Scion tC Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Scion tC Car Thermostat Replacement is $229 with $89 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2010 Scion tCL4-2.4LService typeCar Thermostat ReplacementEstimate$338.06Shop/Dealer Price$387.43 - $527.42
2015 Scion tCL4-2.5LService typeCar Thermostat ReplacementEstimate$381.71Shop/Dealer Price$428.60 - $563.52
2012 Scion tCL4-2.5LService typeCar Thermostat ReplacementEstimate$387.45Shop/Dealer Price$435.81 - $575.06
2006 Scion tCL4-2.4LService typeCar Thermostat ReplacementEstimate$329.05Shop/Dealer Price$376.67 - $515.36
2011 Scion tCL4-2.5LService typeCar Thermostat ReplacementEstimate$387.45Shop/Dealer Price$437.87 - $578.67
2008 Scion tCL4-2.4LService typeCar Thermostat ReplacementEstimate$329.05Shop/Dealer Price$376.81 - $515.61
2009 Scion tCL4-2.4LService typeCar Thermostat ReplacementEstimate$329.05Shop/Dealer Price$376.69 - $515.39
2005 Scion tCL4-2.4LService typeCar Thermostat ReplacementEstimate$329.05Shop/Dealer Price$376.67 - $515.36
Show example Scion tC Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Scion mechanics

Real customer reviews from Scion owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Scion tC Car Thermostat Replacement services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Scion MECHANICS
500+
experts on our platform

Recent articles & questions

How to Improve Automatic Transmission Performance and Reliability
The transmission on automatic cars is improved by changing driving habits, maintaining engine performance, and replacing transmission oil and filter.
How to Buy a Good Quality Engine Mount
Engine Engine mounts, also called motor mounts, are crucial to your vehicle’s proper functioning; providing a strong grip upon the engine is part of what makes the vehicle function as the damage that would certainly disable the engine if the...
P3485 OBD-II Trouble Code: Cylinder 11 Exhaust Valve Control Malfunction
P3485 means an issue with cylinder 11’s exhaust valve control circuit which causes sluggish acceleration and decreased fuel economy.

New key for my truck won't work

You will have to have the dealer reprogram the new key and transponder for it to work with your truck. The dealer will have the special scanner to do the programming. This is typical for most vehicles that have lost...

Is there a voluntary service recall on the 2004 Lincoln Aviator for engine codes p0308/p0316

Hi there. The best way to find voluntary recall information for your vehicle is to click this link (https://www.research.com/recalls/lincoln/aviator-2004) and search based on the state you live. The P0308 trouble code means that the powertrain control module (PCM) has detected...

I have a push door where you just push on the door and it pops open, but it’s not popping open

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com