BMW 545i Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(37)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(37)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a BMW 545i Intake Manifold Gaskets Replacement is $690 with $200 for parts and $490 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 BMW 545iV8-4.4LService typeIntake Manifold Gaskets ReplacementEstimate$942.76Shop/Dealer Price$1064.88 - $1381.61
2005 BMW 545iV8-4.4LService typeIntake Manifold Gaskets ReplacementEstimate$911.23Shop/Dealer Price$1022.52 - $1331.14
Show example BMW 545i Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(37)

Rating Summary
33
3
1
0
0
33
3
1
0
0

Joshua

12 years of experience
4 reviews
Joshua
12 years of experience
BMW 545i V8-4.4L - Drive Belt Tensioner - Los Angeles, California

Jay

24 years of experience
262 reviews
Jay
24 years of experience
BMW 545i V8-4.4L - Adjust Parking Brake Cable - Buffalo Grove, Illinois
I was hopeful he would be able to adjust parking brake but was unable to do so due to a locked up star adjusting nut. Will have to get towed to a shop to have fixed.

David

37 years of experience
195 reviews
David
37 years of experience
BMW 545i V8-4.4L - Alternator - Los Angeles, California
Amazing. He went out of his way to explain everything to me and show me other possible items that will need to be done in the future. He taught me a lot and helped me understand how to take care of my car better to have it run at its best. Very friendly and straight-forward. I trust him with my BMW from this day on!!

Carlos

17 years of experience
362 reviews
Carlos
17 years of experience
BMW 545i V8-4.4L - Oil Cooler Hose (Automatic Transmission) Replacement - Fort Worth, Texas
It was not an easy process but Carlos stuck with the job and got it done. Now the car is leak free thanks to Carlos.

Excellent Rating

(37)

Rating Summary
33
3
1
0
0
33
3
1
0
0
Number of BMW 545i services completed
407+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

Top 10 Scenic Drives in Maine
In the furthest north portion of New England, Maine is almost like a world unto itself. Its residents have such a unique accent and friendly manner that it seems almost foreign to the uninitiated, and there are so many natural...
B1946 OBD-II Trouble Code: Climate Control A/C Post Evaporator Sensor Circuit Failure
B1946 means there is a defect in the evaporator temperature sensor for the climate control system, likely due to a faulty sensor or damaged wiring.
The Traveler’s Guide to Driving in El Salvador
Over Over the past several years, the country of El Salvador has become a very popular location for tourists. There are a number of things to see and do in the country. You can visit Museo de Arte de El...

Car not going from park into reverse

Hi. There is a solenoid near your shifter that releases the shifter when the brake is applied. This circuit will need to be tested to determine if the brake switch, wiring, or solenoid is faulty. If you need further assistance,...

What kind of fuel pump does a 2005 Chevy venture have so I can buy one?

Hi there. The OEM replacement fuel pump for a 2005 Chevrolet Venture is GM Part No.: 19180125. I think you'll find that if you have one of our professional mobile mechanics come to your location and complete the fuel pump...

I'm trying to find out the location of a starter relay on an Audi A4 2005 3.0 6 cylinder engine

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com