Pontiac Tempest Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Pontiac Tempest Mass Airflow Sensor Replacement is $314 with $219 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1987 Pontiac TempestL4-2.0LService typeMass Airflow Sensor ReplacementEstimate$552.49Shop/Dealer Price$671.87 - $1007.49
1989 Pontiac TempestV6-2.8LService typeMass Airflow Sensor ReplacementEstimate$532.49Shop/Dealer Price$651.88 - $987.52
1988 Pontiac TempestL4-2.0LService typeMass Airflow Sensor ReplacementEstimate$532.49Shop/Dealer Price$651.88 - $987.52
1990 Pontiac TempestV6-3.1LService typeMass Airflow Sensor ReplacementEstimate$532.49Shop/Dealer Price$651.86 - $987.48
1987 Pontiac TempestV6-2.8LService typeMass Airflow Sensor ReplacementEstimate$532.49Shop/Dealer Price$651.90 - $987.55
1990 Pontiac TempestL4-2.2LService typeMass Airflow Sensor ReplacementEstimate$532.49Shop/Dealer Price$651.88 - $987.52
1991 Pontiac TempestL4-2.2LService typeMass Airflow Sensor ReplacementEstimate$537.49Shop/Dealer Price$656.75 - $992.28
1991 Pontiac TempestV6-3.1LService typeMass Airflow Sensor ReplacementEstimate$537.49Shop/Dealer Price$657.12 - $992.94
Show example Pontiac Tempest Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Chris

22 years of experience
2252 reviews
Chris
22 years of experience
Pontiac Tempest V8-5.3L - Pre-purchase Car Inspection - Laguna Niguel, California
Chris did a great job inspecting the vehicle, I live in GA and wanted to purchase a car in CA so I needed an unbiased third party to look at it for me. My primary concern was that the car was represented accurately in the online ad (there are a lot of scams online now), which he did, we had a great conversation after the inspection which did a lot to comfort my concerns. This was a "project" car and needed to be evaluated accordingly, it was something that I had planned on doing a restoration on so I knew it needed some work. My only critique is that when the car was delivered there was a little more rust than I had expected, I wish that he had pointed that out, I accept some of the responsibility for not asking enough questions during our conversation. Overall I am extremely happy with the inspection service and would highly recommend Chris .

H

26 years of experience
828 reviews
H
26 years of experience
Pontiac Tempest L6-3.8L - Brakes, Steering and Suspension Inspection - Los Altos, California
On time. A true gentleman. Skilled with cars that date over many years. He knows older cars including many classics. Younger mechanics probably would know know a thing about a 4BBL Carburetor. One can see that he has a true love of cars & the work he does. This is only one experience so I would hope to see him back when needed.

Carlos

16 years of experience
362 reviews
Carlos
16 years of experience
Pontiac Bonneville V6-3.8L - Mass Airflow Sensor - Keller, Texas
Wow! I'm hooked on Your Mechanic and will schedule Carlos over and over again. He showed up on time, went over the car with a fine toothed comb and patiently explained many things to me. He fixed the problem, replaced the part just like expected and the quote was the same price charged and we are back up and running. I was a skeptic, but I'm sold!

David

37 years of experience
39 reviews
David
37 years of experience
Pontiac G6 L4-2.4L - Mass Airflow Sensor - Austin, Texas
Very helpful and knowledgeable. Changed out a part for me in about 10 mins. (mass air flow sensor) I would recommend him.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of Pontiac Mass Airflow Sensor Replacement services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

How Do Sensors Get Dirty or Damaged?
Car sensors measure and relay vital information to the ECU. Some sensors can get dirty from normal use, or fail if the car overheats or has a problem.
Symptoms of a Bad or Failing Brake Booster Vacuum Sensor
A failing brake booster vacuum sensor will cause the brake pedal to be stiff or turn on the Check Engine Light.
Symptoms of a Bad or Failing EGR Temperature Sensor
Common signs include engine ping or knock, the Check Engine Light coming on, and failing an emissions test.

Crankshaft sensor going out

That is a pretty common failure on the 4.0 engine. Random stalling, long crank, rough idle, or the engine failing to start are all symptoms. Usually a code is stored, but this is not always the case. If you would...

Jerking when accelerating (after slowing down).

Hi there. From my experience with this vehicle the issue is almost always a failure in the throttle body (https://www.yourmechanic.com/services/throttle-body-replacement). It is very common for the throttle body to have an intermittent failure and for it to run like this....

What happens if I don't replace knock sensor?

The knock sensor on the engine is there to detect for an engine noise from pre ignition (pining) normally. This is so the computer can advance the ignition timing to the maximum it can without the engine pinging. This gives...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com