Audi 80 Quattro Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(317)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(317)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Audi 80 Quattro Brake Pad Replacement is $180 with $85 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Audi 80 QuattroL5-2.3LService typeBrake Pads - Rear ReplacementEstimate$303.29Shop/Dealer Price$367.87 - $522.22
1988 Audi 80 QuattroL5-2.3LService typeBrake Pads - Front ReplacementEstimate$265.51Shop/Dealer Price$325.67 - $466.71
1992 Audi 80 QuattroL5-2.3LService typeBrake Pads - Rear ReplacementEstimate$283.29Shop/Dealer Price$347.90 - $502.27
1989 Audi 80 QuattroL5-2.3LService typeBrake Pads - Rear ReplacementEstimate$283.29Shop/Dealer Price$347.86 - $502.20
1990 Audi 80 QuattroL5-2.3LService typeBrake Pads - Front ReplacementEstimate$265.51Shop/Dealer Price$325.70 - $466.76
1992 Audi 80 QuattroL5-2.3LService typeBrake Pads - Front ReplacementEstimate$265.51Shop/Dealer Price$325.67 - $466.71
1991 Audi 80 QuattroL5-2.3LService typeBrake Pads - Rear ReplacementEstimate$288.29Shop/Dealer Price$352.66 - $506.85
1988 Audi 80 QuattroL5-2.3LService typeBrake Pads - Rear ReplacementEstimate$288.29Shop/Dealer Price$353.31 - $507.99
Show example Audi 80 Quattro Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(317)

Rating Summary
304
10
2
0
1
304
10
2
0
1

ALEX

23 years of experience
43 reviews
ALEX
23 years of experience
Audi S8 V8-4.0L Turbo - Brake Pads Replacement (Front, Rear) - San Jose, California
Outstanding mechanic, which turned out to more complicated than we both expected. He was the ultimate professional working through the problem and keeping me updated. It also turned out I had the wrong part (online company) had shipped incorrectly and he helped me resolve and worked to the new schedule.

Ostus

8 years of experience
70 reviews
Ostus
8 years of experience
Audi A6 V6-3.2L - Brake Pads Replacement (Front, Rear) - Atlanta, Georgia
Ostus "O" Stephen is one word....PHENOMENAL!!! He's an extremely smart person whom is knowledgeable and has a passion for what he does! That alone drives his quality of work and his outlook of the service he's to provide to the most important thing...HIS CUSTOMERS! This was the BEST decision I could've made and will definitely look forward to working with him in the future!

Carlos

21 years of experience
47 reviews
Carlos
21 years of experience
Audi A6 L4-2.0L Turbo - Brake Pads Replacement (Front) - Richmond, Texas
Carlos provided good service and was able to finish on time. I would have Carlos service my car again.

Chris

20 years of experience
448 reviews
Chris
20 years of experience
Audi A3 L4-2.0L Turbo - Brake Pads Replacement (Rear) - Portland, Oregon
It's a pleasure working with Chris who is always early or on time and provides 5 Star customer service.

Excellent Rating

(317)

Rating Summary
304
10
2
0
1
304
10
2
0
1
Number of Audi Brake Pad Replacement services completed
3487+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Mitsubishi Outlander
The The smaller size and aggressive styling make the 2012 Mitsubishi Outlander a great choice for those who want an SUV, but don’t want to deal with some of the large behemoths available. With numerous tech options and all-wheel drive...
P0580 OBD-II Trouble Code: Cruise control Multi-Function Input "A" Circuit Low
P0580 P0580 OBD-II Trouble Code: Cruise control Multi-Function Input "A" Circuit Low Diagnostic Trouble Code (DTC): P0580 P0580 code definition A P0580 code means that the PCM has found an electrical problem with the multi-function input circuit in the vehicle’s...
P2669 OBD-II Trouble Code: Actuator Supply Voltage B Circuit/Open
P2269 means that there is a computer output circuit issue due to the actuator supply voltage to the B circuit being open.

Window not closing

Hi there. A common cause of a window not going up is the window switch itself. Also a window that is off its track or a bad motor can cause this as well. A mechanic sent by YourMechanic can be...

Car overheating after new water pump

Hello. It sounds like you may have a couple of issues going on with your vehicle. The overheating is the first concern. If it is randomly overheating then a block test needs to be done. This would indicate a leak...

Radiator fan gets stuck sometimes.

This maybe a sign of a failing coolant fan switch (https://www.yourmechanic.com/services/thermo-coolant-fan-switch-replacement). As you may know the coolant fan switch helps to maintain the proper coolant temperature by turning on and off at specific temperature thresholds. When this switch is not...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com