BMW 528xi Brake pedal is spongy Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(13)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(13)

Brake pedal is spongy Inspection Service

How much does a Brake pedal is spongy Inspection cost?

On average, the cost for a BMW 528xi Brake pedal is spongy Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 BMW 528xiL6-3.0LService typeBrake pedal is spongy InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
Show example BMW 528xi Brake pedal is spongy Inspection prices

When you press your brake pedal, it should feel firm and solid. There should be only minimal travel in the pedal before the brakes are engaged, and it should not require significant effort to slow or stop your vehicle. If you’ve noticed your brake pedal feels spongy or soft, there’s a problem with the system that must be identified and repaired immediately.

How this system works:

The “feel” of your brake pedal is created by fluid pressure in the master cylinder and the brake lines. When you press the pedal to slow or stop your car, the master cylinder responds by pushing fluid into the lines that feed the calipers and drums (depending on your vehicle, you may have disc brakes in the front and drums in the rear, or you may have disc brakes on all four wheels).

Once the fluid reaches the calipers, they activate a piston that closes the caliper on the rotor, squeezing it between two brake pads. In the case of drum brakes, an actuator is activated, which pushes the shoes outward against the inner surface of the drum.

In a normally operating system, you should feel little to no difference in the firmness of the brake pedal during any part of operation. However, there are several potential problems that could lead to a spongy or soft pedal feel.

Common reasons for this to happen:

  • Air in the Lines: If air gets into the brake lines, either due to low brake fluid in the master cylinder or from other source, it will create a spongy feel and reduce your stopping ability. This is sometimes a common occurrence after an inexpert brake pad replacement or repair. Air should be bled from the system after every repair to ensure proper operation and safety.

  • Damaged Caliper: Another potential problem that could cause a spongy brake pedal is a damaged brake caliper. If the caliper’s piston seal has started to leak, this will create a soft pedal. Brake fluid may also contaminate the surface of the rotor and/or brake pads, leading to further problems.

  • Master Cylinder Wear: If your master cylinder is older, it can sustain enough wear and tear that it loses fluid pressure. This is generally caused by a fluid leak at the master cylinder. Again, any loss of fluid pressure will lead to a brake pedal that feels spongy or soft.

  • Brake Line Damage: Your vehicle has both rubber and metal brake lines, and either type can be damaged. When this happens, the line may become crimped, which reduces the flow of fluid through it, or it may begin leaking, which will reduce overall pressure. Both conditions lead to a spongy or soft brake pedal.

  • Moisture in Brake Fluid: If your brake fluid hasn’t been changed in a while, there’s a good chance that it has absorbed moisture. Moisture can be absorbed through the pores on rubber brake lines, leading to a spongy or soft brake pedal.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the entire brake system, including the master cylinder, the brake lines, the calipers, rotors and pads. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will need to inspect the entire system, with a particular focus on problems that cause air to be trapped in the lines, or that lead to low fluid levels in the brake system. The mechanic will need to inspect the calipers, the brake lines, the master cylinder and other components in order to determine the actual underlying cause of the problem.

How important is this service?

If you’re experiencing a spongy brake pedal, it’s a critical situation. Air in the lines or low brake fluid can compromise your safety on the road. Your brakes are the single most important safety system on your vehicle, and they must be professionally maintained at all times. One of our mechanics can inspect, diagnose and repair your car to ensure that you’re safe while driving.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert BMW mechanics

Real customer reviews from BMW owners like you.

Excellent Rating

(13)

Rating Summary
10
0
0
0
3
10
0
0
0
3

Theodore

16 years of experience
1604 reviews
Theodore
16 years of experience
BMW 528xi L6-3.0L - Car is not starting - Redmond, Washington
Theodore was excellent with my bimmer. He's knowledgeable, efficient and experienced with German cars. Highly recommend him!

Mohammed

9 years of experience
152 reviews
Mohammed
9 years of experience
BMW 528xi L6-3.0L - Check Engine Light is on - Raleigh, North Carolina
Mohammed is amazing!! Provided great service that was timely and detailed. He even provided additional assistance after the service was done via text. Will definitely recommend and work with again. Awesome job!

J.

16 years of experience
24 reviews
J.
16 years of experience
BMW 528xi L6-3.0L - Oil Change - Kansas City, Missouri
Very nice person

Huy

17 years of experience
9 reviews
Huy
17 years of experience
BMW 528xi L6-3.0L - Serpentine/Drive Belt - Tacoma, Washington
Fantastic and quick with the repair! 5 stars!

Excellent Rating

(13)

Rating Summary
10
0
0
0
3
10
0
0
0
3
Number of BMW 528xi services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT BMW MECHANICS
1100+
experts on our platform

Recent articles & questions

Why You Should Adjust Your Mirrors Before Your Drive
Your Your car has three mirrors that provide visibility and enhance safety on the road (as well as compliance with the law). These are your rear view mirror, and a car side mirror on both the driver and passenger sides...
Can Bad Wipers Damage or Scratch the Windshield?
Driving Driving with wiper blades that aren’t clearing properly can be more than just frustrating; it can be dangerous. Streaks and sections that don’t clear can obstruct your clear view of the road. Normally this is caused by bad wiper...
P0213 OBD-II Trouble Code: Cold Start Injector 1 Malfunction
P0213 P0213 code definition Cold Start Injector 1 Malfunction What the P0213 code means P0213 is an OBD-II diagnostic trouble code that is set when the Engine Control Module (ECM) detects an issue with the cold start number 1 fuel...

Brake lights don't work on 1994 Volvo 960

Hello. It sounds like you need a brake switch replacement (https://www.yourmechanic.com/services/brake-light-switch-replacement). These switches are a common failure. I usually test the switch with an ohm meter, which will tell me if it is bad. There are also other parts of...

Heating works only on defrost and works only at high speed

A car that old is not going to have self diagnostics in the heat AC system. So you don't need to bother with checking codes. Most cars use engine vacuum to control the heater flaps, and the defrost is the...

I have a mini r53 s (supercharged) runs fine but when car stop and AC is on for a wile car overheat

Your question makes me think of a case I ran into a few years ago. The owner had modified his car but when he installed his fans, one of them was wired backwards so the fan ran in reverse. The...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com