Volkswagen EuroVan Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(50)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(50)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Volkswagen EuroVan Wheel Bearings Replacement is $281 with $71 for parts and $210 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 Volkswagen EuroVanV6-2.8LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$530.06Shop/Dealer Price$609.85 - $837.07
2002 Volkswagen EuroVanV6-2.8LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$516.55Shop/Dealer Price$593.69 - $818.92
2000 Volkswagen EuroVanV6-2.8LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$516.55Shop/Dealer Price$593.72 - $818.99
1997 Volkswagen EuroVanV6-2.8LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$516.55Shop/Dealer Price$593.72 - $818.98
1997 Volkswagen EuroVanL5-2.4L DieselService typeWheel Bearings - Driver Side Rear ReplacementEstimate$361.07Shop/Dealer Price$401.58 - $511.89
1992 Volkswagen EuroVanL5-2.5LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$361.07Shop/Dealer Price$399.58 - $508.39
2000 Volkswagen EuroVanV6-2.8LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$516.55Shop/Dealer Price$593.75 - $819.02
1993 Volkswagen EuroVanL5-2.4L DieselService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$361.07Shop/Dealer Price$399.37 - $508.02
Show example Volkswagen EuroVan Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volkswagen mechanics

Real customer reviews from Volkswagen owners like you.

Excellent Rating

(50)

Rating Summary
44
2
0
1
3
44
2
0
1
3

Tagharchi

24 years of experience
81 reviews
Tagharchi
24 years of experience
Volkswagen EuroVan V6-2.8L - Door will not open - Vista, California
Great mechanic. Honest and awesome to work with. Goes above and beyond.

Lavell

29 years of experience
405 reviews
Lavell
29 years of experience
Volkswagen EuroVan V6-2.8L - Car is not starting - San Francisco, California
Lavell is so patient and gracious and knowledgeable. He was right on time, and worked with me as I struggled to get my garage door to open. I especially love how direct and up front he is. He very quickly diagnosed my two cars and gave me a very clear idea of what he recommended be done next, and how much it would cost.

Raymond

38 years of experience
613 reviews
Raymond
38 years of experience
Volkswagen EuroVan V6-2.8L - Coolant Temperature Switch (Sensor) - Indian Springs, Nevada
I am running out words to explain how great Raymond is. Excellent knowledge, experience and professionalism. He always does his very best for the work he performs and he has a wonderful personality. I will definitely be calling on him in the near future.

Mazyar

20 years of experience
587 reviews
Mazyar
20 years of experience
Volkswagen EuroVan V6-2.8L - Starter - Morrow, Georgia
Although the van did not start he did a good job and he came to do I thank you for that

Excellent Rating

(50)

Rating Summary
44
2
0
1
3
44
2
0
1
3
Number of Volkswagen EuroVan services completed
550+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volkswagen MECHANICS
1000+
experts on our platform

Recent articles & questions

The Traveler’s Guide to Driving in Malaysia
CraigBurrows / Shutterstock.com Malaysia is a popular destination for many tourists today. The country has amazing sights and attractions (https://www.tripadvisor.com/Attractions-g293951-Activities-Malaysia.html) that you will want to explore. You may want to check out the Ethnology Museum, or the...
How to Replace Tie Rod Ends
The The tie rods are just one of many components in your steering system. The steering system consists of a steering wheel, steering column, a steering gear, tie rods and of course the wheels. In short, tie rods (https://www.yourmechanic.com/parts/tie-rod-end) are...
P2251 OBD-II Trouble Code: O2 Sensor Negative Current Control Circuit/Open Bank 1 Sensor 1
P2251 P2251 code definition O2 Sensor Negative Current Control Circuit/Open Bank 1 Sensor 1 What the P2251 code means P2251 is an OBD-II generic code. The engine control module (ECM) monitors the negative current control of the O2 sensor heater...

Car won't crank unless I pull the ASCD relay

The ASCD relay is for the cruise control only and should not cause the vehicle to not crank in any way. You may need to have the relay box checked to see if you have corrosion in the connections. If...

Its like my front wheels locked and wont go forward it will reverse but hear a grinding1994 Honda Accord LX

Hi there - you have listed some of the possible causes. Check transmission fluid first - easiest, and least expensive to fix. Low fluid would definitely cause lack of motion (https://www.yourmechanic.com/question/will-go-in-reverse-not-forward-what-are-the-choices-i-have-by-julian-a) issues. The grinding noise you mention is not a...

Need to know which transmission I have in my vehicle.

Your vehicle has a A518/46RE type of transmission for the year of 2000. This model fits from the vehicle years of 1998 through 2002.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com