Acura TSX Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(419)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(419)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Acura TSX Wheel Bearings Replacement is $214 with $74 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2012 Acura TSXL4-2.4LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$610.02Shop/Dealer Price$730.08 - $1076.07
2010 Acura TSXV6-3.5LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$601.01Shop/Dealer Price$717.97 - $1061.65
2006 Acura TSXL4-2.4LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$322.41Shop/Dealer Price$363.12 - $476.46
2011 Acura TSXL4-2.4LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$601.01Shop/Dealer Price$718.02 - $1061.72
2013 Acura TSXV6-3.5LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$601.01Shop/Dealer Price$720.59 - $1066.23
2007 Acura TSXL4-2.4LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$293.21Shop/Dealer Price$333.51 - $446.55
2014 Acura TSXL4-2.4LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$601.01Shop/Dealer Price$718.04 - $1061.77
2004 Acura TSXL4-2.4LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$293.21Shop/Dealer Price$333.27 - $446.12
Show example Acura TSX Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Acura mechanics

Real customer reviews from Acura owners like you.

Excellent Rating

(419)

Rating Summary
402
7
2
2
6
402
7
2
2
6

Larry

15 years of experience
23 reviews
Larry
15 years of experience
TSX 2009 - Oil Pressure Sensor - Dublin, OH
Overall the experience was great. He got held up a few minutes at his previous appointment but let me know ahead of time so I wasn't left wondering. Still made it only a few minutes late. He did the work within the 1 and 1/2 hour estimated time and so far the work seems great.

Michael

14 years of experience
11 reviews
Michael
14 years of experience
TSX 2004 - Steering Rack/Gearbox - Albuquerque, NM
Michael is an EXPERT at what he does!! I am very pleased with his level of service. Thank you Michael!

William

14 years of experience
95 reviews
William
14 years of experience
TSX 2004 - Serpentine/Drive Belt - Denver, CO
William was early and very knowledgeable about the repair. Thank you for your quick service.

Jason

0 years of experience
20 reviews
Jason
0 years of experience
TSX 2007 - Thermostat - Tampa, FL
Very easy to talk to, did a great job and gave advice.

Excellent Rating

(419)

Rating Summary
402
7
2
2
6
402
7
2
2
6
Number of Acura TSX services completed
4609+
services done by our mechanics
TOTAL NUMBER OF EXPERT Acura MECHANICS
1000+
experts on our platform

Recent articles & questions

How to Prepare for the Nebraska Driver’s Written Test
Being Being able to drive means freedom, and if you’ve been dreaming of the day that you could actually get behind the wheel, you know that the state of Nebraska requires a few things before you can actually drive. Namely,...
How Long Does a Water Pump Belt Last?
There There are a variety of components that make up the cooling system of a car. Most people fail to realize just how much heat their engine produces. Having the components of a car’s cooling system running at peak condition...
How to Prepare for the South Dakota Driver’s Written Test
You You can’t get your license in South Dakota without first passing your driver’s written test and then taking the road test. When it comes to the written test, many people feel that it is going to be difficult and...

Rough idling and lacking horse power - 1982 Mercedes Benz 380SL

Hello. There could be a problem with the coolant temperature sensor (https://www.yourmechanic.com/services/coolant-temperature-switch-sensor-replacement). I would also suspect that there could be a problem with the ignition control unit. The fuel pump (https://www.yourmechanic.com/services/fuel-pump-replacement) could also be contributing to the problem you are...

Brake lights not working fuse OK bulbs OK new Switch still not working

Hello, thank you for writing in. If you know that the brake bulbs, relay, and switch are good then you have an issue with the wiring or the ground connection. The body control module also plays a role in how...

Bought used 11 Nissan Sentra. VDC lite is coming on and the car is jumping repeatedly upon acceleration. Only hapns somtimes

Hi Ashlea. The Vehicle Dynamic Control (VDC) Warning Light is located on the instrument panel. When this light illuminates, there is an issue with the VDC system, and the system will turn off. You can still drive your vehicle, but...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com