Acura ILX Transfer case fluid is dirty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(47)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(47)

Transfer case fluid is dirty Inspection Service

How much does a Transfer case fluid is dirty Inspection cost?

On average, the cost for a Acura ILX Transfer case fluid is dirty Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Acura ILXL4-1.5L HybridService typeTransfer case fluid is dirty InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2015 Acura ILXL4-2.4LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2015 Acura ILXL4-2.0LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2014 Acura ILXL4-2.0LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
2013 Acura ILXL4-2.0LService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
2013 Acura ILXL4-1.5L HybridService typeTransfer case fluid is dirty InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2020 Acura ILXL4-2.4LService typeTransfer case fluid is dirty InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2022 Acura ILXL4-2.4LService typeTransfer case fluid is dirty InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Acura ILX Transfer case fluid is dirty Inspection prices

A transfer case is unique to all-wheel drive and four-wheel drive vehicles, sending power from the engine to the rear wheels. The transfer case is a sealed unit and may be either gear-driven or chain-driven depending on the manufacturer. Because the transfer case is a sealed unit, it requires lubrication to keep all of the moving parts clean and at a reasonable temperature. Transfer case fluid ensures the longevity of parts in the transfer case.

How this system works:

In four-wheel drive and all-wheel drive vehicles, a transfer case is either connected directly to the back of the transmission, or by a small driveshaft further back in the vehicle. When activated, the transfer case takes power from the engine to the back wheels. Depending on the kind of vehicle, power may go to the rear wheels on a full-time or part-time basis. All-wheel drive systems are typically on all of the time while a four-wheel drive system are activated by either pressing a button in the vehicle or by manipulating a selector lever, typically located near the transmission hump on the floor. In both systems, transfer case fluid keeps the internal parts of the transfer case lubricated. Over time, transfer case fluid will become dirty and break down. When transfer case fluid breaks down you may notice shuddering from the vehicle while turning or a whining noise from the gears in the transfer case.

Common reasons for this to happen:

  • Time: Over time, transfer case fluid will break down and become dirty. Dirty transfer case fluid may cause moving parts in the transfer case to have more difficulty moving, which may cause them to fail.

  • Improper Filling: If the transfer case is not properly filled with transfer case fluid, it may break down more quickly, have difficulty dissipating heat, and keeping parts lubricated.

What to expect:

A top-rated mobile mechanic will come to your home or office and determine whether or not your transfer case fluid needs to be replaced. If it does, he or she will then provide a detailed inspection report outlining the reason the fluid needed to be replaced and the cost of any repairs that may need to be made.

How it's done:

A mechanic will first have your vehicle idle for a few minutes to warm the fluid as warm fluid will drain easier. The mechanic will then drain the old transfer case fluid through the drain plug. The drain plug on most transfer cases is magnetic and picks up metal shavings that otherwise might potentially damage components in the transfer case. The mechanic should clean the drain plug before replacing it. The mechanic will then remove the fill plug and add new fluid. The mechanic should also double-check the amount of fluid, he or she puts in the transfer case, ensuring that it was done properly. A vehicle that is under-lubricated may not dissipate heat or protect critical components as well as a vehicle that is properly lubricated. When the transfer case is full, the mechanic will replace the fill plug and check for any leaks.

How important is this service?

By choosing to not replace your transfer case fluid, you may compromise critical and expensive components inside the transfer case. Because the transfer case is a sealed unit, it is very important that the transfer fluid is filled properly so that heat is appropriately dissipated and components to not suffer from unneeded friction. Repairing a differential can be very expensive, so in order to preserve these components, you should have you transfer case fluid replaced at the correct intervals. Doing so could potentially save you a lot of money down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Acura mechanics

Real customer reviews from Acura owners like you.

Excellent Rating

(47)

Rating Summary
47
0
0
0
0
47
0
0
0
0

Willie

24 years of experience
116 reviews
Willie
24 years of experience
Acura ILX L4-2.0L - Spark Plugs - Long Beach, California
It was great!! He let me know everything I needed to know to maintain my car. Very friendly and courteous!

Anderson

27 years of experience
91 reviews
Anderson
27 years of experience
Acura ILX L4-2.0L - Brake Caliper Replacement (Driver Side Front, Passenger Side Front) - Brooklyn, New York
Arrived on time very nice guy and was knowledgeable of the job ,parts,etc and finished a 3hr In 2hr, highly recommend him.

Mark

24 years of experience
116 reviews
Mark
24 years of experience
Acura ILX L4-2.4L - Brake Pads Replacement (Front, Rear) - Glen Ellyn, Illinois
He’s very honest about what the car needed. He was very timely and professional. I would book him again!

Andrew

26 years of experience
35 reviews
Andrew
26 years of experience
Acura ILX L4-2.0L - Brake Pads Replacement (Rear) - Las Vegas, Nevada
Friendly and efficient service.

Excellent Rating

(47)

Rating Summary
47
0
0
0
0
47
0
0
0
0
Number of Acura ILX services completed
517+
services done by our mechanics
TOTAL NUMBER OF EXPERT Acura MECHANICS
1000+
experts on our platform

Recent articles & questions

Common Signs Your Drive Belt Is Misaligned
Drive Drive belt problems usually manifest as noise. If you have a noisy drive belt, it’s important to know what’s causing it so that it can be fixed. That means you have to listen. If the drive belt or serpentine...
Child Seat Safety Laws in Georgia
In In Georgia, seat belt and child restraint laws are in place for your safety and protection. These laws are founded in common sense, and reasonable adults obey seat belt laws, and also understand that they are under a duty...
How to Increase the Resale Value of Your Vehicle
When you sell your car you want to make extra money on the sale. Keep your car's resale value high by keeping your car clean and well maintained.

many powertrain cylinder misfire error codes!!!!!

Hi there. From the description you have given, there are multiple concern that require diagnoses. Most importantly are why the engine has misfires and cooling fans inoperative. The misfiring cylinders (https://www.yourmechanic.com/services/engine-is-misfiring-inspection) and exhaust smoke could be caused by a head...

What value should the MAF signal be at idle?

Here is a breakdown of the wiring color codes, and the associated voltages on each, for engine running and ignition on. The signal from the mass airflow sensor should steadily sweep from 1.9 to 5 volts as you press and...

Check engine light came on, stayed 2-3 days, then went off.

If the check engine light is off, the engine operating temperature is fully within the normal range (not too cold and not too hot) and there are no outward signs of engine malfunction, you need do nothing at this time....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com