Volkswagen Beetle Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(49)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(49)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Volkswagen Beetle Car Battery Replacement is $306 with $166 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2001 Volkswagen BeetleL4-2.0LService typeCar Battery ReplacementEstimate$680.38Shop/Dealer Price$815.33 - $1212.06
2000 Volkswagen BeetleL4-1.9L Turbo DieselService typeCar Battery ReplacementEstimate$650.19Shop/Dealer Price$778.07 - $1157.60
2008 Volkswagen BeetleL5-2.5LService typeCar Battery ReplacementEstimate$671.37Shop/Dealer Price$804.57 - $1200.00
2002 Volkswagen BeetleL4-2.0LService typeCar Battery ReplacementEstimate$671.37Shop/Dealer Price$804.57 - $1200.00
2000 Volkswagen BeetleL4-2.0LService typeCar Battery ReplacementEstimate$671.37Shop/Dealer Price$806.05 - $1202.58
1998 Volkswagen BeetleL4-2.0LService typeCar Battery ReplacementEstimate$671.37Shop/Dealer Price$804.71 - $1200.25
2010 Volkswagen BeetleL5-2.5LService typeCar Battery ReplacementEstimate$671.37Shop/Dealer Price$804.59 - $1200.03
1999 Volkswagen BeetleL4-2.0LService typeCar Battery ReplacementEstimate$671.37Shop/Dealer Price$804.57 - $1200.00
Show example Volkswagen Beetle Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volkswagen mechanics

Real customer reviews from Volkswagen owners like you.

Excellent Rating

(49)

Rating Summary
46
2
0
0
1
46
2
0
0
1

Robert

15 years of experience
49 reviews
Robert
15 years of experience
Beetle 2010 - Battery - Concord, CA
This was perhaps the best experience I could have hoped for- very warm, friendly and knowledgeable. Flexible with getting me scheduled and overall really happy with the job!

Andrew

5 years of experience
865 reviews
Andrew
5 years of experience
Beetle 2003 - Battery - Kansas City, MO
Andrew was very friendly and timely. He notified me when he was in his way and when he got here. I'm very satisfied!

Johnathan

5 years of experience
41 reviews
Johnathan
5 years of experience
Beetle 2007 - Pre-purchase Car Inspection - Saint Louis, MO
He was very attentive, personable, and professional.

Jesus

6 years of experience
17 reviews
Jesus
6 years of experience
Beetle 2006 - Car is not starting - San Diego, CA
Great and quick service! Jesus was really friendly, explained everything as he did it!

Excellent Rating

(49)

Rating Summary
46
2
0
0
1
46
2
0
0
1
Number of Volkswagen Beetle Car Battery Replacement services completed
539+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volkswagen MECHANICS
1000+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Wheel Stud
Common signs include damaged threads on the wheel stud due to improper installation of the lug nuts onto the stud and rust on the wheel stud.
Symptoms of a Bad or Failing Serpentine/Drive Belt
Common signs include a squealing noise from the front of the vehicle, power steering and AC not working, engine overheating, and cracks on the belt.
P0779 OBD-II Trouble Code: Pressure Control Solenoid B Intermittent
P0779 means that the Pressure Control Solenoid B, is receiving intermittent voltage signals due to low or dirty fluid, faulty solenoid, or module.

Whining noise, fuel system issue

Hello. You should stop driving the car until this is addressed. You didn't specify where fuel was squirting out, but in any case, this is a serious safety hazard. Given the age of your vehicle, and that it as been...

Ambient air temperature sensor location

Hi there: Without knowing the exact make, year and model of your GMC it's hard to pinpoint the exact location of the ambient air temperature sensor. However, on most GMC pickups, it's located behind the front bumper, on the passenger...

How to remove a stripped lug

In order to get lug nuts that have stripped out you will need to have the lug nut removed by using special stripped lug nut socket. The socket has special locking knobs inside that will grip onto the stripped nut...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com