Nissan NV2500 Hazard / Turn Signal Flasher Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Hazard / Turn Signal Flasher Replacement Service

How much does a Hazard / Turn Signal Flasher Replacement cost?

On average, the cost for a Nissan NV2500 Hazard / Turn Signal Flasher Replacement is $198 with $103 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Nissan NV2500V8-5.6LService typeHazard / Turn Signal Flasher ReplacementEstimate$321.45Shop/Dealer Price$383.07 - $545.41
2014 Nissan NV2500V6-4.0LService typeHazard / Turn Signal Flasher ReplacementEstimate$301.45Shop/Dealer Price$363.08 - $525.44
2018 Nissan NV2500V8-5.6LService typeHazard / Turn Signal Flasher ReplacementEstimate$301.45Shop/Dealer Price$363.08 - $525.44
2017 Nissan NV2500V8-5.6LService typeHazard / Turn Signal Flasher ReplacementEstimate$301.45Shop/Dealer Price$363.06 - $525.40
2017 Nissan NV2500V6-4.0LService typeHazard / Turn Signal Flasher ReplacementEstimate$301.45Shop/Dealer Price$363.10 - $525.47
2016 Nissan NV2500V6-4.0LService typeHazard / Turn Signal Flasher ReplacementEstimate$301.45Shop/Dealer Price$363.08 - $525.44
2015 Nissan NV2500V6-4.0LService typeHazard / Turn Signal Flasher ReplacementEstimate$306.45Shop/Dealer Price$367.95 - $530.20
2012 Nissan NV2500V6-4.0LService typeHazard / Turn Signal Flasher ReplacementEstimate$306.45Shop/Dealer Price$368.32 - $530.86
Show example Nissan NV2500 Hazard / Turn Signal Flasher Replacement prices

What is the Hazard / Turn Signal Flasher all about?

The hazard / turn signal flasher is a small, electrical device that causes the lights on your vehicle to flash in a rhythmic, steady fashion. It is usually located under the driver’s side of the dash, and is wired in-line with the turn signal lever and hazard switch buttons. When the turn signals or hazard lights are turned on, the circuit’s power is routed through the flasher, which only emits short bursts of power that cause the lights to flash. If the flasher is not working, your hazard or turn signal lights may stay on solid when turned on, not turn on at all, or flash at an undesirable rate.

Keep in mind:

  • Flasher units hardly ever develop problems. Although in older vehicles, the wiring can become compromised.
  • Don’t assume that the problem is with the flasher – it could be something as simple as a blown fuse.
  • Check your bulbs, and replace them if necessary.

How it's done:

  • The vehicle's hood is opened and supported manually
  • The new relays are installed onto a mounting bracket
  • The wiring is connected to the relays and into the vehicle harness
  • The hood manual support is removed
  • The install is verified and the hazard lights are tested for proper operation

Our recommendation:

If your turn signals aren’t working, you will fail a motor vehicle inspection or a roadside check. Examine your fuses to make sure none are discolored – this indicates a blown fuse that could be causing the problem. Check your light bulbs as well. If all are in good working order, then the problem could be the hazard / turn signal flasher, which is part of your car's electrical system. Have one of our expert mechanics inspect and replace the hazard turn signal flasher if required.

What common symptoms indicate you may need to replace the Hazard / Turn Signal Flasher?

  • No turn signals on either side
  • Turn signal on only one side
  • Turn signals light up but don’t flash
  • Turn signal flashes too slow
  • Turn signal flashes too fast
  • Hazard lights don’t work

How important is this service?

Malfunctioning turn signals and hazard lights are critical safety issues. If your turn signals aren’t working, you have no way of communicating your driving intentions to other drivers aside from hand signals. Have one of our expert mechanics check them immediately so that the problem can be diagnosed, and appropriate measures taken, such as replacing your hazard / turn signal flasher.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

Michael

15 years of experience
52 reviews
Michael
15 years of experience
Nissan NV2500 V8-5.6L - Brake Rotor/Disc Replacement (Front) - Jacksonville, Florida
Great experience!

Dameron

17 years of experience
172 reviews
Dameron
17 years of experience
Nissan NV2500 V6-4.0L - Brake Rotor/Disc Replacement (Rear) - Indianapolis, Indiana
On time very knowledgeable will definitely use him again

Carlos

28 years of experience
504 reviews
Carlos
28 years of experience
Nissan NV2500 V8-5.6L - Pre-purchase Car Inspection - Fontana, California
Super helpful and detailed. Explained everything to me over the phone and was super communicative about timing.

Russell

27 years of experience
271 reviews
Russell
27 years of experience
Nissan NV2500 V6-4.0L - Car is not starting - Hayward, California
My truck was having battery issues and Russell managed to get things running smoothly!

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of Nissan NV2500 services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

How Long Does an ECM-Power Relay Last?
As As technology continues to advance and move forward, so does the way our vehicles operate and run. It seems more and more parts rely on computers and sensors than ever before. The ECM-power relay is an excellent example of...
P0762 OBD-II Trouble Code: Shift Solenoid C Stuck On
P0762 code means the car’s computer has detected an unusual operation within shift solenoid C often due too low/dirty fluids or poor wire connections.
How to Replace Axle Seals
Axle seals fail when there is a visible leak or a major puddle of gear oil underneath the vehicle. In some cases, the axle may pop out entirely.

Should there be any play on the CV shaft where it goes into the transmission?

Typically, on the inboard joint of a CV axle, you will be able to readily detect (feel) movement because the shaft into the transmission rides on a bushing that has some clearance. If the movement is "excessive", that could mean...

I have a rubbing noise when i turn the wheel when sitting still but not at speed and i also have a lot of clunk noise over bumps.

Hi William. Thanks for contacting us today. Based on what you've indicated, it's quite possible that there could be multiple front end issues going on with your Saturn. The fact your CV boots are torn could indicate a failure of...

My car makes noises when I make a turn

If you did not get all the air out of the system or fluid leaks then you may be low on fluid. You should also make sure you used Honda approved fluid type. If it is not low or incorrect...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com