Oldsmobile Bravada Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(33)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(33)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Oldsmobile Bravada Valve Cover Gasket Replacement is $185 with $31 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Oldsmobile BravadaV6-4.3LService typeValve Cover Gasket ReplacementEstimate$616.82Shop/Dealer Price$697.21 - $921.37
2004 Oldsmobile BravadaL6-4.2LService typeValve Cover Gasket ReplacementEstimate$952.87Shop/Dealer Price$1031.64 - $1248.95
2001 Oldsmobile BravadaV6-4.3LService typeValve Cover Gasket ReplacementEstimate$597.90Shop/Dealer Price$674.63 - $896.05
1996 Oldsmobile BravadaV6-4.3LService typeValve Cover Gasket ReplacementEstimate$597.90Shop/Dealer Price$674.63 - $896.05
2003 Oldsmobile BravadaL6-4.2LService typeValve Cover Gasket ReplacementEstimate$952.87Shop/Dealer Price$1038.53 - $1261.01
1993 Oldsmobile BravadaV6-4.3LService typeValve Cover Gasket ReplacementEstimate$267.07Shop/Dealer Price$285.53 - $334.64
1992 Oldsmobile BravadaV6-4.3LService typeValve Cover Gasket ReplacementEstimate$281.67Shop/Dealer Price$300.15 - $349.26
2000 Oldsmobile BravadaV6-4.3LService typeValve Cover Gasket ReplacementEstimate$597.90Shop/Dealer Price$674.63 - $896.05
Show example Oldsmobile Bravada Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(33)

Rating Summary
28
1
1
1
2
28
1
1
1
2

Junard

12 years of experience
161 reviews
Junard
12 years of experience
Oldsmobile Bravada L6-4.2L - Valve Cover Gasket - Philadelphia, Pennsylvania
He installed my alternator very well, worked hours until he installed it real well.

Benjamin

32 years of experience
18 reviews
Benjamin
32 years of experience
Oldsmobile Bravada V6-4.3L - Clunking or knocking noise from wheels Inspection - Whitinsville, Massachusetts
Very pleasant to talk to. Also explained everything as it was being done. They are here to help you.

Daniel

22 years of experience
346 reviews
Daniel
22 years of experience
Oldsmobile Bravada V6-4.3L - Axle / CV Shaft Assembly Replacement (Driver Side Front) - Spring, Texas
Very fast and great customer service. Daniel knows what he is doing. Will recommend him for any other repair. Thanks Daniel

Aaron

30 years of experience
132 reviews
Aaron
30 years of experience
Oldsmobile Bravada V6-4.3L - Stabilizer Bar Bushings Replacement (Front) - Tallahassee, Florida
Aaron was on time and I have no complaints

Excellent Rating

(33)

Rating Summary
28
1
1
1
2
28
1
1
1
2
Number of Oldsmobile Bravada services completed
363+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

How to Renew Your Car Registration in Colorado
In In order for residents of Colorado to drive their cars legally on the roadways, they will need to be registered with the DMV. Every year, this registration will have to be renewed in order for the car to remain...
A Buyer’s Guide to the 2012 Audi Q7
When When only the most exacting performance will do, but you want an SUV that delivers third row seating and is comfortable enough for family trips, the 2012 Audi Q7 should be on your list. Key Features While it is...
A Buyer’s Guide to the 2012 Volkswagen Golf
The The 2012 Volkswagen Golf offers comfort and an elegant design for a variety of transportation needs. The Golf is a solid vehicle, good size, and great value, especially when it comes to comparing prices of similar vehicles. Key Features...

Keep burning through head gaskets

Unfortunately this is a well know problem with the Chevrolet Equinox's. It really has nothing to do with driving habits, or lack of maintenance, but on the design of the engine cooling system, particularly the design of the head gaskets....

Uneven tread wear and vibrating

I believe you have some suspension problems. If you have worn balljoints, then you will have a problem with uneven wear and tear on your tires. Also, you could have a problem with your control arms. The front of your...

Using conventional 80W90 gear oil instead of FS 75W90 can be a problem ?

The gear oil you put in the transmission will not cause the transmission to slip or cause loss of power due to clutch slippage. You should only use the recommended oils in the transmission or it may damage bearings and...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com