Audi Cabriolet Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(49)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(49)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Audi Cabriolet Valve Cover Gasket Replacement is $155 with $51 for parts and $104 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 Audi CabrioletV6-2.8LService typeValve Cover Gasket ReplacementEstimate$227.83Shop/Dealer Price$272.42 - $362.86
1998 Audi CabrioletV6-2.8LService typeValve Cover Gasket ReplacementEstimate$547.10Shop/Dealer Price$672.69 - $978.45
1996 Audi CabrioletV6-2.8LService typeValve Cover Gasket ReplacementEstimate$522.92Shop/Dealer Price$642.46 - $930.08
1997 Audi CabrioletV6-2.8LService typeValve Cover Gasket ReplacementEstimate$547.10Shop/Dealer Price$672.62 - $978.32
1995 Audi CabrioletV6-2.8LService typeValve Cover Gasket ReplacementEstimate$522.92Shop/Dealer Price$642.51 - $930.17
Show example Audi Cabriolet Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(49)

Rating Summary
48
0
0
0
1
48
0
0
0
1

Stephen

32 years of experience
178 reviews
Stephen
32 years of experience
Audi Cabriolet V6-2.8L - Car is not starting - Westminster, Colorado
He was able to diagnosed the problem, and able to fix ed my car. He's the only one, in fact. Thank you Stephen.

Brikk

18 years of experience
389 reviews
Brikk
18 years of experience
Audi Cabriolet V6-2.8L - Window is not working - Charlotte, North Carolina
Brick is very thorough and makes sure he does the job right.

Maxwell

18 years of experience
390 reviews
Maxwell
18 years of experience
Audi S5 V8-4.2L - Valve Cover Gasket - Cypress, Texas
Not my first experience with Maxwell, but it was just as good as the last.

James

31 years of experience
684 reviews
James
31 years of experience
Audi A6 Quattro V8-4.2L - Valve Cover Gasket - La Mirada, California
Punctual and profesional

Excellent Rating

(49)

Rating Summary
48
0
0
0
1
48
0
0
0
1
Number of Audi Valve Cover Gasket Replacement services completed
539+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

5 Essential Things to Know About Partial Zero Emissions Vehicles (PZEV)
If If you’ve always assumed that Partial Zero Emissions Vehicles (PZEVs) were some kind of electric vehicle, it’s time for a bit of a car lesson. Here we’ll explain what all those letters mean, and how they affect you –...
How to Choose What Type of Car You Would Like to Build
Car Car shows are packed with vehicles that have been customized to one degree or another. Many custom cars have everything from custom paint jobs to engine modifications, from oversized wheels (https://www.yourmechanic.com/article/all-about-oversized-wheels-and-tires) to personalized interior work, even sound system or...
Minnesota Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of Minnesota. Speed limits in Minnesota 70 mph: interstates outside of urban districts 65 mph: urban interstates, and urban...

Car clicking and flapping when turning

You may have an issue in the steering linkage such as a worn tie rod end or a problem in the steering rack or mount. The steering system needs to be inspected (https://www.yourmechanic.com/services/brakes-steering-and-suspension-system-inspection) immediately as a failure in the steering...

55,000-mile scheduled maintenance service,

This maintenance service will depend greatly on the type of vehicle that you have. Some vehicles will only require an oil change (https://www.yourmechanic.com/services/change-oil-and-filter) and tire rotation (https://www.yourmechanic.com/services/rotate-tires) at that time. Other vehicles may require that plus a coolant flush (https://www.yourmechanic.com/services/cooling-system-flush),...

Reduced Engine performance message, car cannot exceed 10 mph

Hello, thank you for writing in. The engine codes you are receiving are indicating that your throttle position sensor (https://www.yourmechanic.com/parts/throttle-position-sensor) and its circuit are not functioning correctly. If you are comfortable with swapping the entire unit out, then that is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com