Volkswagen CC Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(248)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(248)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Volkswagen CC Power Steering Pump Replacement is $670 with $362 for parts and $308 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Volkswagen CCL4-2.0L TurboService typePower Steering Pump ReplacementEstimate$1338.54Shop/Dealer Price$1595.85 - $2349.94
2014 Volkswagen CCV6-3.6LService typePower Steering Pump ReplacementEstimate$1121.48Shop/Dealer Price$1325.59 - $1928.84
2010 Volkswagen CCV6-3.6LService typePower Steering Pump ReplacementEstimate$1045.56Shop/Dealer Price$1230.74 - $1777.10
2009 Volkswagen CCL4-2.0L TurboService typePower Steering Pump ReplacementEstimate$1242.80Shop/Dealer Price$1477.29 - $2171.57
2017 Volkswagen CCV6-3.6LService typePower Steering Pump ReplacementEstimate$1121.48Shop/Dealer Price$1328.88 - $1934.60
2016 Volkswagen CCV6-3.6LService typePower Steering Pump ReplacementEstimate$1121.48Shop/Dealer Price$1325.95 - $1929.47
2017 Volkswagen CCL4-2.0L TurboService typePower Steering Pump ReplacementEstimate$1318.72Shop/Dealer Price$1572.22 - $2323.47
2009 Volkswagen CCV6-3.6LService typePower Steering Pump ReplacementEstimate$1045.56Shop/Dealer Price$1230.74 - $1777.09
Show example Volkswagen CC Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volkswagen mechanics

Real customer reviews from Volkswagen owners like you.

Excellent Rating

(248)

Rating Summary
230
6
1
4
7
230
6
1
4
7

Efrain

21 years of experience
101 reviews
Efrain
21 years of experience
Volkswagen CC L4-2.0L Turbo - Brake Rotor/Disc Replacement (Front) - Hyattsville, Maryland
Very knowledgeable and courteous, works fast and efficient. Excellent manners & great person all around.

Sebastian

6 years of experience
254 reviews
Sebastian
6 years of experience
Volkswagen CC L4-2.0L Turbo - Coolant is leaking - Lake Worth, Florida
He was very thorough and knowledgeable. Thanks!

Joseph

28 years of experience
578 reviews
Joseph
28 years of experience
Volkswagen CC L4-2.0L Turbo - Alternator - Sugar Land, Texas
Joseph arrived on time and took care of the repair in quick time. 5 days of driving after repair with no issue. Driveway was left neat and tidy. Thank you for a nice job.

William

23 years of experience
33 reviews
William
23 years of experience
Volkswagen CC L4-2.0L Turbo - Headlight Bulb Replacement (Passenger Side Low Beam) - Atlanta, Georgia
Great experience with William! Would highly recommend.

Excellent Rating

(248)

Rating Summary
230
6
1
4
7
230
6
1
4
7
Number of Volkswagen CC services completed
2728+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volkswagen MECHANICS
1000+
experts on our platform

Recent articles & questions

P0287 OBD-II Trouble Code: Cylinder 9 Contribution/Balance Fault
P0287 P0287 code definition A P0287 Trouble Code indicates cylinder 9 contribution/balance fault. What the P0287 code means In the event of a P0287 code appearing and storing in the vehicle, it means that there is an abnormal reading in...
2012 Jeep Patriot vs. 2012 Honda CR-V: Which One Should I Buy?
The mid-size SUV is a great vehicle for getting a lot of people from one place to another, with a decent price point and pretty good ongoing fuel economy. While they are never going to get the amazing gas mileage...
How Long Does an Exhaust Manifold Gasket Last?
Your Your exhaust manifold requires a seal between the cylinder head and the exhaust manifold. This seal is called the exhaust manifold gasket, and is an incredibly hard-working part. The exhaust manifold is where all the engine cylinders’ burned gasses...

ABS and brake light are on.

Anytime the red brake light comes on it means one of two things: a fault in the hydraulic system or a problem with the parking brake. Being that the abs light is on also that would suggest codes for the...

Fuel pump noise

A loud fuel pump often indicates either excessive cavitation, or mechanical failure is eminent. Either of these issues will lead to fuel starvation and drivability issues. My recommendation is to have a mechanic, such as one from YourMechanic, replace the...

The starter fuse that's up under the hood is broken Inside the Box a 2004 Nissan exterior I cannot get it out

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com