Oldsmobile Aurora Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(38)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(38)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Oldsmobile Aurora Power Steering Pump Replacement is $266 with $126 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Oldsmobile AuroraV8-4.0LService typePower Steering Pump ReplacementEstimate$406.92Shop/Dealer Price$473.50 - $665.14
1997 Oldsmobile AuroraV8-4.0LService typePower Steering Pump ReplacementEstimate$448.95Shop/Dealer Price$526.52 - $755.12
2001 Oldsmobile AuroraV6-3.5LService typePower Steering Pump ReplacementEstimate$426.71Shop/Dealer Price$498.75 - $710.68
1996 Oldsmobile AuroraV8-4.0LService typePower Steering Pump ReplacementEstimate$448.95Shop/Dealer Price$526.55 - $755.16
2002 Oldsmobile AuroraV8-4.0LService typePower Steering Pump ReplacementEstimate$397.91Shop/Dealer Price$464.22 - $655.66
1995 Oldsmobile AuroraV8-4.0LService typePower Steering Pump ReplacementEstimate$448.95Shop/Dealer Price$526.69 - $755.41
1998 Oldsmobile AuroraV8-4.0LService typePower Steering Pump ReplacementEstimate$448.95Shop/Dealer Price$526.56 - $755.19
2002 Oldsmobile AuroraV6-3.5LService typePower Steering Pump ReplacementEstimate$426.71Shop/Dealer Price$498.75 - $710.68
Show example Oldsmobile Aurora Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(38)

Rating Summary
35
2
0
0
1
35
2
0
0
1

Ronnie

31 years of experience
152 reviews
Ronnie
31 years of experience
Oldsmobile Aurora V8-4.0L - Power Steering Pump - Nashville, Tennessee
Ronnie was great! Accommodating, knowledgeable, and efficient.

Martin

30 years of experience
166 reviews
Martin
30 years of experience
Oldsmobile Aurora V8-4.0L - AC Condenser Fan - Hermitage, Tennessee
He was a very nice and honest person did excellent work.

TJ

27 years of experience
362 reviews
TJ
27 years of experience
Oldsmobile Aurora V6-3.5L - Windows - Sarasota, Florida
Arrived on time, did a great job on diagnostic

Russell

28 years of experience
271 reviews
Russell
28 years of experience
Oldsmobile Aurora V8-4.0L - Car is not starting - Oakland, California
Seemed very experienced, professional, and knowledgeable.

Excellent Rating

(38)

Rating Summary
35
2
0
0
1
35
2
0
0
1
Number of Oldsmobile Aurora services completed
418+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Chevrolet Camaro
The The 2012 Chevrolet Camaro is an exciting car that says a lot about American drivers and what we want. While fuel prices are high and the economy is just barely starting to resurge and stabilize after years of recession,...
P0757 OBD-II Trouble Code: Shift Solenoid B Stuck On
P0757 code means the PCM has registered an irregularity within the shift solenoid B often due too hydraulic blockages internally or malfunctioning.
How to Replace a Traction Control Module
The traction control module (TCM) can reduce engine power or apply braking to an individual wheel to prevent wheel spin in rain, ice, or snow.

Need diagram of firing order on distributor to connect plug wires

An accurate firing order diagram can be found online by typing "01 diamante firing order" in the search bar. An accurate diagram is required, as the vehicle will not run properly if the firing ignition wires are not installed in...

The four wheel drive system is not engaging the front wheels

From what you are describing it sounds like you have either a failure in the transfer case (https://www.yourmechanic.com/services/transfer-case-output-shaft-seal-replacement) or in the front axle actuator. I usually drain the fluid from the transfer case first and check it for metal. If...

What oil should I use in my 04 Audi A4 3.0L V6 Quattro S Line, either 5W30 or 0W40-10W40?

Viscosities of 5W-40, 5W-30, 0W-40, and 0W-30 are all specified for your model, the main selection criteria being the ambient temperature you are operating in. If you are in Alaska, use 0W-30. If you are in the southeastern desert, use...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com