BMW 535i GT Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a BMW 535i GT Fuel Injector Replacement is $1129 with $863 for parts and $266 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 BMW 535i GTL6-3.0L TurboService typeFuel Injector ReplacementEstimate$2020.06Shop/Dealer Price$2458.29 - $3757.59
2016 BMW 535i GTL6-3.0L TurboService typeFuel Injector ReplacementEstimate$2002.94Shop/Dealer Price$2440.43 - $3739.17
2013 BMW 535i GTL6-3.0L TurboService typeFuel Injector ReplacementEstimate$3933.74Shop/Dealer Price$4854.01 - $7600.92
2012 BMW 535i GTL6-3.0L TurboService typeFuel Injector ReplacementEstimate$3933.74Shop/Dealer Price$4854.01 - $7600.91
2010 BMW 535i GTL6-3.0L TurboService typeFuel Injector ReplacementEstimate$3933.74Shop/Dealer Price$4858.91 - $7609.48
2014 BMW 535i GTL6-3.0L TurboService typeFuel Injector ReplacementEstimate$2002.94Shop/Dealer Price$2440.98 - $3740.13
2015 BMW 535i GTL6-3.0L TurboService typeFuel Injector ReplacementEstimate$2002.94Shop/Dealer Price$2440.56 - $3739.40
2011 BMW 535i GTL6-3.0L TurboService typeFuel Injector ReplacementEstimate$3954.68Shop/Dealer Price$4880.18 - $7642.79
Show example BMW 535i GT Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(7)

Rating Summary
6
0
1
0
0
6
0
1
0
0

Michael

28 years of experience
672 reviews
Michael
28 years of experience
BMW 535i GT L6-3.0L Turbo - Spark Plugs - New River, Arizona
Mike dies great work. On time always. Understands my car and it's issues and fixes. Very knowledgable.

Manuel

33 years of experience
590 reviews
Manuel
33 years of experience
BMW 535i GT L6-3.0L Turbo - Oil Change - Yorba Linda, California
MANNY IS THE BEST! NOW MY NEIGHBOR IS GOING TO CHANGE HER SERVICE TO HIM....WE WILL GET THE WHOLE BLOCK SIGNED UP!

Jesse

18 years of experience
219 reviews
Jesse
18 years of experience
BMW 535i GT L6-3.0L Turbo - Loss of power - San Antonio, Texas
Jesse was very professional and observant. Assessed the issue and corrected previous mechanic's mistake. Definitely recommended!

Moses

21 years of experience
30 reviews
Moses
21 years of experience
BMW 535i GT L6-3.0L Turbo - Oil Change - Surprise, Arizona
your man was on time pleasant and quick and I very much like your service at my home. However there were oil spill marks in my driveway and on sidewalk that he never brought to my attention, also i expected any future work necessary he would show me then not now via email. the suggestion of tire rotation is sillly since those tires have been on for 2 weeks . Not a deal breaker but i'll ask for william next time.

Excellent Rating

(7)

Rating Summary
6
0
1
0
0
6
0
1
0
0
Number of BMW 535i GT services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1200+
experts on our platform

Recent articles & questions

How Much Does a Mechanic Make in Rhode Island?
Automotive technician jobs in Rhode Island have an mean mechanic salary of $40k, with some mechanics earning more than $58k.
How to Find Car Rental Discount Codes
Rental cars (https://www.yourmechanic.com/article/4-essential-things-to-know-before-renting-a-car) can be a significant expense on any vacation or business trip, especially if you are paying the full retail price asked by the rental company. It doesn’t have to be this way. Rental car companies, as well...
Common Signs Your Drive Belt Is Misaligned
Drive Drive belt problems usually manifest as noise. If you have a noisy drive belt, it’s important to know what’s causing it so that it can be fixed. That means you have to listen. If the drive belt or serpentine...

Hit a bump at 70 miles an hour, started jerking very badly when stopped, worse when the A/C is on, has trouble changing gears.

You may have a misfiring cylinder (https://www.yourmechanic.com/article/how-can-problems-with-the-ignition-system-cause-misfiring_2). If the spark plug boots are getting oil on them from a leaking valve cover or you have one or more ignition coils breaking down and not firing then this can be the...

I have a 2015 chevy Malibu, and the engine power reduced is on the dash. I have changed the throttle body, and the acceleration pe

An issue such as this would likely be associated with a check engine light. I would recommend having a qualified professional inspect your vehicle to determine the exact cause of this issue. Consider YourMechanic as check engine light inspections (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection)...

hey iam looking for help i coded my light for golf 7 tsi 2013 incorrect now they are messed up now i wanna code the to factory settting i have VCDS software.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com