Audi 80 Brake Drum Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Brake Drum Replacement Service

How much does a Brake Drum Replacement cost?

On average, the cost for a Audi 80 Brake Drum Replacement is $353 with $229 for parts and $123 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
1988 Audi 80L4-2.0L	Service typeBrake Drum Replacement	Estimate$608.39	Shop/Dealer Price$745.87 - $1107.11
1992 Audi 80L5-2.3L	Service typeBrake Drum Replacement	Estimate$610.88	Shop/Dealer Price$753.66 - $1118.88
1991 Audi 80L5-2.3L	Service typeBrake Drum Replacement	Estimate$610.88	Shop/Dealer Price$753.66 - $1118.87
1989 Audi 80L4-2.0L	Service typeBrake Drum Replacement	Estimate$610.88	Shop/Dealer Price$753.60 - $1118.76
1990 Audi 80L4-2.0L	Service typeBrake Drum Replacement	Estimate$610.88	Shop/Dealer Price$753.70 - $1118.95

Show example Audi 80 Brake Drum Replacement prices

What are brake drums and how do they work?

A brake drum is a heavy, cast iron brake system part that looks like a shallow, several inches-high cylinder about 9 to 12 inches in diameter. The brake drum has a precisely machined surface all around the interior circumference, that the brake shoes make contact with when you apply the brakes, transmitting hydraulic pressure through the wheel cylinder. This forces the brake shoes outward against the interior of the brake drum, resulting in the friction that causes the car to slow. The brake drum is mounted over, and fully encloses, all of the rear brake components such as the wheel cylinder, springs and clips, brake shoes, and parking brake mechanism. The drum is commonly held to the wheel hub by the wheel and the lug nuts, but some configurations combine the drum with the wheel hub as one unit. Nowadays, a drum brake type system is only installed on the rear axle, if used at all, as 4 wheel disc type systems have become more common.

When to consider replacing brake drums:

Reduced braking effectiveness. If the brake drum is unevenly worn, scored or cracked, it will increase stopping distances. A cracked drum must be replaced outright but a worn drum can be restored on a brake lathe so long as enough metal material remains.
Pulsating brakes, pulling to one side, vibration or noise. If a brake drum is warped, is unevenly worn, or perhaps the brake shoes have worn down completely — creating metal-to-metal contact — you might detect pedal pulsation, the vehicle may pull to one side, or you might feel a vibration or hear a noise when you apply the brakes. The brake system will have to be inspected to pinpoint the exact problem.
Brake shoe replacement. Anytime the brake shoes are replaced, the drum must either be resurfaced or replaced outright. Installing new brake shoes on a used, unresurfaced drum will lead to poor results.
Loss of parking brake function. The parking brake locks the brake shoes against the brake drum. If the brake drum is cracked, the parking brake lever will pull up excessively and the car may still be able to roll. However, a more common circumstance is parking brake maladjustment or seizure of parking brake components. Repair of those problems will often require removal of the brake drum.

How do mechanics replace brake drums?

There are two options when it comes to brake drum service: outright replacement or resurfacing. In some cases, it is cheaper to replace the drum rather than refurbish it. In both cases though, the removal and installation procedure for the drum is the same.

Raise the vehicle and safely support it using steel jack stands.
Remove tire and wheel assembly.
Remove brake drum. Sometimes the brake drum has rusted to the wheel hub and removal of the drum will require a brake drum puller. In some cases, the wheel hub is integral to the brake drum, in which case the hub-bearing retaining bolt and the wheel bearing must be removed to replace the drum.
Measure the interior diameter of the machined surface in the drum with a brake drum micrometer or similar measuring tool. If sufficient metal exists to resurface the drum on a brake lathe, the mechanic will compare the cost of such restoration to the alternative: buying a new drum.
Prior to installing the resurfaced or new drum, the brake shoes, springs, wheel cylinder, parking brake mechanism, and backing plate are all inspected. All worn parts should be replaced. Generally, if drums have been replaced or resurfaced, new brake shoes should be installed. The worn shoes will cause irregular wear in the brake drum and reduce braking effectiveness.
The shoes are adjusted and the drum is installed. The wheel and tire assembly are installed and torqued in the proper sequence and the car is road tested to check the operation of the brakes.

Is it safe to drive with a brake drum problem?

