BMW 528xi Parking brake is stuck Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(12)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(12)

Parking brake is stuck Inspection Service

How much does a Parking brake is stuck Inspection cost?

On average, the cost for a BMW 528xi Parking brake is stuck Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 BMW 528xiL6-3.0LService typeParking brake is stuck InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
Show example BMW 528xi Parking brake is stuck Inspection prices

Your parking brake is a valuable component that helps ensure better safety when parked on an incline, and also helps reduce unnecessary loading of the transmission. If you’ve ever parked on a hill and not used the parking brake, you’re familiar with the loud “thunk” and lurch that happens when you crank the car and put it in drive when you’re ready to leave. Engaging the parking brake avoids this, and enhances safety. However, if your parking brake is stuck, the light in your dash will stay on, and you may damage the brake shoes while driving.

How this system works:

Your parking brake is actually very little more than a lever attached to a cable. When you pull the parking brake handle in the cabin, it engages a cable. That cable runs from the parking brake handle under the car and to the back wheels. Pulling up on the handle pulls the cable taut, which engages the parking brake.

The brake itself is nothing more than a pair of small brake shoes mounted inside the drum built into the rear rotors of your car. The shoes press outward on the drum, holding the wheel in place (it’s not as strong as your normal brakes, and generally cannot hold the car by itself on anything more than a very gentle incline).

When you put the parking brake handle down, the cable disengages the parking brake and the shoes retract from against the walls of the drum. This releases the vehicle, allowing you to drive without damaging the parking brake.

Common reasons for this to happen:

  • Rust and Corrosion: One of the most common problems with parking brakes is corrosion on the cable that leads to the rear brakes. Once the cable begins to rust, it can stick. When this happens, you won’t be able to release the parking brake.

  • Engaged Too Hard: While uncommon, it is possible for the parking brake to stick if you applied it to hard. If you crank back on the handle as hard as possible, you’re overdoing it, and it’s possible for the cable to stretch, the shoes to stick and more.

  • Damaged/Stuck Adjuster Screw: The rear brake shoes are operated by an adjuster screw. If the screw is stuck, corroded or damaged, it will not move and your parking brake will not disengage.

  • Leaving It Engaged for Too Long: Most of us use our parking brake on a relatively limited basis, leaving it engaged overnight at the longest. In some situations, leaving it engaged for a long period (say over the winter in storage) can cause the assembly to freeze and stick.

What to expect:

Our professional mobile mechanic will come to your home or office to inspect the parking brake handle, cable, lever, adjusting screw, shoes and other components in the system. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect all aspects of the parking brake, from the handle to the cable, all the way back to the lever, the spring, the adjusting screw and the shoes. It may be necessary to remove one or both rear wheels. It may also be necessary to disassemble the rear brakes to reach the parking brake components.

How important is this service?

If your parking brake is stuck, you cannot drive the car without causing further damage. It’s highly advised to leave your car parked where it is if you notice that the Parking Brake light stays on after lowering the handle, or feeling resistance when trying to drive (or smelling burned brake material after driving). One of our professional mechanics will be able to diagnose the problem and restore functionality to your parking brake.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(12)

Rating Summary
10
0
0
0
2
10
0
0
0
2

Attila

19 years of experience
917 reviews
Attila
19 years of experience
BMW 528xi L6-3.0L - Starter - Scotch Plains, New Jersey
Honest, reliable and courteous. Thanks

Theodore

16 years of experience
1601 reviews
Theodore
16 years of experience
BMW 528xi L6-3.0L - Car is not starting - Redmond, Washington
Theodore was excellent with my bimmer. He's knowledgeable, efficient and experienced with German cars. Highly recommend him!

J.

16 years of experience
24 reviews
J.
16 years of experience
BMW 528xi L6-3.0L - Oil Change - Kansas City, Missouri
Very nice person

Huy

17 years of experience
9 reviews
Huy
17 years of experience
BMW 528xi L6-3.0L - Serpentine/Drive Belt - Tacoma, Washington
Fantastic and quick with the repair! 5 stars!

Excellent Rating

(12)

Rating Summary
10
0
0
0
2
10
0
0
0
2
Number of BMW 528xi services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Suzuki Grand Vitara
When When we talk about Suzuki, the first thing that comes to mind is the company’s decision in 2012 to pull its automobile division out of the United States market. Still, some of their lineup offers desirable features, and the...
Is it Safe to Drive with a Leaking Axle Seal?
An An axle seal is the part of the vehicle that connects the axle to the rear differential, or the transmission. The purpose of the axle seal is to keep transmission fluid from leaking. Depending on the size of the...
P2033 OBD-II Trouble Code: Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 2
P2033 trouble code definition Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 2 What the P2033 code means P2033 is an...

AC blows warm air, refrigerant was recharged.

Hi there. When the refrigerant was recharged, was the system evacuated and a vacuum test performed to ensure there are no leaks or moisture in the system? It sounds like the AC compressor may not be engaging. A blown fuse...

Knocking noise from engine and loss of power

The illumination of the check engine light means that diagnostic trouble codes were set during this incident. The codes are probably "related" to the knocking noise. If there was a mechanical failure in the engine, these codes could have simply...

2014 Ford Focus Blower Resistor Location

If you have Electronic Manual Temperature Control (EMTC), the blower motor resistor block is accessed by removing the accelerator pedal. Once the pedal is removed you will see the wiring harness to the block and the single retaining screw that...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com