Oldsmobile Regency Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(3)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(3)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Oldsmobile Regency Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 Oldsmobile RegencyV6-3.8LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1998 Oldsmobile RegencyV6-3.8LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Oldsmobile Regency Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0

Natnael

8 years of experience
5 reviews
Natnael
8 years of experience
Oldsmobile Regency V6-3.8L - Door Mirror Replacement (Passenger Side) - Potomac, Maryland
He installed a new outside, electric remote control mirror on my mother's car. On time; professional and cordial. I could not have expected more. Thanks.

TJ

26 years of experience
362 reviews
TJ
26 years of experience
Oldsmobile Aurora V6-3.5L - Windows - Sarasota, Florida
Arrived on time, did a great job on diagnostic

Tyrone

11 years of experience
423 reviews
Tyrone
11 years of experience
Oldsmobile Aurora V8-4.0L - Windows - Alexandria, Virginia
Tyrone is a top-knotch mechanic who does the tasks quick and effective. He also has excellent customer skills. If I need more work on my Oldsmobile, I will definitely touch bases with Tyrone through this web service and see if he is available. I am very comfortable with him working on my Olds and my Mustang (when it is time to do so).

Albert

22 years of experience
81 reviews
Albert
22 years of experience
Oldsmobile Intrigue V6-3.5L - Windows - Cumming, Georgia
He seemed very honest in his assessment of the problem with my car window. Since he had to order a part for the window it hasn’t been fixed yet. I’m hoping everything will turn out well.

Excellent Rating

(3)

Rating Summary
3
0
0
0
0
3
0
0
0
0
Number of Oldsmobile Windows Inspection services completed
33+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

How to Buy a Good Quality GPS
Even Even if you have a smart phone, there are still reasons to invest in a standalone global positioning system (GPS) navigator for your car. Once a destination is entered, the super easy turn-by-turn navigation allows you to see your...
How Long Does a Crankshaft Seal Last?
The The crankshaft seal is located in the crankshaft of your vehicle. The crankshaft converts rotary into linear motion. This means it uses the force created by the pistons in the engine to move in a circular motion so the...
P2012 OBD-II Trouble Code: Intake Manifold Runner Control (IMRC)Circuit Low Bank 2
P2012 P2012 code definition Intake Manifold Runner Control (IMRC) Circuit Low Bank 2 Related Trouble Codes: P2004: IMRC Stuck Open Bank 1 P2005: IMRC Stuck Open Bank 2 P2006: IMRC Stuck Closed Bank 1 P2007: IMRC Stuck Closed Bank 2...

Truck won't start after replacing head gasket

Hi, the way to tell if it was assembled incorrectly is to do a compression test on the engine and see if you have compression on all cylinders. You may have timed the engine incorrectly and this would show up...

My 2002 Ford Crown Victoria is acting like it want to go, even though I'm not pressing on the gas

Hello. The most common cause of the high engine idle accompanied with a delayed acceleration will be a vacuum leak in most cases. This engine gets vacuum leaks (https://www.yourmechanic.com/article/is-it-safe-to-drive-with-a-vacuum-leak) on the vacuum connection on the intake manifold (https://www.yourmechanic.com/services/intake-manifold-gaskets-replacement) for the...

vehicles stalls both while driving and idle, will hesitate to start. howvever sometimes starts and runs without issue. P008B

The p008B code that you listed refers to the low pressure fuel system. For some reason the engine control module is receiving a signal that shows high pressure in the system. This could be caused by a failed low pressure...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com