Acura Legend Ignition Cable (Spark plug wires) Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(45)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(45)

Ignition Cable (Spark plug wires) Replacement Service

How much does a Ignition Cable (Spark plug wires) Replacement cost?

On average, the cost for a Acura Legend Ignition Cable (Spark plug wires) Replacement is $208 with $68 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Acura LegendV6-2.7LService typeIgnition Cable (Spark plug wires) ReplacementEstimate$290.26Shop/Dealer Price$330.38 - $436.55
Show example Acura Legend Ignition Cable (Spark plug wires) Replacement prices

What is the Ignition Cable (Spark plug wires) all about?

The ignition cables, also known as “spark plug wires” are part of the ignition system. They transfer the spark from the distributor or ignition coil to spark plugs that ignite the air-fuel mixture, starting the engine.

Over time, the cables can get weak and break down. This will make it harder for the spark to reach the engine cylinders, resulting in engine misfires. The car may not start at all. If one of the spark plugs has gone bad, the car will still start and run, but it will run poorly.

Keep in mind:

  • Ignition cable failure is often caused by other failing pieces in the ignition system; a mechanic should check for any other malfunctioning parts, and replace any parts of the system that don’t work.
  • Every time the ignition cables are replaced, the spark plugs should be inspected.
  • Leaking oil or coolant can cause ignition wire failure. If this is the case, the cause of the leak should be repaired or replaced, or else the new ignition wires will quickly be damaged as well.

How it's done:

  • Scan the computer system in the car for codes.
  • Inspect ignition cables (look for white spots).
  • Ohm test on individual cables.
  • Remove and replace the cables if found faulty.
  • Inspect the spark plugs.
  • Clear the codes.

Our recommendation:

Ignition wires should be replaced at least every 60,000 miles, but whenever your car is serviced, it’s a good idea to have the entire ignition system inspected. Any time that you have spark plugs replaced, it’s a good idea to have the ignition wires replaced as well. If you notice that your engine is running poorly, you should schedule an inspection.

What common symptoms indicate you may need to replace the Ignition Cable (Spark plug wires)?

  • Check Engine light is on.
  • Engine misfires.
  • Poor gas mileage.
  • Engine may shake (light vibration).

How important is this service?

The fuel in your automobile is ignited by a spark. This starts with the ignition coil, which transforms low voltage power into extremely high voltage. This high voltage is transferred through the ignition cables, and to the spark plug, where a spark is created that ignites the engine’s fuel, and powers the engine.

When one or more ignition cables fail, this voltage will not be transferred from the ignition coil to the spark plugs, and the fuel will not be ignited. Depending on how many of your ignition cables malfunction, your car will either run poorly, or won’t run at all.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Acura mechanics

Real customer reviews from Acura owners like you.

Excellent Rating

(45)

Rating Summary
41
2
1
0
1
41
2
1
0
1

Matt

36 years of experience
19 reviews
Matt
36 years of experience
Acura Legend V6-2.7L - Oil/Fluid Leak - Los Gatos, California

Trevor

24 years of experience
11 reviews
Trevor
24 years of experience
Acura Legend V6-3.2L - Battery - San Jose, California
Trevor arrived at my home on time. Wow, I've never had anyone arrive on time for anything. He found the problem, and explained in detailed what he would need to do to solve the problem. He went and picked up the part, and the car is now fully operational. Also, it was not as expensive as I thought it would be. Oh yeah, I also saved on towing cost.

Ben

42 years of experience
1589 reviews
Ben
42 years of experience
Acura Legend V6-2.7L - Oil or Fluid is leaking - Houston, Texas
Tried get vehicle on road even though he not have part to fix issue

Joshua

28 years of experience
709 reviews
Joshua
28 years of experience
Acura Legend V6-3.2L - Brake Warning Light is on Inspection - San Pablo, California
A great guy on time and gets the job done.

Excellent Rating

(45)

Rating Summary
41
2
1
0
1
41
2
1
0
1
Number of Acura Legend services completed
495+
services done by our mechanics
TOTAL NUMBER OF EXPERT Acura MECHANICS
1000+
experts on our platform

Recent articles & questions

What is Engine Coolant or Antifreeze?
A A combustion engine works by burning a mixture of fuel and oxygen at temperatures over 200 degrees. Complete this process more than 2,000 times per minute, and you’ll understand how an engine can develop a lot of heat, and...
How to Buy a Good Quality Distributor Rotor and Cap
When When your distributor cap or rotor goes bad you could be left stranded and unable to start your vehicle. The rotor is a whirling dervish of power distribution, transferring energy from the ignition coil, through the distributor cap, and...
How to Register a Car in New York
For For some, moving to New York is a lifelong dream that they will stop at nothing to achieve. While moving to the Big Apple is exciting, there are a number of things that you will need to do. The...

No pressure to accelerator.

It sounds like there is an issue with your accelerator cable. It is possible that it may be broken or has come detached from the throttle of your engine. I would recommend that you enlist the help of a certified...

My car overheated and then eventually died. Now it wont crank and I have coolant all over my engine

Based on your description the engine was overheating and the overheating was accompanied by a large coolant leak (https://www.yourmechanic.com/services/coolant-is-leaking-inspection). Please note that coolant leaks can be either a cause or a CONSEQUENCE of overheating. Therefore, once the leak is repaired,...

PO300 and PO420 and rough idle and RPM fluctuation

Claimed by Kevin Gainer

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com