to let you know something has gone wrong. However, typically when suspension components like tie rod ends and ball joints fail, they will make a banging noise all the time, and not just over bumps. The fact that the noise only seems to occur while driving over a bump may be a sign of a different issue.

Common reasons for this to happen:

  • Bad Sway Bar Link: A vehicle’s sway bar or anti-roll bar, helps reduce body roll while cornering. Sway bars can help keep a vehicle from rolling over when going around a sharp corner. If the sway bar breaks or is damaged it may produce a clunking or knocking sound, especially when going over bumps. Your vehicle may also had more difficulty handling when the sway bar is damaged.

  • Worn Control Arm Bushings: The control arms on your vehicle’s suspension allow for movement up and down when driving on uneven terrain. Part of the control arm assembly are bushing, typically made of rubber or polyurethane. The bushings are designed to dampen any noise that might be created when your vehicle goes over a bump. If the bushing wear down, the noise is not dampened and you may hear a resulting bang when driving over bumps.

  • Loose Brake Caliper: Your vehicle’s brake calipers are pistons that engage the brakes when the brake pedal is applied. Calipers are typically secured with bolts and do not move. If a caliper bolt has become loose it may cause the caliper to make a banging noise when driving over bumps.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason for the banging noise when going over bumps. The mechanic will then provide a detailed inspection report outlining the reason for the noise and the cost of any repairs that need to be made.

How it's done:

The mechanic will begin by raising the vehicle and removing tires to get a better view of the vehicle’s suspension. From here, he or she will be better able to access and replace components that may have failed.

If your vehicle is equipped with a sway bar link, the mechanic will inspect it for any signs of superficial damage. The mechanic should then look at the sway bar bushings to see if they are worn and need to be replaced. The mechanic will then remove the old bushings and sway bar if necessary, and replace them.

If the mechanic suspects the control arm bushings, he or she will check for signs that the bushing has worn down. The mechanic should also inspect the whole control arm assembly and replace it if necessary. The mechanic will then install the new bushings.

While having a loose caliper bolt is rare, it is important to have the calipers inspected because of the potential loss in braking the bad calipers could create. The mechanic should check to make sure that the bolts are securely tightened and the calipers is lined up with the rotor. If the calipers was loose it may have warped over time and become ineffective. The mechanic will replace the caliper if it is needed.

How important is this service?

A vehicle that makes a banging noise while going over a bump may reveal an issue with the suspension system. Not only does the suspension system provide a comfortable ride but it plays a critical role in the safety of the vehicle, especially when cornering and braking. If you notice a noise while going over bumps, you should have it inspected to make sure that the suspension is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Buick mechanics

Real customer reviews from Buick owners like you.

Excellent Rating

(91)

Rating Summary
83
4
1
0
3
83
4
1
0
3

Claud

8 years of experience
485 reviews
Claud
8 years of experience
Buick Encore L4-1.4L Turbo - Battery - Southfield, Michigan
Awesome service and very informative

Brian

18 years of experience
74 reviews
Brian
18 years of experience
Buick Encore L4-1.4L Turbo - Pre-purchase Car Inspection - Stockton, California
Brian did a pre-purchase inspection for me. He was friendly and did a thorough job.

Peter

25 years of experience
523 reviews
Peter
25 years of experience
Buick Encore L4-1.4L Turbo - Car is not starting - Valencia, California
Fantastic. I was utterly surprised of how professional, talented, and approachable he was. I would recommend him to anyone. Great person and mechanic.

Anthony

7 years of experience
133 reviews
Anthony
7 years of experience
Buick Encore L4-1.4L Turbo - Car is not starting - Roseville, California
Fantastic young man, very knowledgeable. Upfront and honest about what we needed.

Excellent Rating

(91)

Rating Summary
83
4
1
0
3
83
4
1
0
3
Number of Buick Encore services completed
1001+
services done by our mechanics
TOTAL NUMBER OF EXPERT Buick MECHANICS
800+
experts on our platform

Recent articles & questions

North Dakota Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of North Dakota. Speed limits in North Dakota 75 mph: interstates in rural and mid-sized urban areas 70 mph:...
What are the Car Pool Rules in Nebraska?
Car Car pool lanes are increasing in popularity all across the country, and now span more than 3,000 miles in numerous states. These lanes exist to aid carpoolers – specifically employees who are ride sharing to work together – and...
How to Replace the Electronic Spark Control Module
The car ignition has an electronic spark control module that fails when the Check Engine Light illuminates or if the engine does not start.

P0420 OBD-II Trouble Code: Catalyst System Efficiency Below Threshold (Bank 1)

Hi there: the P0420 OBD-II Error code (https://www.yourmechanic.com/article/p0420-obd-ii-trouble-code-catalyst-system-efficiency-below-threshold-bank-1-by-jamahl-walker) indicates that the catalytic converter is not working as efficiently as it is intended. If the voltage of the downstream oxygen sensor decreases, and begins to fluctuate like the upstream oxygen sensor,...

Do I need to keep refrigerant in my A/C compressor during winter months

The refrigerant inside the compressor has nothing to do with the compressor pulley turning freely when the compressor is not engaged. If the pulley is not turning free then the bearing inside the pulley will need to be replaced. If...

My check engine light and traction control lights are on and the cruise control light is flashing on and off.

Hi There, What you are describing is common for a vehicle with traction control when it has been activated in a situation as you have described. The cruise control is also controlled in some cases by the traction control system...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com