Volvo 240 Brake Light Switch Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(14)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(14)

Brake Light Switch Replacement Service

How much does a Brake Light Switch Replacement cost?

On average, the cost for a Volvo 240 Brake Light Switch Replacement is $170 with $30 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Volvo 240L4-2.3LService typeBrake Light Switch ReplacementEstimate$214.14Shop/Dealer Price$232.53 - $279.58
1992 Volvo 240L4-2.3LService typeBrake Light Switch ReplacementEstimate$205.13Shop/Dealer Price$221.75 - $267.48
1990 Volvo 240L4-2.3LService typeBrake Light Switch ReplacementEstimate$205.13Shop/Dealer Price$221.77 - $267.52
1993 Volvo 240L4-2.3LService typeBrake Light Switch ReplacementEstimate$205.13Shop/Dealer Price$221.77 - $267.52
Show example Volvo 240 Brake Light Switch Replacement prices

What is the brake light switch and how does it work?

The brake light switch is a mechanical switch activated when you press the brake pedal. The switch has a plunger in it that contacts a lever in the brake pedal assembly. As that plunger is depressed when you push on the brake pedal, the contacts in the brake light switch closed and voltage flows to the brake lights — turning them on. The brake light switch is also in the circuit that controls the cruise control disengagement and the shift interlock safety feature installed on all newer cars. Failure of the brake light switch occurs due to wear on the internal electrical contacts in the switch, poor switch terminal connections, maladjustment of the switch, or damage to the brake pedal assembly.

When to consider replacing the brake light switch?

  • No brake lights. If depressing the brake pedal does not cause any of the brake lights to illuminate, the continuity of the switch will be tested. If only one brake light is out, then the issue is not the switch but rather the bulb, bulb socket or brake light circuit integrity.
  • Unable to shift out of park. The brake light switch is also wired into the shift interlock mechanism. If you are unable to shift out of park, with your foot on the brake, check to see if the brake lights will illuminate as you push the pedal. If they do not illuminate, failure of the brake light switch may be the cause of the no shift.
  • Intermittent operation of the brake lights or late operation. The brake light switch has to be in the proper position, and work consistently if the brake lights are to come on the instant you press the brake pedal. The switch can sometimes require adjustment, or the contacts may degrade, causing inconsistent operation of the switch.

How do mechanics replace the brake light switch?

  • The switch is first tested using a multimeter, including the terminal contacts to the switch, to determine if it is faulty. If the switch is functioning, the entire circuit must be tested to determine the cause of no brake lights.
  • Should the switch be judged defective, the switch is unthreaded from the mounting boss near the brake pedal assembly.
  • The new switch is threaded in and locked with an appropriate locknut once the new switch is properly adjusted.
  • The operation of the switch is tested to ensure instant illumination of the brake lights upon pressing the brake pedal.

Is it safe to drive with a brake light switch problem?

No. Should the brake light switch have failed, it is unsafe to drive the vehicle because drivers behind you will have no indication that you are slowing, intend to slow, or are stopped. Always address a failure of this type promptly to ensure your safety while driving.

When replacing the brake light switch keep in mind:

  • The mechanic will test the brake light switch directly to ensure that the issue is not elsewhere in the brake light circuit.
  • Occasionally, the issue is a maladjusted switch or a loose contact, and the mechanic can resolve the problem without switch replacement.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(14)

Rating Summary
14
0
0
0
0
14
0
0
0
0

Excellent Rating

(14)

Rating Summary
14
0
0
0
0
14
0
0
0
0
Number of Volvo 240 services completed
154+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

How to Deal With Car Payments You Can’t Pay
Setbacks in life are inevitable, but how you deal with challenges like a lost job or sudden costly repair are how you establish your character. Whether it is a one-time occurrence or potentially a long-term issue, if you find yourself...
P0546 OBD-II Trouble Code: Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 1
P0546 code means that the malfunction is related to the exhaust gas temperature sensor circuit due to loose terminals, wiring issues, or faulty sensor
California Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of California. Speed limits in California California has a very different way of setting its speed limits than most...

VTEC not engaging.

Hi there, The Honda VTEC system relies on two main electrical components to function properly. One of these components is the VTEC oil pressure switch which tells the engine computer that the oil pressure is sufficient for VTEC operation. The...

Rom is running high in my truck

Hello. This is a sign of a vacuum leak. A vacuum leak (https://www.yourmechanic.com/article/is-it-safe-to-drive-with-a-vacuum-leak) can be one of the most frustrating and difficult problems to diagnose. Idle speed that is way too fast is one of the common signs and stalling...

My clutch is hard to push down and when I do it squiles and vibrates so I was just w oundering what that could be

The most common for the clutch to be hard to push and is real noisey is going to be a broken clutch pressure plate. You will need to replace the clutch assembly to fix the problem.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com