Nissan 720 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Nissan 720 Power Steering Pressure Hose Replacement is $257 with $162 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1984 Nissan 720L4-2.4LService typePower Steering Pressure Hose ReplacementEstimate$726.29Shop/Dealer Price$889.12 - $1355.09
1986 Nissan 720L4-2.4LService typePower Steering Pressure Hose ReplacementEstimate$706.29Shop/Dealer Price$869.13 - $1335.12
1986 Nissan 720L4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$721.29Shop/Dealer Price$887.88 - $1365.12
1985 Nissan 720L4-2.5L DieselService typePower Steering Pressure Hose ReplacementEstimate$419.57Shop/Dealer Price$510.71 - $761.64
1983 Nissan 720L4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$721.29Shop/Dealer Price$887.90 - $1365.15
1983 Nissan 720L4-2.4LService typePower Steering Pressure Hose ReplacementEstimate$706.29Shop/Dealer Price$869.13 - $1335.12
1984 Nissan 720L4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$726.29Shop/Dealer Price$892.75 - $1369.88
1986 Nissan 720L4-2.5L DieselService typePower Steering Pressure Hose ReplacementEstimate$424.57Shop/Dealer Price$515.97 - $767.10
Show example Nissan 720 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

Kevo

312 years of experience
189 reviews
Kevo
312 years of experience
Nissan 720 L4-2.4L - Oil Change - North Highlands, California

Chris

20 years of experience
448 reviews
Chris
20 years of experience
Nissan 720 L4-2.2L - Clutch Slave Cylinder - Portland, Oregon
My clutch slave cylinder required a special bleeding procedure to achieve maximum performance, as noted in the original Nissan Service Manual, and Chris knew this and performed the procedure as required in the manual. This knowledge impressed me. Chris was also courteous and easy to talk to about other fixes needed on my vehicle. A very satisfying experience, although the job was fairly simple.

Nazareth

27 years of experience
275 reviews
Nazareth
27 years of experience
Nissan 720 L4-2.4L - Car does not shift from park to drive - Altadena, California
Very friendly professional mechanic. He diagnosed the problem right away and offered great advice.

Jay

37 years of experience
947 reviews
Jay
37 years of experience
Nissan 720 L4-2.4L - Brakes, Steering and Suspension Inspection - Redlands, California
The main thing is Jay is on time and knowledgeable. If he can't fix something he knows who can. He checks everything.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of Nissan 720 services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

P0194 OBD-II Trouble Code: Fuel Rail Pressure Sensor ‘A’ Circuit Intermittent/Erratic
P0194 P0194 code definition Fuel rail pressure sensor ‘A’ circuit intermittent/erratic What the P0194 code means The P0194 code is specific to diesel engines and will not likely be used in reference to gas engines. The test associated with this...
P0844 OBD-II Trouble Code: Transmission Fluid Pressure Sensor/Switch A Circuit Intermittent
P0844 means there is an issue with the voltage signal from the transmission fluid pressure sensor, possibly due to a faulty sensor or fluid issues.
B1873 OBD-II Trouble Code: Turn Signal / Hazard Power Feed Circuit Short to Ground
B1873 means there is an issue with the circuit involving the turn signal and hazard light power feed, likely due to a damaged electrical component.

Hi, I got into a car accident with my bmw e36 and nothing but a dent in the middle of the grilles. Car would start but wouldn't mo

Hello. From what you describe it sounds as if your vehicle may be experiencing more than one issue. Brakes not functioning are usually caused by serious issues with the brake system. If they are not functioning at all then that...

I have a 2007 Dodge charger and yesterday it made a loud pop noise and once i made it home all my water was on the ground!!!

Hi there. The sound you heard was likely a lower coolant hose popping or the radiator itself splitting, causing the coolant to rapidly exit the system. This is a rather serious problem, so I would highly recommend having a professional...

Clutch screeches after downshifting and slowing down, only when going very slow

The noise is most likely coming from the clutch release bearing and when pressure is put on it the bearing it is binding up. You may need to have the clutch and release bearing replaced.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com