Volvo S80 Power Steering Pump Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Volvo S80 Power Steering Pump Replacement is $431 with $263 for parts and $168 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2012 Volvo S80L6-3.2L	Service typePower Steering Pump Replacement	Estimate$1572.86	Shop/Dealer Price$1892.26 - $2833.45
2014 Volvo S80L6-3.0L Turbo	Service typePower Steering Pump Replacement	Estimate$1553.94	Shop/Dealer Price$1869.63 - $2808.04
2015 Volvo S80L6-3.0L Turbo	Service typePower Steering Pump Replacement	Estimate$1553.94	Shop/Dealer Price$1869.68 - $2808.13
2011 Volvo S80L6-3.0L Turbo	Service typePower Steering Pump Replacement	Estimate$1518.02	Shop/Dealer Price$1824.78 - $2736.29
2005 Volvo S80L5-2.5L Turbo	Service typePower Steering Pump Replacement	Estimate$1060.89	Shop/Dealer Price$1286.31 - $1953.58
2010 Volvo S80L6-3.0L Turbo	Service typePower Steering Pump Replacement	Estimate$1085.02	Shop/Dealer Price$1283.83 - $1870.80
2014 Volvo S80L6-3.2L	Service typePower Steering Pump Replacement	Estimate$1553.94	Shop/Dealer Price$1869.71 - $2808.18
2010 Volvo S80L6-3.2L	Service typePower Steering Pump Replacement	Estimate$1085.02	Shop/Dealer Price$1283.53 - $1870.29

Show example Volvo S80 Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
The threaded connectors to the pump inlet and outlet are loosened and removed.
Any mounting bolts and brackets are removed so the pump can be removed.
If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(129)

Rating Summary

121

5

1

0

2

121

5

1

0

2

SEE REVIEWS NEAR ME

Joshua

6 years of experience

35 reviews

Joshua

6 years of experience

by Karen Jones

S80 2007 - Alternator - Aubrey, TX

Very prompt and explained every thi ng I'll use this service again for sure

Joshua

6 years of experience

35 reviews

Joshua

6 years of experience

by Karen Jones

S80 2007 - Intake Manifold Gaskets - Aubrey, TX

Very prompt and explained every thi ng I'll use this service again for sure

Maurice

20 years of experience

39 reviews

Request Maurice

Maurice

20 years of experience

Request Maurice

by Tykenia Ford

S80 2008 - Noise from engine or exhaust - Charleston, SC

He came on time but got the job done and told me what was wrong so I can appreciate that he was a big help

Manuel

6 years of experience

3 reviews

Manuel

6 years of experience

by Josh Morgan

S80 1999 - Spark Plugs - San Diego, CA

Changed all my spark plugs and an ignition coil quickly and efficiently.

Excellent Rating

(129)

Rating Summary

121

5

1

0

2

121

5

1

0

2

SEE REVIEWS NEAR ME

Recent articles & questions

Industry News for Automotive Techs: November 5 - November 11

Tesla buys Grohmann Engineering, Ferrari's future hybrids, next-gen Dodge Charger and Challenger, Nissan e-Power system, and YourMechanic recognition.

Does the Exhaust System Reduce Harmful Pollutants?

Because Because your car’s engine operates on combustion (burning gasoline), it creates fumes. Those fumes must be removed from the engine so they don’t smother combustion, and must be vented as far from the doors and windows as possible because...

How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in Delaware

Automotive technician jobs include mobile vehicle inspectors. Learn how to do car checks in Delaware, which are all completed by the state's DMV.

Break light and abs light on

Hi There, It sounds like you may have two separate issues going on here. The ABS control module (https://www.yourmechanic.com/services/abs-light-is-on-inspection) controls the activation of the ABS system based upon inputs from the ABS wheel sensors. When this module is not working...

can find my key so I tried to start car with my spare and it wont start. Everything in the green all systems work.

Hello, we will be happy to help you out. If you are sure that that spare key has worked in the ignition before then it should work now. Though some keys will lose programming if they sit for long periods...

I pluged a malfun.Fm modulator in cigarete lighter,and somehow it went in and trying to remove i saw a spark and dont work anymore

Hi Emil. Thanks for contacting us today. I'm a bit confused by your question. if the FM modulator is not working now after the spark issue, then it's likely that the short circuit has damaged electrical components inside that system....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com