Audi A6 Quattro Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(35)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(35)

Brake Pad Replacement Estimate for Audi A6 Quattro

Audi A6 Quattro Brake Pad Replacement costs $198 on average.

CarServiceEstimateShop/Dealer Price
2012 Audi A6 QuattroV6-3.0L TurboService typeBrake Pads - Rear ReplacementEstimate$367.07Shop/Dealer Price$460.84 - $687.03
2014 Audi A6 QuattroV6-3.0L Turbo DieselService typeBrake Pads - Front ReplacementEstimate$260.59Shop/Dealer Price$327.82 - $470.83
2002 Audi A6 QuattroV8-4.2LService typeBrake Pads - Front ReplacementEstimate$251.03Shop/Dealer Price$316.04 - $447.50
2013 Audi A6 QuattroL4-2.0L TurboService typeBrake Pads - Front ReplacementEstimate$271.59Shop/Dealer Price$341.52 - $492.74
2003 Audi A6 QuattroV8-4.2LService typeBrake Pads - Front ReplacementEstimate$251.03Shop/Dealer Price$316.07 - $447.57
2003 Audi A6 QuattroV6-2.7L TurboService typeBrake Pads - Front ReplacementEstimate$251.03Shop/Dealer Price$316.04 - $447.50
2006 Audi A6 QuattroV6-3.2LService typeBrake Pads - Front ReplacementEstimate$232.03Shop/Dealer Price$290.28 - $416.68
2018 Audi A6 QuattroL4-2.0L TurboService typeBrake Pads - Rear ReplacementEstimate$284.51Shop/Dealer Price$345.32 - $493.60
Show example Audi A6 Quattro Brake Pad Replacement prices

Brake Pad Replacement Service

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(35)

Rating Summary
34
1
0
0
0
34
1
0
0
0

Mark

10 years of experience
80 reviews
Mark
10 years of experience
A6 Quattro 2013 - Brake Pads - Fishers, IN
Mark was an amazing mechanic. He was on time, and was extremely knowledgeable. He was great to talk to and help with other issues I had. I can’t say enough good things about him. I will alway book with Mark in the future. Oh and he fixed the front breaks perfectly too.

Caz

13 years of experience
86 reviews
Caz
13 years of experience
A6 Quattro 2011 - Spark Plugs - Atlanta, GA
Very quick and convenient!

Ramiro

0 years of experience
76 reviews
Ramiro
0 years of experience
A6 Quattro 2013 - Oil Change - Sammamish, WA
Ramiro did a great job. He was timely, professional, didn't leave a mess for me to deal with. Highly recommend his services.

Collins

8 years of experience
362 reviews
Collins
8 years of experience
A6 Quattro 2007 - Car will not turn over - Atlanta, GA
Very helpful from start to finish.

Excellent Rating

(35)

Rating Summary
34
1
0
0
0
34
1
0
0
0
Number of Audi A6 Quattro Brake Pads Replacement services completed
385+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

P0275 OBD-II Trouble Code: Cylinder 5 Contribution/Balance Fault
P0275 means that there is something is wrong with the way the fifth cylinder is processing fuel due to the fuel injector.
How to Replace a Secondary Air Injection Hose
A car's secondary air injection system allows oxygen into the exhaust. If a hose is faulty, a car may have increased emissions and performance issues.
What are the Car Pool Rules in Wisconsin?
Wisconsin Wisconsin may be a relatively rural state, but it still has a fair share of large cities. Every weekday, tens of thousands of Wisconsin citizens have to commute into Milwaukee, Green Bay, and other cities for work, and out...

2002 s-10 4 wheel drive question when you press 4 wheel drive button either hi or low it blinks once and goes back to 2 wheel dri

Check to see if hose hooks to the air cleaner assembly? As far as the 4x4 not shifting you may have a transfer case not shifting internally and will cause the problem. Have a mechanic like one from YourMechanic check...

Why Dose my car make a whistle noise when am driving

There are a number of things that may produce a whistling sound. Depending on when the sound happens, the result may be different. If the whistling is constant while traveling down the road, this may be related an improperly sealing...

If i replace transmission and motor mounts do I need to replace the transmission also?

It doesn't sound like there is any reason for you to replace the transmission. The motor mounts and transmission mounts are flexible rubber supports that keep the engine and transmission in place while preventing their vibration from getting to the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com