Nissan Quest Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(251)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(251)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Nissan Quest Power Steering Pump Replacement is $353 with $213 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Nissan QuestV6-3.0LService typePower Steering Pump ReplacementEstimate$745.38Shop/Dealer Price$893.06 - $1327.19
2013 Nissan QuestV6-3.5LService typePower Steering Pump ReplacementEstimate$3239.01Shop/Dealer Price$4003.70 - $6292.40
2011 Nissan QuestV6-3.5LService typePower Steering Pump ReplacementEstimate$1157.01Shop/Dealer Price$1401.23 - $2128.46
2007 Nissan QuestV6-3.5LService typePower Steering Pump ReplacementEstimate$820.87Shop/Dealer Price$974.12 - $1427.62
1999 Nissan QuestV6-3.3LService typePower Steering Pump ReplacementEstimate$616.47Shop/Dealer Price$727.47 - $1050.73
2014 Nissan QuestV6-3.5LService typePower Steering Pump ReplacementEstimate$3239.01Shop/Dealer Price$4003.91 - $6292.77
2005 Nissan QuestV6-3.5LService typePower Steering Pump ReplacementEstimate$820.87Shop/Dealer Price$974.15 - $1427.66
2016 Nissan QuestV6-3.5LService typePower Steering Pump ReplacementEstimate$3239.01Shop/Dealer Price$4003.73 - $6292.45
Show example Nissan Quest Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(251)

Rating Summary
231
12
2
2
4
231
12
2
2
4

Michael

35 years of experience
28 reviews
Michael
35 years of experience
Quest 2004 - Alternator - San Antonio, TX
Awesome Mechanic very honest professional knowledgeable and goes above and beyond. I will definitely request him, personally, to fix all of my cars in the future.

Michael

35 years of experience
28 reviews
Michael
35 years of experience
Quest 2004 - Battery - San Antonio, TX
Awesome Mechanic very honest professional knowledgeable and goes above and beyond. I will definitely request him, personally, to fix all of my cars in the future.

Alejandro

10 years of experience
21 reviews
Alejandro
10 years of experience
Quest 1996 - Brake System Inspection - Los Angeles, CA

James

21 years of experience
49 reviews
James
21 years of experience
Quest 2004 - Loud squealing or squeaking is coming from timing belt - Kennesaw, GA
Excellent service! Thank you so much!!

Excellent Rating

(251)

Rating Summary
231
12
2
2
4
231
12
2
2
4
Number of Nissan Quest services completed
2761+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1600+
experts on our platform

Recent articles & questions

P0469 OBD-II Trouble Code: Purge Flow Sensor Circuit Intermittent
P0469 means the evaporative (fuel) system has a problem with the purge flow sensor, often due to a damaged charcoal canister or faulty flow sensor.
B1927 OBD-II Trouble Code: Passenger Side Airbag Fault
B1927 means there is an issue with the passenger side air bag, usually due to defective electrical components.
B1963 OBD-II Trouble Code: Seat Horizontal Forward/Rearward Potentiometer Feedback Circuit Open
B1963 means there is a circuit malfunction in the power seat potentiometer, likely due to a faulty potentiometer or damaged electrical parts.

What does the malfunction indicator Warning Light mean?

The malfunction indicator Warning Light is located on the instrument panel. When this light illuminates and blinks, then the vehicle has detected that the engine is misfiring. When the light illuminates and is steady, then there is an issue with...

The battery light is showing on the dashboard

This may be a sign of a weak battery, a failing voltage regulator or failing alternator. As you may know, the alternator is responsible for charging the battery while the engine runs by generating amperage and recharging the battery while...

If I replace my air temp I think it's call ambient temp sensor do I need more freon? 2011 Chrysler 200

Hello - you don't indicate what specific code was extracted, but I believe you are referring to the engine intake air sensor (https://www.yourmechanic.com/article/p0095-obd-ii-trouble-code-intake-air-temperature-sensor-2-circuit-by-andrew-quinn), usually in the air cleaner box or air inlet housings. This sensor is not related to the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com