No. Should there be a deficiency with the brake drums, stopping distances will not be as short as possible. In a panic stop, stopping just five or ten feet shorter could be the difference between no collision and a collision. Any deficiency in a vehicle’s braking system is a cause for concern and a potential safety issue. Have the brake drums inspected at your earliest convenience to determine if a problem exists and find out what must be done to fix it.

When replacing brake drums keep in mind:

With few exceptions, brake work on one end of an axle should be performed on both ends of the axle. Should a brake drum on one end of a front or rear axle be serviced, or brake shoes on one end are serviced, both sides of the axle should receive the same service. This helps to avoid problems, such as pulling, vibration, and so forth, once the vehicle is returned for use.
Brake drum systems use very powerful springs to keep the brake shoes in position. These springs are exposed to extreme heat. It is best practice to replace all springs whenever new shoes are installed. Should a spring unexpectedly break in the brake drum assembly, a mispositioned brake shoe could cause the brakes to grab and lock, which would pose a safety issue.
If the wheel hub and bearing are integral to the brake drum on your car, the mechanic may recommend replacement of the grease in the wheel bearings and inspection of the wheel bearings.
Since the arc of the brake shoes will not perfectly match with the arc of the drum when new, expect a bed-in period before maximum braking efficiency is achieved.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(2,399)

Rating Summary

2,226

85

19

12

57

2,226

85

19

12

57

SEE REVIEWS NEAR ME

Roberto

12 years of experience

307 reviews

Request Roberto

Roberto

12 years of experience

Request Roberto

by Jacqueline

Audi A4 L4-2.0L Turbo - Water Pump (Auxiliary) - Houston, Texas

Mr. Roberto was amazing, it took him no time to re-diagnose my car issue. Me. Roberto is very professional and confident in what he does. I would recommend him to ALL my friends. Thank you again Mr. Roberto

Joshua

27 years of experience

709 reviews

Joshua

27 years of experience

by Jason

Audi A3 L4-2.0L Turbo Diesel - Battery - Emeryville, California

He was very informative and helpful. He showed up early the first day due to a cancelled appointment and right on time the second day.

Khoa

20 years of experience

402 reviews

Khoa

20 years of experience

by Dory

Audi A3 L4-1.8L Turbo - Oil Change - Redwood City, California

Once again Khoa was on time, efficient, and performed all repairs to my satisfaction. I plan to call him again next time I have car repair needs. Nice guy too!

Jacob

12 years of experience

329 reviews

Jacob

12 years of experience

by Stephen

Audi A4 L4-1.8L Turbo - Axle / CV Shaft Assembly Replacement (Passenger Side Front) - Frisco, Texas

WOW ! Amazing talent - Great attitude and a super cool person. He knows what he is doing and has all the tools with him to take care of the job. He is very detailed and explains what needs to be fixed and also areas of concern for future service. Really cares about taking care of the customer through communication, professional service, and an expert as a mechanic. I would recommend Jacob to all of my friends and family members that need a solid mechanic that really created a WOW experience for me!

Excellent Rating

(2,399)

Rating Summary

2,226

85

19

12

57

2,226

85

19

12

57

SEE REVIEWS NEAR ME

Recent articles & questions

5 Essential Things to Know About Front-Wheel Drive (FWD)

Many Many new (and old) vehicles have front-wheel drive (FWD). However, it helps to have a good understanding of exactly what that means before you make the decision on which car is the right one for you. Here, you’ll find...

How to Buy and Install a Booster Seat

Booster seats are important safety features for young children. When a child has outgrown their child restraint system, but is not yet big enough to safely fit the adult-sized lap and shoulder belts, it is time for them to use...

How to Install Aftermarket Springs

Switching Switching out your stock springs (https://www.yourmechanic.com/article/how-long-do-suspension-springs-last) for aftermarket springs can have a huge impact on your car. Whether you’re going for a sporty feeling, or even just a different look by lowering the car, new springs can make your...

Where on the website is the new option to make payment plans?

sent to CS.

I have a 2006 Dodge Caravan and it won't start or crank. The dashboard shows the engine and oil pressure lights.

Turn the key to the on position and look to see if the theft light comes on and then goes out after a couple seconds? If it stays on then you have a problem in the theft system or the...

2004 Acura TSX Temperature Gauge Rises To Near Hot in Idle

It is very possible that your electric cooling fans are beginning to fail. The electric cooling fans are intended to keep the engine cool while it is idling and at a stop. When the vehicle is being driven at higher...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com