Audi 100 Quattro Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a Audi 100 Quattro Intake Manifold Gaskets Replacement is $391 with $97 for parts and $294 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Audi 100 QuattroV6-2.8LService typeIntake Manifold Gaskets ReplacementEstimate$843.36Shop/Dealer Price$940.63 - $1182.81
1994 Audi 100 QuattroV6-2.8LService typeIntake Manifold Gaskets ReplacementEstimate$709.63Shop/Dealer Price$793.83 - $1026.22
1992 Audi 100 QuattroV6-2.8LService typeIntake Manifold Gaskets ReplacementEstimate$811.83Shop/Dealer Price$898.43 - $1132.61
1991 Audi 100 QuattroL5-2.3LService typeIntake Manifold Gaskets ReplacementEstimate$686.11Shop/Dealer Price$754.57 - $937.28
1990 Audi 100 QuattroL5-2.3LService typeIntake Manifold Gaskets ReplacementEstimate$686.11Shop/Dealer Price$762.57 - $951.27
Show example Audi 100 Quattro Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

Braxton

12 years of experience
205 reviews
Braxton
12 years of experience
Audi S4 V6-3.0L Turbo - Intake Manifold Gaskets - Clermont, Florida
I'll use Braxton for every service I need. He's awesome and knowledgeable and very thorough, which can be a hard quality to find these days.

Keven

8 years of experience
187 reviews
Keven
8 years of experience
Audi Q7 V6-3.6L - Intake Manifold Gaskets - Puyallup, Washington
Thanks for fixing that horrible whistling noise!

Jim

34 years of experience
225 reviews
Jim
34 years of experience
Audi Q7 V8-4.2L - Intake Manifold Gaskets - Danville, California
On time. Great communication. Very accommodating. Courteous, true professional. Excellent service. Thanks Jim!!

Dwight

33 years of experience
58 reviews
Dwight
33 years of experience
Audi A6 V6-3.2L - Intake Manifold Gaskets - Alpharetta, Georgia
Awesome job and very knowledgeable about repairs. Could not have has asked for better mechanic.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of Audi Intake Manifold Gaskets Replacement services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
800+
experts on our platform

Recent articles & questions

How to Troubleshoot a Power Moon Roof That Won't Open
Car moon roofs won't open if the tracks are clogged or the cables, electric motor, or moon roof switch is broken.
How to Know When to Replace Car Tires
Car tires get worn out after miles on the road. Inspect tires for damage and check tread depth with a coin to make sure car tires are in good shape.
Symptoms of a Bad or Failing Automatic Timing Advance Unit
If your car experiences engine knock, sluggish performance, or excessive black smoke, you may need to replace your automatic timing advance unit.

Honda Stunner CBF!25 is making a rattling noise from the engine

Hi there, Usually when you release the throttle on a four-cycle motorcycle engine and you hear a noise or see smoke from the exhaust it’s caused by cylinder head issues; usually the valve guides. This problem can get worse when...

Stop at stop sign, give it the gas, it want go, let up, push down agin it goes,the engine does not die.!!!!

What you are describing sounds like a dirty or failing idle air control valve. The idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) monitors the air intake as it is mixed with fuel prior to being injected into the engine at low speeds...

I have a power steering issue after doing a donut. The pump no longer assists at idle, only when the rpms are up. No leaks and fl

Hello, thank you for writing in. The power steering pump has likely failed. The pump gets its power from the drive belt, if it is tight, the power steering pump should be supplying plenty of hydraulic pressure at idle speeds....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com