Oldsmobile Cutlass Cruiser Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(32)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(32)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Oldsmobile Cutlass Cruiser Car Battery Replacement is $276 with $136 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Oldsmobile Cutlass CruiserV6-3.3LService typeCar Battery ReplacementEstimate$445.56Shop/Dealer Price$521.80 - $742.42
1992 Oldsmobile Cutlass CruiserL4-2.5LService typeCar Battery ReplacementEstimate$465.99Shop/Dealer Price$547.82 - $789.20
1990 Oldsmobile Cutlass CruiserV6-3.3LService typeCar Battery ReplacementEstimate$436.55Shop/Dealer Price$511.05 - $730.36
1991 Oldsmobile Cutlass CruiserL4-2.5LService typeCar Battery ReplacementEstimate$465.99Shop/Dealer Price$547.85 - $789.24
1994 Oldsmobile Cutlass CruiserV6-3.1LService typeCar Battery ReplacementEstimate$436.55Shop/Dealer Price$512.52 - $732.94
1991 Oldsmobile Cutlass CruiserV6-3.3LService typeCar Battery ReplacementEstimate$436.55Shop/Dealer Price$511.19 - $730.61
1990 Oldsmobile Cutlass CruiserL4-2.5LService typeCar Battery ReplacementEstimate$436.55Shop/Dealer Price$511.06 - $730.39
1992 Oldsmobile Cutlass CruiserV6-3.3LService typeCar Battery ReplacementEstimate$436.55Shop/Dealer Price$511.05 - $730.36
Show example Oldsmobile Cutlass Cruiser Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(32)

Rating Summary
31
1
0
0
0
31
1
0
0
0

Raul

35 years of experience
285 reviews
Raul
35 years of experience
Oldsmobile Cutlass Cruiser V6-3.3L - Ignition Cable (Spark plug wires) - Hayward, California
Raul obviously knows his way around an engine. He is very professional and also nice to talk to. He explained everything he was going to do and I felt like he enjoyed his work.,and more importantly, I felt that I was informed ,which I appreciate very much. He has a great positive, enthusiastic personality and I would recommend him to anyone who needs reliable mechanical work ;whether you know anything about your own engine or not. I feel I've found somebody I can call whenever I need assistance.

Michael

16 years of experience
11 reviews
Michael
16 years of experience
Oldsmobile Aurora V6-3.5L - Battery - Albuquerque, New Mexico
Punctual, fast, and very professional. Very impressed with this service!

Lavell

29 years of experience
405 reviews
Lavell
29 years of experience
Oldsmobile Cutlass Supreme V6-3.4L - Battery - San Francisco, California
Everything went fine except that I had to reset the clock and radio buttons, which was annoying. There are simple tools to keep the electrons flowing while changing a battery, and I suggest buying one for each of your mechanics. Your customers will thank you for it.

Pedro

32 years of experience
120 reviews
Pedro
32 years of experience
Oldsmobile 88 V6-3.8L - Battery - Hobart, Indiana
Did a fine job on my vehicle. Thorough check of vehicle and suggested further services needed.

Excellent Rating

(32)

Rating Summary
31
1
0
0
0
31
1
0
0
0
Number of Oldsmobile Car Battery Replacement services completed
352+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

P0488 OBD-II Trouble Code: Exhaust Gas Recirculation Throttle Control Circuit "A" Range/Performance
What What the P0488 code means The Powertrain Control Module (PCM) has discovered a problem with the rate of flow of the exhaust gas recirculation (EGR) system. What causes the P0488 code? There are a few potential causes for the...
Should You Buy a Car With a Lien On It?
Buying Buying a new car is a losing proposition. “But wait,” you say. “Look at all the bells and whistles this car has. It’s worth every dollar.” According to Edmunds, after the first mile of ownership, your vehicle has already...
Rules of the Road For Tennessee Drivers
Whether Whether you’ve recently moved to Tennessee, you’re visiting on vacation, or you’ve lived in this beautiful state your whole life, you might be surprised at some of the specific state traffic laws you’ll find here. To make sure you’re...

Revving and humming noise while driving - 2006 Scion xA

It sounds like your cooling fan (https://www.yourmechanic.com/services/cooling-radiator-fan-motor-replacement) kicking on and off. It's even louder and more pronounced when the AC is on. The strain on the engine also will cause the RPMs to jump up a little bit during these...

Electrical issues with the gauges, interior lights, and rear wiper blade.

Hi there. When it comes to multiple systems and the electrical circuits malfunction, there is a power and ground issue. Check the battery cables and clean them with a tooth brush and baking soda with water. This will clean off...

93 Buick will not excelerate passed 30 put in new transmission hose and radiator. Can u please tell me what u think the problem is

Hi there. In some cases, when you have acceleration problems after changing a transmission hose, the issue is related to either an obstruction in the transmission fluid lines or the torque converter not receiving or having enough transmission fluid (slipping)....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com