BMW M6 Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(19)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(19)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a BMW M6 Car Thermostat Replacement is $221 with $81 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 BMW M6V10-5.0LService typeCar Thermostat ReplacementEstimate$1055.42Shop/Dealer Price$1176.48 - $1442.44
2010 BMW M6V10-5.0LService typeCar Thermostat ReplacementEstimate$1012.17Shop/Dealer Price$1112.03 - $1362.10
2009 BMW M6V10-5.0LService typeCar Thermostat ReplacementEstimate$1012.17Shop/Dealer Price$1112.34 - $1362.64
2015 BMW M6V8-4.4L TurboService typeCar Thermostat ReplacementEstimate$622.98Shop/Dealer Price$718.20 - $984.02
2008 BMW M6V10-5.0LService typeCar Thermostat ReplacementEstimate$1012.17Shop/Dealer Price$1130.00 - $1393.55
2017 BMW M6V8-4.4L TurboService typeCar Thermostat ReplacementEstimate$622.98Shop/Dealer Price$713.18 - $975.23
2014 BMW M6V8-4.4L TurboService typeCar Thermostat ReplacementEstimate$622.98Shop/Dealer Price$718.28 - $984.16
2018 BMW M6V8-4.4L TurboService typeCar Thermostat ReplacementEstimate$542.95Shop/Dealer Price$630.19 - $886.06
Show example BMW M6 Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(19)

Rating Summary
17
0
1
0
1
17
0
1
0
1

Benji

20 years of experience
206 reviews
Benji
20 years of experience
M6 2007 - Electric Problems - Phoenix, AZ
Benji arrived about 15 minutes early, which was a nice surprise. He asked me to describe the car's issues and it was immediately clear that he was an expert and was very experienced with high-end cars and electrical problems. Even though he quickly diagnosed the crux of the problem(s), he still took the time to check and rule out (or in) other potential sources and related system failures. This type of analysis never seems to occur at dealerships--instead, they jump to a conclusion (usually the most expensive) you are stuck with. The problem isn't solved or fully solved or some new problem crops up, and they explain why you now need to get more things done as well even though they supposedly weren't wrong with what they "fixed" first. Benji's approach was nothing like that. He was straightforward, logical, honest and smart. I also like knowing who is working on my car--which dealerships don't usually do. Instead, they put a "service advisor" buffer (and BS-er) between the car owner and the person actually doing the work--which leads to miscommunication and dissatisfaction. Customers don't need some bogus translator as though the techs can only speak in russian or some obscure language. Benji also showed me some of the read-outs he got as he tested things--which was helpful too. He understood the car's computer system and coding too--which is not simple in an M6. I would trust Benji with anything from a beloved 20yr old family volvo or pick-up truck to a Bugatti.

Excellent Rating

(19)

Rating Summary
17
0
1
0
1
17
0
1
0
1
Number of BMW M6 services completed
209+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

How to Replace an Air Conditioning Belt
Replacing an AC belt can be challenging, as you have to locate specific parts in the car in order to do so, and use proper tools to complete the task.
How to Determine Compression Ratio
Whether Whether you’re building a new engine and you need the metric, or you’re curious to know how efficient your car uses fuel, you have to be able to calculate the engine’s compression ratio. There are a few equations needed...
4 Signs of a Failing AC Evaporator
A broken air conditioner may be a result of a faulty AC evaporator. Symptoms include weak air, strange odors, and fluctuating temperatures.

Car knocking after repair

Often, when concerns follow recent repairs, the most recent repairs must be taken into question first. Knocking engine noise is never a good sign, but not always a death sentence either. If the knock gets louder or faster with engine...

Car shakes on starting, loses power & stalls uphill

Hello there, a few different faults can cause this sort of problem. In most cases, with the steering wheel locking not shifting into park and the limp mode you have experienced. It would be more likely there is an electrical...

Hi my car jerks while accelerating and cruising but most of the things that I’ve seen mentioned for the problem has been fixed already. Also my check engine light doesn’t come on to say the problem. My car is at 199,500 miles it’s a 2006 Nissan Sentra

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com