Pontiac Grand Am Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(3)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(3)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Pontiac Grand Am Brake Master Cylinder Replacement is $243 with $103 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Pontiac Grand AmL4-2.4LService typeBrake Master Cylinder ReplacementEstimate$534.52Shop/Dealer Price$633.00 - $920.34
1996 Pontiac Grand AmV6-3.1LService typeBrake Master Cylinder ReplacementEstimate$538.46Shop/Dealer Price$614.15 - $834.20
1993 Pontiac Grand AmL4-2.3LService typeBrake Master Cylinder ReplacementEstimate$538.46Shop/Dealer Price$614.19 - $834.27
1997 Pontiac Grand AmV6-3.1LService typeBrake Master Cylinder ReplacementEstimate$538.46Shop/Dealer Price$614.19 - $834.27
1991 Pontiac Grand AmL4-2.5LService typeBrake Master Cylinder ReplacementEstimate$427.83Shop/Dealer Price$501.62 - $715.50
2002 Pontiac Grand AmL4-2.2LService typeBrake Master Cylinder ReplacementEstimate$559.73Shop/Dealer Price$665.16 - $976.97
1993 Pontiac Grand AmV6-3.3LService typeBrake Master Cylinder ReplacementEstimate$538.46Shop/Dealer Price$614.22 - $834.32
2002 Pontiac Grand AmV6-3.4LService typeBrake Master Cylinder ReplacementEstimate$559.73Shop/Dealer Price$665.02 - $976.72
Show example Pontiac Grand Am Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(3)

Rating Summary
2
0
0
0
1
2
0
0
0
1

Joe

36 years of experience
958 reviews
Joe
36 years of experience
Grand Am 2001 - Brake Master Cylinder - Holiday, FL
Great service thank you.

Willie

17 years of experience
7 reviews
Willie
17 years of experience
Grand Am 2000 - Power steering fluid is leaking - Ocala, FL
He got started and he gave me a great recommendation on my car. I'm very satisfied with his work.

Nathan

13 years of experience
12 reviews
Nathan
13 years of experience
Grand Am 2004 - Serpentine/Drive Belt - Eugene, OR
Did an excellent job. Thank you for not only fixing the problem, but taking the time to inspect the vehicle and letting me know what other services needed to be done.

Nathan

13 years of experience
12 reviews
Nathan
13 years of experience
Grand Am 2004 - Power Steering Pump Pulley - Eugene, OR
Did an excellent job. Thank you for not only fixing the problem, but taking the time to inspect the vehicle and letting me know what other services needed to be done.

Excellent Rating

(3)

Rating Summary
2
0
0
0
1
2
0
0
0
1
Number of Pontiac Grand Am Brake Master Cylinder Replacement services completed
33+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

Is it Safe to Drive With a Faulty Knock Sensor?
Symptoms of a bad or failing engine knock sensor include slow acceleration, reduced fuel economy, and the Check Engine Light turning on.
A Buyer's Guide to the 2012 Volkswagen Beetle
Although Although it may be one of the most recognizable cars on the road, thanks to its unique design, perhaps you’ve never considered owning a Volkswagen Beetle before. There are a number of reasons the 2012 model should have you...
How to Register a Car in New Hampshire
One One of the best places to move to is New Hampshire due to its natural beauty and the great residents that inhabit this state. If you are making a move to New Hampshire, you will have to make sure...

Car keeps idling down and shutting off when I drive it.

Hello there and thanks for writing in. Generally belts will squeak when they are loose or not aligned correctly. Occasionally, they may need to have a bit of belt dressing put on them to lubricate them. Your idle issue may...

Hi Patrick, I was told by my machanic when my engine light sparked in that I need a oxegen sensor, and said that it has to be fixe

Oxygen sensors are tested using an automotive scope or oscilloscope. In your circumstance, if there are more than 100,000 miles on the sensor, the sensor output should be verified on a scope. The mechanic should show you the output waveform...

Hello, I have 2009 Hyundai Sonata with about 114,000 miles on it. The car jerks...sometimes violently when I'm driviing and go to

Hi Taheem. Thanks for contacting us today. It depends on what you mean by "jerking". If the car is pulling to one side while braking, this could indicate a bad caliper, worn brake pads, faulty wheel bearing or even tire...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com