Audi A6 Car is hard to start Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(63)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(63)

Car is hard to start Inspection Service

How much does a Car is hard to start Inspection cost?

On average, the cost for a Audi A6 Car is hard to start Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Audi A6V6-3.0LService typeCar is hard to start InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2016 Audi A6L4-2.0L TurboService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2001 Audi A6V6-2.8LService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2006 Audi A6V6-3.2LService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
1996 Audi A6V6-2.8LService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
2000 Audi A6V6-2.8LService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2014 Audi A6L4-2.0L TurboService typeCar is hard to start InspectionEstimate$99.99Shop/Dealer Price$117.28 - $130.25
1995 Audi A6V6-2.8LService typeCar is hard to start InspectionEstimate$99.99Shop/Dealer Price$117.94 - $131.39
Show example Audi A6 Car is hard to start Inspection prices

A car that is hard to start can be a major inconvenience. While this is usually not a life threatening malfunction, it can make getting around much more difficult. There are a number of issues that will make a car hard to start. Everything from the electrical system to the fuel system to the actual starter itself can be the problem.

Finding the root cause of a hard starting engine can take some investigation. Ignoring a hard starting issue can further damage the vehicle, which will often result in a more expensive repair.

How this system works:

In order to get an engine running, it must be turned at speed so that it starts to suck fuel and air into the cylinders, and then compress and ignite this fuel/air mixture.

The starter motor is an electric motor that turns the engine to get it started. The starter motor has a small pinion gear wheel that engages with a larger gear ring at the rim of the engine flywheel.

The starter motor draws the electric current it needs to run from the battery. The starter needs a heavy current and to avoid sparking a solenoid is used. The ignition switch operates the starter motor. When the ignition is turned on, current is fed to the solenoid and into the starter motor. Once the car engine starts and the key is released, the starter motor turns off.

Common reasons for this to happen:

  • Bad Starter: Over time starter motors can wear out and start to malfunction. If this is the problem the starter will have to be replaced. If the car turns over, the problem is not the starter. If nothing happens when the key is turned the problem could be the starter, or if the car turns over very slowly and the dash lights dim while it is cranking, the starter could be the culprit.

  • Bad Relay Wiring: The wiring between the battery and starter can become loose or broken which will prevent the starter motor from functioning. The wiring will need to be replaced or repaired.

  • Low or Dead Battery: The starter motor needs voltage from the battery to operate. If the battery is low or failing it may not produce enough current for the starter motor to function. Charging or replacing the batter should resolve this problem.

It is also possible that the battery terminals have become corroded or loose. Cleaning and tightening the terminals and cables is recommended.

  • Failing Solenoid: A failing solenoid is a common issue with the starter system and if the solenoid is going bad, the car will be difficult to start. The starter will need to be inspected to determine if the problem is the starter motor itself or the solenoid. A failing solenoid will need to be replaced.

  • Failing Ignition Switch: Over time an ignition switch can start to fail and one of the most common symptoms is that the car is hard to start. If the ignition switch is hot to the touch this indicates an issue with the ignition switch wiring. A failing ignition switch will eventually stop working completely and will need to be replaced.

  • Defective Fuel Pump: If the engine is not getting enough fuel, it will be hard, if not impossible to start. The fuel pump is responsible for pulling gas from the tank to the injectors and if it is not delivering enough fuel the car will be difficult to start and eventually will not start at all.

  • Fouled Plugs: Spark plugs create the spark which allows the vehicle to burn fuel. Fouled plugs are one of the most common reasons for a hard starting engine. As electrodes wear down, the voltage required to jump the gap to ignite the fuel increases. This can lead to prolonged cranking before the engine will start.

  • Clogged Fuel Filter: A fuel filter that is clogged can make a vehicle very difficult to start. The fuel filter screens out contaminants and can become clogged over time. This will prevent the injectors from getting enough fuel, making the car hard to start.

  • Contaminated Fuel: Fuel that has too much alcohol or water in it will result in a car that is difficult and often impossible to start. Even if it does start, contaminated fuel can do serious damage to the engine. If contaminated fuel is suspected, have the vehicle inspected immediately.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the hard to start issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The starter, battery, connecting wiring and other important components will be inspected by the mechanic. This may include the vehicle's fuel pump, fuel filter, spark plugs, ignition and more. It may be necessary for the mechanic to crank up the car to verify the problem and issue an accurate diagnosis.

How important is this service?

If a car is hard to start, it's indicative of a major condition preventing normal operation and if left unattended it may lead to the car not starting at all. The vehicle should be inspected and repaired as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(63)

Rating Summary
58
1
0
0
4
58
1
0
0
4

Ostus

8 years of experience
70 reviews
Ostus
8 years of experience
Audi A6 L4-2.0L Turbo - Brake Pads Replacement (Front) - McDonough, Georgia
I was impressed with the service provided by Ostus and I look forward to having him service my vehicle in the future. He will also be highly recommended to others. Thanks

Jeffrey

21 years of experience
55 reviews
Jeffrey
21 years of experience
Audi A6 V6-3.2L - Oil Change - San Jose, California

Carlos

28 years of experience
516 reviews
Carlos
28 years of experience
Audi A6 V6-3.2L - Valve Cover Gasket - Fontana, California
Carlos was very nice and thorough, explained everything to me. Showed me exactly what was wrong with my car fixed it and got me back on the road.

Sayeed

17 years of experience
82 reviews
Sayeed
17 years of experience
Audi A6 L4-2.0L Turbo - Car Battery Replacement - Brooklyn, New York
It was a pleasure getting my car service by Sayeed. I would recommend him whole heartedly to any and everyone for service to their vehicle. Thanks Sayeed, once again.

Excellent Rating

(63)

Rating Summary
58
1
0
0
4
58
1
0
0
4
Number of Audi A6 services completed
693+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

P0497 OBD-II Trouble Code: Evaporative Control System Malfunction
P0497 P0497 OBD-II Trouble Code: Evaporative Control System Malfunction Diagnostic Trouble Code (DTC): P0497 P0497 code definition The P0497 code, or Evaporative Emission System Low Purge Flow, is indicative of a problem somewhere in the EVAP control system. What the...
P0343 OBD-II Trouble Code: Camshaft Position Sensor Circuit High Input
P0343 means theres a problem with the camshaft position sensor which has usually been fouled from oil and moisture causing a bad ground or voltage.
How to Replace an Air Conditioning Belt
Replacing an AC belt can be challenging, as you have to locate specific parts in the car in order to do so, and use proper tools to complete the task.

P0111 engine code

On most Fiats, there is a mass air flow sensor at the air box, and if you look at the air box, it may have a separate hose coming off of it going into the air intake system and in...

Is it dangerous to drive your car with spark plugs misfiring?

To answer your question, yes it is unsafe to drive you car while you are having a misfire. I have provided an article written by one of our professional technicians below. https://www.yourmechanic.com/article/is-it-safe-to-drive-with-a-misfiring-cylinder.

Flex Pipe to replace

In your application, the flex pipe is a 2 foot long exhaust pipe that connects the exhaust manifold on the car engine to the catalytic converter. The flexible segment on the "flex pipe" is just 6 inches in length and...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com