Saturn LW300 Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a Saturn LW300 Intake Manifold Gaskets Replacement is $524 with $146 for parts and $378 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Saturn LW300V6-3.0LService typeIntake Manifold Gaskets ReplacementEstimate$709.52Shop/Dealer Price$792.00 - $1017.55
2002 Saturn LW300V6-3.0LService typeIntake Manifold Gaskets ReplacementEstimate$685.19Shop/Dealer Price$762.90 - $984.88
2001 Saturn LW300V6-3.0LService typeIntake Manifold Gaskets ReplacementEstimate$685.19Shop/Dealer Price$762.97 - $985.00
Show example Saturn LW300 Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Lucas

11 years of experience
33 reviews
Lucas
11 years of experience
Saturn LW300 V6-3.0L - Oxygen Sensor Replacement (Front/Upper/Upstream, Rear/Lower/Downstream) - Gaithersburg, Maryland
Lucas was punctual, proficient, and professional. He answered all of my questions and gave me sound advice regarding a problem I have with another vehicle.

Theodore

17 years of experience
1794 reviews
Theodore
17 years of experience
Saturn LW300 V6-3.0L - Car is not starting - Bellevue, Washington
Knowledgeable. Spent time showing me the problem.

Ben

42 years of experience
1589 reviews
Ben
42 years of experience
Saturn LW300 V6-3.0L - Oil Change - Houston, Texas

Bryan

6 years of experience
64 reviews
Bryan
6 years of experience
Saturn LW300 V6-3.0L - Oil Change - Culver City, California
Came on time and stress free for me. Thanks

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Saturn LW300 services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Battery Cable
If you experience problems starting and powering the car or find corrosion on the battery terminals, you may need to replace a battery cable.
Symptoms of a Bad or Failing Coolant Temperature Switch (Sensor)
Common signs include poor fuel economy, black smoke coming from the engine, engine overheating, and the Check Engine Light turning on.
P2335 OBD-II Trouble Code: Ignition Coil L Secondary Circuit
P2335 means there is a malfunction in the secondary circuit of ignition coil L, usually due to a problem with an electrical component.

I have a lighting bolt icon on my dashboard

When you overheated the engine the check engine light came on most likely for the engine is hot and the lightning bolt comes on indicating the throttle limit control is on. This means the engine is in failure mode and...

My car idles rough when stopped

This may be a sign of a leaky injector or potentially an incorrect idle air adjustment. A leaky injector can cause a rich fuel condition as it may leak too much fuel into a cylinder not allowing the combustion cycle...

When it rains heavy, my car sputters and I have to play with the. gas petal then it wants to take off 1999 Mitsubishi Montero Sport

Hello - given your symptoms and mileage, the throttle position sensor (https://www.yourmechanic.com/article/how-to-replace-a-throttle-position-sensor-by-mia-bevacqua) is a likely candidate for this behavior. Check for problem codes first to verify the diagnostic code(s) engine management will provide automatically. Most auto parts stores will do...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com