BMW 745Li Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(37)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(37)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a BMW 745Li Mass Airflow Sensor Replacement is $413 with $318 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 BMW 745LiV8-4.4LService typeMass Airflow Sensor ReplacementEstimate$751.59Shop/Dealer Price$928.24 - $1418.82
2002 BMW 745LiV8-4.4LService typeMass Airflow Sensor ReplacementEstimate$760.59Shop/Dealer Price$944.52 - $1456.87
2005 BMW 745LiV8-4.4LService typeMass Airflow Sensor ReplacementEstimate$731.59Shop/Dealer Price$908.27 - $1398.87
2003 BMW 745LiV8-4.4LService typeMass Airflow Sensor ReplacementEstimate$760.59Shop/Dealer Price$944.48 - $1456.80
Show example BMW 745Li Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(37)

Rating Summary
36
0
0
1
0
36
0
0
1
0

Peter

43 years of experience
1321 reviews
Peter
43 years of experience
BMW 745Li V8-4.4L - Oil/Fluid Leak - Phoenix, Arizona
Very knowledgeable and experienced.

Patrick

32 years of experience
369 reviews
Patrick
32 years of experience
BMW 745Li V8-4.4L - Cooling System Flush - Indian Springs, Nevada
Patrick perform schedule work in a professional and timely manner. Two thumbs up!

Peter

43 years of experience
1321 reviews
Peter
43 years of experience
BMW 745Li V8-4.4L - Car idle is rough - Paradise Valley, Arizona
Peter was a perfect mechanic. He knew exactly what the issue was in my car. thank YOU!!!!!!!!!!!!!!!!

Daniel

21 years of experience
346 reviews
Daniel
21 years of experience
BMW 745Li V8-4.4L - Battery - Rosharon, Texas
Great Mechanic, and great recommendations base off your car needs. Well recommended.

Excellent Rating

(37)

Rating Summary
36
0
0
1
0
36
0
0
1
0
Number of BMW 745Li services completed
407+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Do Wiring Harnesses Last?
Car wiring harnesses connect all the different electrical systems and components in a vehicle. Wiring harnesses can last the lifetime of the vehicle.
How Long Does a Yaw Rate Sensor Last?
While While taking a curve at a high rate of speed seems like fun, it can also be quite dangerous. Luckily, there are a number of systems on a car that can make taking hairpin turns quickly much safer. The...
How to Replace a Brake Booster Vacuum Sensor
The brake booster vacuum pressure sensor is a vital part of power brake operation. A Check Engine Light or a hard brake pedal are signs of failure.

Speedometer not working correctly

Your assumption sounds about right, either the sensor and or the cable are sending some mixed signals to the dash and it doesn't know what to do with it. Have a certified mechanic take a look at your speedometer components...

Car starts, but quits; removing/replacing battery cable helps

Hello there, thank you for asking about your 2002 Chrysler Intrepid. You're correct in that a transmission mechanical problem would not come and go by simply disconnecting the battery. My guess is that the transmission shift solenoid pack has failed....

Where is the camshaft sensor position A in a 2008 Honda Odyssey 3.5L V6 engine?

Facing the motor in the van you will find the sensor in the front of the rear of the cylinder head. That would be passenger side of the rear head. Mounted in the end of the head.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com