Audi V8 Quattro Automatic Shutdown Relay Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(2,399)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(2,399)

Automatic Shutdown Relay Replacement Service

How much does a Automatic Shutdown Relay Replacement cost?

On average, the cost for a Audi V8 Quattro Automatic Shutdown Relay Replacement is $114 with $19 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Audi V8 QuattroV8-3.6LService typeAutomatic Shutdown Relay ReplacementEstimate$153.15Shop/Dealer Price$180.19 - $221.94
1991 Audi V8 QuattroV8-3.6LService typeAutomatic Shutdown Relay ReplacementEstimate$133.15Shop/Dealer Price$160.22 - $201.99
Show example Audi V8 Quattro Automatic Shutdown Relay Replacement prices

What is the Automatic Shutdown Relay all about?

When you turn the key for your ignition to start, many different things happen. The fuel pump turns on, sending gas from the tank, through the lines, to the injectors. The battery sends voltage to the ignition system, which creates a spark, igniting fuel vapor and starting your engine. However, if the automatic shutdown relay (ASD) is not working, none of this will happen.

The automatic shutdown relay controls the power that is supplied to the ignition, the fuel pump, and the injectors, as well as other components. It is only activated for a few seconds during cranking, and is then turned off. Depending on the make and model in question, the automatic shutdown relay could be located under the hood, under the dash, or in another position.

As with any other electrical component, your automatic shutdown relay is subject to wear and tear, and frequent stopping and starting of the engine will exacerbate that wear. Eventually, it will fail and you’ll be left with a vehicle that doesn’t crank.

Keep in mind:

  • The ASD relay is not inspected during normal maintenance, and will only be checked during diagnostics for problems with the vehicle not cranking.
  • Many other problems can cause your engine not to crank, so professional diagnosis is necessary.
  • ASD failure is relatively rare, but it does happen.

How it's done:

  • The automatic shutdown relay is verified to see if it needs to be replaced
  • The defective automatic shutdown relay is removed
  • The new automatic shutdown relay is installed
  • The automatic shutdown relay is tested for operation
  • The vehicle is tested to ensure proper operation of the automatic shutdown relay

Our recommendation:

Your automatic shutdown relay provides power for some of the most important systems on your vehicle during ignition. If it fails, your engine will not crank, and it cannot be jumpstarted. If you are experiencing a no start condition, it may be the ASD relay, but it could be another problem. Seek immediate professional diagnosis and replacement by one of our expert mechanics.

What common symptoms indicate you may need to replace the Automatic Shutdown Relay?

  • Engine will not start
  • Check Engine light is on
  • Engine starts but stalls and dies

How important is this service?

Without an operational automatic shutdown relay, your engine will not start, which means your vehicle is not able to move. However, there are many other problems that can create the same symptom, ranging from a dead battery to a damaged battery, or a damaged cable to a failed main relay. If your automatic shutdown relay has failed, you will have to replace it before your vehicle will operate again.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(2,399)

Rating Summary
2,226
85
19
12
57
2,226
85
19
12
57

Johnathan

7 years of experience
110 reviews
Johnathan
7 years of experience
Audi A6 Quattro L4-2.0L Turbo - Ignition Coil - Arnold, Missouri
Johnathan was very professional and did an amazing job on my Audi A6

John

19 years of experience
86 reviews
John
19 years of experience
Audi A4 L4-2.0L Turbo - Oil Change - Memphis, Tennessee
Very knowledgeable and pleasant

Chris

16 years of experience
419 reviews
Chris
16 years of experience
Audi Q7 V8-4.2L - Oil Change - San Francisco, California
Great dude!

Nathan

29 years of experience
260 reviews
Nathan
29 years of experience
Audi A4 Quattro V6-2.8L - Wiper Gearbox Replacement (Front) - Tulsa, Oklahoma
Very pleasant. No complaints.

Excellent Rating

(2,399)

Rating Summary
2,226
85
19
12
57
2,226
85
19
12
57
Number of Audi services completed
26389+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

The Best Used Cars to Buy If You Live in a Windy Area
If If you live in a windy area, one of the most important things you’re going to be looking for in a used vehicle is the ability to remain stable on the road on even the most blustery days. That...
The Best Used Cars to Buy if You're Hauling a Horse Trailer
Horse Horse owners need a vehicle with towing capacity. Depending on the size of your trailer and the weight of your horse or horses, you probably won’t be able to get away with less than a 3,000-pound towing capacity, and...
Symptoms of Bad or Failing Fuel Injector O Rings
Common signs include an odor of fuel in the car, fuel leaks, and the Check Engine Light coming on.

P0012 and P0299. Can't get power when I accelerate and rpms goes high when the gears kick in.

Hello and thanks for contacting Your Mechanic. The code P0012 (https://www.yourmechanic.com/article/p0012-obd-ii-trouble-code-camshaft-position-a-timing-over-retarded-bank-1-by-jay-safford) means that the camshaft timing sensor is reading the camshaft is retarded. The code P0299 (https://www.yourmechanic.com/article/p0299-obd-ii-trouble-code-turbo-supercharger-underboost-condition-by-spencer-clayton) means that the turbo has excessive low output. Your turbo will not spool...

Will a Oxygen senor keep your car from cranking

You could completely remove the oxygen sensor(s) from the vehicle and that would not prevent the engine from starting. However, if you have a bad coolant temperature sensor which prevents the ECM/PCM from adjusting the air fuel ratio at start-up,...

Does my 2008 Cadillac CTS 3.6 have two timing chains.

Hello. To answer your question, yes, this engine has two timing chains. If you have a timing code coming up then you may simply need to have the oil changed or there may be a more serious issue. If you...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com