Audi A4 Quattro Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(429)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(429)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Audi A4 Quattro Mass Airflow Sensor Replacement is $206 with $111 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Audi A4 QuattroV6-2.8LService typeMass Airflow Sensor ReplacementEstimate$673.59Shop/Dealer Price$830.74 - $1262.82
2003 Audi A4 QuattroV6-3.0LService typeMass Airflow Sensor ReplacementEstimate$498.09Shop/Dealer Price$616.40 - $931.87
1998 Audi A4 QuattroV6-2.8LService typeMass Airflow Sensor ReplacementEstimate$445.39Shop/Dealer Price$550.52 - $826.47
2000 Audi A4 QuattroL4-1.8L TurboService typeMass Airflow Sensor ReplacementEstimate$316.47Shop/Dealer Price$389.33 - $568.56
1996 Audi A4 QuattroV6-2.8LService typeMass Airflow Sensor ReplacementEstimate$445.39Shop/Dealer Price$550.55 - $826.52
1999 Audi A4 QuattroV6-2.8LService typeMass Airflow Sensor ReplacementEstimate$686.59Shop/Dealer Price$852.02 - $1308.87
2004 Audi A4 QuattroL4-1.8L TurboService typeMass Airflow Sensor ReplacementEstimate$501.18Shop/Dealer Price$612.61 - $876.85
2018 Audi A4 QuattroL4-2.0L TurboService typeMass Airflow Sensor ReplacementEstimate$572.29Shop/Dealer Price$700.62 - $1062.54
Show example Audi A4 Quattro Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(429)

Rating Summary
393
20
5
2
9
393
20
5
2
9

Sebastian

5 years of experience
6 reviews
Sebastian
5 years of experience
A4 Quattro 2004 - Car is not starting - West Palm Beach, FL
Very helpful ❗️To me and my car would recommend to friends

Zachery

6 years of experience
14 reviews
Zachery
6 years of experience
A4 Quattro 2002 - Battery - Columbus, OH
Zachery was very freindly and courteous. He explained everything in detail and was a very good experience. Will definitely use this service again.

Robert

15 years of experience
1061 reviews
Robert
15 years of experience
A4 Quattro 2003 - Fuel Pump - Arvada, CO
Robert was on time answered any questions

Charles

2 years of experience
72 reviews
Charles
2 years of experience
A4 Quattro 2007 - Fuel Pressure Regulator - Goodlettsville, TN
Well first off Charles showed up 30 minutes earlier than the appointment time which I appreciate he was very knowledgeable very courteous and had me up and running within 30 minutes literally nothing I have to say this is one of the best mechanic experiences I've ever had I would highly recommend Charles if you have any auto problems

Excellent Rating

(429)

Rating Summary
393
20
5
2
9
393
20
5
2
9
Number of Audi A4 Quattro services completed
4719+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing EVP Position Sensor
Common signs include poor cold start performance, the Check Engine Light coming on, and failing an emissions test.
How Long Does an EGR Pressure Feedback Sensor Last?
In In today's world people are more aware of exhaust gases than ever before. With that said measures have been built into modern vehicles that are meant to cut down on the emissions released into the air. Built into your...
How Long Does a Low Oil Level Sensor Last?
Having Having the right amount of oil in an engine is important to the smooth running of your engine. In order for the engine on a car to run as intended, it will have to have the right amount of...

CEL limp mode reflash

Hello there. The type of issues you have described are not uncommon with the newer F series diesel trucks. The technical service bulletins (https://www.yourmechanic.com/article/how-to-use-a-technical-service-bulletin-by-parker-hill) are put out as a way to get vehicles repaired properly once a common failure point...

The car idles fine. It revs up but slowly drops RPMs.

Hi there: The idle is controlled by the idle control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement), mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement), and throttle body (https://www.yourmechanic.com/services/throttle-body-replacement) of a fuel injected motor. Any of these components could be dirty, damaged, or have faulty wiring that is...

Where is located the sensor camshaft on my avenger 2009 2.4l?

Hi there. The camshaft position sensor is located in the back of the engine next to the EGR engine gas recirculation valve attached to the cylinder head under the valve cover. It would be round with two bolts and have...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com