BMW ActiveHybrid 7 Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(62)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(62)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a BMW ActiveHybrid 7 Control Arm Assembly Replacement is $351 with $183 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 BMW ActiveHybrid 7L6-3.0L Turbo HybridService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$695.96Shop/Dealer Price$831.01 - $1219.15
2014 BMW ActiveHybrid 7L6-3.0L Turbo HybridService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$584.35Shop/Dealer Price$690.49 - $1000.25
2013 BMW ActiveHybrid 7L6-3.0L Turbo HybridService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$540.95Shop/Dealer Price$636.29 - $913.54
2015 BMW ActiveHybrid 7L6-3.0L Turbo HybridService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$967.65Shop/Dealer Price$1169.66 - $1766.93
2014 BMW ActiveHybrid 7L6-3.0L Turbo HybridService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$1577.33Shop/Dealer Price$1934.86 - $2991.71
2013 BMW ActiveHybrid 7L6-3.0L Turbo HybridService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$685.15Shop/Dealer Price$816.83 - $1202.45
2013 BMW ActiveHybrid 7L6-3.0L Turbo HybridService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$584.35Shop/Dealer Price$690.57 - $1000.39
2015 BMW ActiveHybrid 7L6-3.0L Turbo HybridService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$540.95Shop/Dealer Price$636.29 - $913.53
Show example BMW ActiveHybrid 7 Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(62)

Rating Summary
58
3
0
0
1
58
3
0
0
1

Abdoulie

5 years of experience
29 reviews
Abdoulie
5 years of experience
BMW 325i L6-2.5L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Farmington, Michigan
Great mechanic. On-time, courteous, and knowledgeable.

Elias

15 years of experience
225 reviews
Elias
15 years of experience
BMW 528i xDrive L4-2.0L Turbo - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Carteret, New Jersey
Very nice guy People person Very helpful

Sayeed

18 years of experience
82 reviews
Sayeed
18 years of experience
BMW X3 L6-3.0L - Control Arm Assembly Replacement (Front Upper Left, Front Lower Left) - Brooklyn, New York
Fixed the control arm on my X3 in about an hour, told me about what he was fixing as he was fixing it. Definitely recommend him(Or maybe not so he's not booked up when I need him lol j/k). After job was done made sure everything was sturdy.

Mazyar

20 years of experience
587 reviews
Mazyar
20 years of experience
BMW 530xi L6-3.0L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Conyers, Georgia
Did an excellent job, gave good advice

Excellent Rating

(62)

Rating Summary
58
3
0
0
1
58
3
0
0
1
Number of BMW Control Arm Assembly Replacement services completed
682+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

When to Replace Front Struts
Know the signs of front struts in need of replacement and when to take your car in to have them fixed.
Is it Safe to Drive With an Ear Infection?
An An ear infection is a viral or bacterial infection that affects the middle ear. Ear infections cause inflammation and buildup of fluids in the middle ear, which make them painful. Ear infections usually go away with treatment from a...
How to Prepare for the Wisconsin Driver’s Written Test
If If you are looking forward to getting your license in Wisconsin, you first need to take your written driver’s exam so you can get your learner’s permit and then take the road test. The written exam, as long as...

Car shut off and remained unresponsive since then - 2010 Mercedes-Benz S400 Hybrid

Hello. The PCM is a potential cause of the problem that you are experiencing. The PCM is the main computer for the car and could be malfunctioning. There could also be a problem with the electric motor of the hybrid...

Idle air valve calibration/adjustment

Hi there. It is suggested to have a bidirectional scan tool but it is not required. Verify the idle speed is within 650-750 rpm. You want to be at 700 rpm ideally. Connect data link connector terminals TEN & GND...

Hello Chris,

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com